Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your weaxty W Mid Back Home Office Chair. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Retain this manual for future reference.
Safety Information
- The maximum weight recommendation for this chair is 350 lbs (approximately 158 kg). Do not exceed this weight limit.
- Assembly is required. Follow all assembly instructions carefully.
- This chair is designed for use on hard floor surfaces.
- Use the product only for its intended purposes, such as office and gaming use.
- Regularly inspect all bolts and screws to ensure they are tightened.
- Keep children away from small parts during assembly.
Package Contents
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, contact customer support.
- Backrest
- Seat Cushion
- Armrests (2)
- Gas Lift Cylinder
- Star Base
- Casters (5)
- Mechanism Plate
- Hardware Pack (screws, washers, Allen wrench)
- User Manual (this document)
Assembly Instructions
Follow these steps carefully to assemble your office chair. It is recommended to assemble the chair on a soft, clean surface to prevent damage.
- Attach Casters to Base: Insert each of the five casters into the holes at the end of each leg of the star base. Push firmly until they click into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled star base.
- Attach Mechanism Plate: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the lever is on the right side when seated. Secure with screws using the provided Allen wrench.
- Attach Armrests: Secure the armrests to the sides of the seat cushion using the designated screws. Do not overtighten initially.
- Attach Backrest: Align the backrest with the mounting points on the armrests and the seat mechanism. Secure with screws. Once all screws are in place for the armrests and backrest, tighten them evenly.
- Connect Seat to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center hole of the mechanism plate aligns with the top of the gas lift. Press down firmly to secure.
Operating Instructions
1. Height Adjustment
To adjust the chair's height, locate the lever on the right side beneath the seat. Pull the lever upwards while seated to lower the chair, or stand up and pull the lever upwards to raise the chair. Release the lever at your desired height.
2. Swivel Function
The chair features a 360-degree swivel function, allowing for easy rotation without moving the base. This provides flexibility and accessibility within your workspace.
3. Tilt Function
While the chair does not feature a full reclining function, it offers a tilt adjustment for comfort. The mechanism allows for a slight backward tilt of the seat and backrest together. To engage or disengage the tilt, refer to the lever or knob located under the seat, typically on the left side or front. Adjust the tension of the tilt mechanism by rotating the tension knob (if present) to suit your preference.
Maintenance and Care
- Cleaning: For general cleaning, wipe the chair with a soft, damp cloth. For spills or stains, spot clean immediately using a mild fabric cleaner suitable for suede or faux leather. Test any cleaning solution on an inconspicuous area first.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability and safety.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the chair's finish and fabric.
- Protect from Sunlight: Prolonged exposure to direct sunlight can cause fading and material degradation. Position the chair away from direct sunlight when possible.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair is unstable or wobbly | Loose screws or uneven assembly. | Check and tighten all assembly screws. Ensure the chair is on a flat, even surface. |
| Height adjustment not working | Gas lift cylinder malfunction or lever not engaged. | Ensure the height adjustment lever is fully engaged. If the issue persists, the gas lift may need replacement. Contact customer support. |
| Casters not rolling smoothly | Debris in casters or damaged casters. | Clean any hair or debris from the caster wheels. If damaged, casters may need replacement. |
| Squeaking noises | Loose connections or friction between parts. | Tighten all screws. Apply a small amount of silicone lubricant to moving parts if necessary, avoiding contact with fabric. |
Specifications
- Brand: weaxty W
- Model Number: c3558c2f-169d-475c-b0d0-d9a1b17f1fd5
- Color: Brown, Suede Fabric
- Product Dimensions (D x W x H): 18.9" x 28.35" x 35.24"
- Seat Height: 19.3" - 21.7" (Adjustable)
- Seat Depth: 18.9 inches
- Maximum Weight Recommendation: 350 lbs
- Material: Suede Fabric (Faux Leather), High-Density Foam Fill
- Base Material: Aluminum Alloy
- Special Features: Adjustable Height, Arm Rest, Ergonomic Design, Rolling Casters, 360-degree Swivel
- Style: Mid-Century Modern
- Recommended Uses: Office, Gaming
- Item Weight: 28 pounds
Warranty and Support
For warranty information or technical support, please refer to the purchase documentation or contact weaxty W customer service directly. Keep your proof of purchase for any warranty claims.
Contact information can typically be found on the seller's page or through the retailer where the product was purchased.