Zmoon Rechargeable LED Headlamp (Model 9683) Instruction Manual

1. Product Overview

The Zmoon Rechargeable LED Headlamp (Model 9683) is designed for various outdoor activities, providing powerful illumination with multiple lighting modes and a long-lasting battery. Its durable aluminum construction and IP67 waterproof rating ensure reliability in challenging environments.

Package Contents:

• Rechargeable Headlamp (x2)
• 3000mAh Battery (x6)
• Hard Hat Clips (x12)
• Type-C Cable (x2)
• Instruction Manual (x2)

2. Safety Information

• Eye Safety: Do not look directly into the LED light or shine it directly into the eyes of others. The high intensity light can cause temporary vision impairment or permanent eye damage.
• Battery Safety: Use only the specified 3000mAh Lithium-Ion batteries. Do not mix old and new batteries, or different types of batteries. Do not expose batteries to fire or extreme temperatures.
• Water Resistance: The headlamp is IP67 waterproof, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. However, the battery case is not waterproof. Ensure the Type-C charging port cover is securely closed when exposed to water.
• Heat: The headlamp may become warm during prolonged use, especially on high brightness modes. This is normal. Avoid direct contact with the lamp head when hot.
• Children: Keep out of reach of children.

3. Setup

3.1 Battery Installation

Open the battery compartment located at the rear of the headlamp. Insert the three 3000mAh Lithium-Ion batteries according to the polarity markings (+/-) inside the compartment. Close the battery compartment securely.

3.2 Adjusting the Headband

The headlamp features a stretchable, adjustable headband. Adjust the straps to ensure a snug and comfortable fit on your head or over a hard hat. The lamp head can be tilted up to 90 degrees to direct the light as needed.

3.3 Charging the Headlamp

Connect the provided Type-C cable to the Type-C input interface on the battery pack. Connect the other end to a USB power source (e.g., wall adapter, power bank, computer). The power display indicators will illuminate to show charging status. A full charge provides approximately 8-10 hours of light in high brightness mode and up to 40 hours in energy-saving mode.

The headlamp's battery pack also functions as a 9000mAh power bank. To charge external devices, connect your device's USB cable to the USB output interface on the battery pack.

4. Operating Instructions

4.1 Power On/Off and Lighting Modes

Press the main switch button to cycle through the three lighting modes:

1. High Brightness Mode: Provides maximum illumination (up to 2000 lumens).
2. Energy-Saving Mode: Offers reduced brightness for extended battery life.
3. Strobe Mode: Flashing light for signaling or emergency situations.

Press the button again after Strobe Mode to turn the headlamp off.

4.2 Zoom Function (Spotlight/Floodlight)

The headlamp features a telescopic zoom adjustment. Slide the front part of the lamp head forward or backward to adjust the beam from a narrow spotlight (minimum 10-degree angle) for long-range visibility (up to 3280 feet) to a wide floodlight (maximum 120-degree angle) for broad area illumination.

4.3 Infrared Induction Sensor Mode

To activate the induction sensor mode, long press the main switch button for 3 seconds. Once activated, you can turn the headlamp on or off by simply waving your hand in front of the infrared induction sensor (located on the right side of the lamp head). Long press the switch again for 3 seconds to exit sensor mode.

5. Maintenance

5.1 Cleaning

Wipe the headlamp body with a soft, damp cloth. Do not use abrasive cleaners or solvents. The elastic headband is detachable and washable for easy cleaning.

5.2 Battery Care

To prolong battery life, charge the batteries fully before first use and periodically if the headlamp is stored for extended periods. Store the headlamp and batteries in a cool, dry place.

5.3 Water Resistance

The headlamp is rated IP67 waterproof. This means it is protected against dust ingress and can be submerged in up to 1 meter of water for 30 minutes. Ensure all port covers are sealed tightly before exposing the headlamp to water. The battery case itself is not waterproof; protect it from direct water exposure.

6. Troubleshooting

• Headlamp not turning on:
  • Check if batteries are correctly installed with proper polarity.
  • Ensure batteries are charged.
  • Verify the main switch button is functioning.
• Dim light output:
  • Batteries may be low; recharge them.
  • Ensure the headlamp is not in energy-saving mode.
• Sensor mode not responding:
  • Ensure sensor mode is activated (long press switch for 3 seconds).
  • Clean the sensor area to remove any obstructions.
• Charging issues:
  • Check Type-C cable connection and USB power source.
  • Ensure batteries are properly inserted.

7. Specifications

8. Warranty and Support

Zmoon provides a 3-year warranty for this product, covering manufacturing defects and non-human-caused failures such as headlamp malfunction, battery aging, or headband breakage.

If any accessories are missing from your package or you encounter any issues with your Zmoon headlamp, please contact Zmoon customer support for assistance and replacement parts. Our team is dedicated to resolving any after-sales problems promptly.