1. Important Safety Information
Please read and understand all instructions and safety warnings before assembling, installing, or operating this product. Failure to do so may result in injury or product damage. Retain this manual for future reference.
- This product is intended for outdoor use in covered areas only. Keep away from direct water exposure.
- Unplug the unit during severe weather conditions, such as heavy rain, snow, or strong winds.
- Do not allow children to play on or near the display. This is not a toy.
- Keep the product away from flammable materials, including but not limited to curtains, drapes, and other combustible fabrics.
- Always supervise children when the display is in use.
- Do not operate the product if it appears damaged or broken. Inspect all components before each use.
- Ensure the power cord is not pinched, cut, or damaged. Do not overload electrical outlets.
- Use only the power adapter supplied with this product.
2. Package Contents
Carefully unpack all components and verify that all items are present and undamaged. If any parts are missing or broken, do not attempt to assemble or operate the product. Contact customer support for assistance.
- Animated Pirate Skeleton Figure (main body, head, arms, clothing)
- Base Stand (metal frame)
- Power Adapter
- Instruction Manual (this document)
Image 1: The complete 6 ft Animated LED Pirate Skeleton prop, holding a bottle and a treasure chest.
3. Setup Instructions
Follow these steps to assemble and set up your animated pirate skeleton prop.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, flat surface to ensure all pieces are accounted for.
- Assemble the Base: Connect the metal frame pieces to form the base stand. Ensure all connections are secure. The base provides stability for the prop.
- Attach the Skeleton Figure: Carefully place the animated pirate skeleton figure onto the assembled base stand. Ensure the figure is firmly seated and stable. There may be designated slots or pegs for attachment.
Image 2: Side view of the animated pirate skeleton, showing the figure securely attached to its metal base.
- Position the Prop: Place the assembled prop in your desired outdoor covered location. Ensure it is on a stable, level surface and away from high traffic areas where it might be accidentally knocked over.
Image 3: The pirate skeleton prop positioned in a Halloween-themed setting, demonstrating its intended use.
- Connect Power: Plug the power adapter into the designated port on the prop (usually located at the back or base). Then, plug the adapter into a standard electrical outlet. Ensure the outlet is suitable for outdoor use if applicable, and protected from moisture.
4. Operating Instructions
The animated pirate skeleton features motion sensor activation, LED lighting, and spoken phrases.
- Power On: Once plugged in, the prop will enter standby mode.
- Motion Sensor Activation: The prop is equipped with a motion sensor. When motion is detected within its range, the pirate skeleton will activate.
Image 4: The pirate skeleton prop in a dimly lit environment, illustrating its 6-foot height and presence.
- Animated Movements: Upon activation, the pirate skeleton's head, jaw, and arms will move.
Image 5: A close-up view of the pirate skeleton's head, demonstrating the animated head and jaw movement during operation.
- LED Eye: The pirate skeleton features an LED light-up eye that illuminates during activation.
Image 6: A detailed view of the pirate skeleton's head, showcasing its illuminated red LED eye.
- Spoken Phrases: The prop will speak one of its 5 different spooky phrases when activated.
Image 7: The pirate skeleton's head, illustrating its ability to speak multiple phrases.
- Power Off: To turn off the prop, simply unplug the power adapter from the electrical outlet.
5. Maintenance
Proper care and maintenance will extend the life of your animated prop.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to gently wipe down the surface of the prop. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the electronics or finish.
- Storage: When not in use, store the prop in its original packaging or a protective container in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the prop is completely dry before storing.
- Inspection: Periodically inspect the power cord, connections, and the prop itself for any signs of wear, damage, or loose parts. If damage is found, discontinue use and contact customer support.
6. Troubleshooting
If your animated pirate skeleton is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Prop does not activate (no movement, sound, or light). |
|
|
| Movements are erratic or incomplete. |
|
|
| LED eye does not light up. |
|
|
| No sound or phrases. |
|
|
7. Specifications
| Model Number | Skeleton |
| Product Dimensions (H x W x D) | 74 in x 33.46 in x 24 in (188 cm x 85 cm x 61 cm) |
| Item Weight | 25 lb (11.3 kg) |
| Frame Material | Metal |
| Light Color | Multicolor (LED eye is red) |
| Number of Light Sources | 1 (LED eye) |
| Number of Movements | 3 (Head, Jaw, Arms) |
| Number of Phrases | 5 |
| Power Type | Plug-in (AC Adapter) |
| Indoor/Outdoor Use | Indoor / Outdoor Covered |
| Certifications | ETL Listed, FCC Listed |
8. Warranty and Support
This product is manufactured by Booksandtoys.
For specific warranty details, please refer to the manufacturer's documentation included with your purchase or contact the seller directly. General return policies typically allow for returns within 30 days of purchase for refund or replacement.
For technical assistance or inquiries regarding parts, please contact the manufacturer or your retailer.
Manufacturer: Booksandtoys
