Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your MK x WLMOUSE Beast X Max Wireless 8K Mouse. Designed for high-performance use, this mouse features advanced optical technology and a lightweight magnesium alloy frame for optimal control and responsiveness.
Package Contents
Please verify that all items listed below are included in your package:
- MK x WLMOUSE Beast X Max Wireless 8K Mouse
- USB-C cable
- 8K dongle
- User manual (this document)
- PTFE skates (replacement set)
- Mouse grip tape
- Carrying case
Image: The MK x WLMOUSE Beast X Max Wireless 8K Mouse, showcasing its lightweight, perforated magnesium alloy shell in black.
Setup Guide
1. Charging the Mouse
Before first use, ensure the mouse is fully charged. Connect the provided USB-C cable to the mouse's charging port and the other end to a USB power source (e.g., computer USB port, wall adapter). The LED indicator on the mouse will show charging status.
2. Connecting the 8K Dongle
For optimal wireless performance, use the included 8K dongle. Plug the 8K dongle into an available USB port on your computer. The mouse will automatically attempt to pair with the dongle. Ensure the mouse is powered on.
3. Software Installation (Optional)
For advanced customization, including polling rate adjustment, button remapping, and macro settings, download the official MK x WLMOUSE software from the manufacturer's website. Refer to the software's documentation for detailed instructions.
Operating Instructions
Power On/Off
Locate the power switch on the underside of the mouse. Slide it to the "ON" position to power on the device. Slide it to "OFF" when not in use to conserve battery life.
DPI Adjustment
The mouse features a PAW3950 HS sensor, allowing for precise tracking. DPI (Dots Per Inch) settings can be adjusted via the dedicated DPI button (if present) or through the official software. Refer to the software for specific DPI levels and profiles.
Polling Rate Adjustment
The polling rate can be adjusted from 125 Hz to 8,000 Hz. This setting controls how frequently the mouse reports its position to the computer. Higher polling rates provide smoother and more responsive tracking, which can be beneficial for competitive gaming. Adjust this setting using the official software.
Button Functionality
- Left/Right Click: Standard mouse buttons.
- Scroll Wheel: For vertical scrolling. The TTC Dust Proof Silver encoder switch ensures smooth and durable scrolling.
- Side Buttons: The side buttons utilize OM Blue Dots switches for tactile feedback. These can be programmed via the software for various functions.
- DPI Button: (If present) Cycles through preset DPI levels.
Image: A close-up side view of the mouse, highlighting the side buttons and the intricate magnesium alloy frame.
Maintenance
Cleaning
To maintain optimal performance and appearance, regularly clean your mouse. Use a soft, dry cloth to wipe down the surface. For dust accumulation in the perforated areas, use compressed air. Avoid using harsh chemicals or abrasive materials.
PTFE Skates Replacement
The mouse comes with durable PTFE skates for smooth gliding. If the skates show signs of wear, they can be replaced using the included spare set. Carefully peel off the old skates and apply the new ones, ensuring they are firmly pressed into place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Low battery; Dongle not connected; Mouse not powered on; Driver issue. | Charge the mouse; Ensure dongle is securely plugged in; Turn on the mouse; Reinstall mouse drivers or software. |
| Intermittent connection | Interference; Dongle too far from mouse; Low battery. | Move dongle closer to mouse; Reduce wireless interference (e.g., move away from other wireless devices); Charge the mouse. |
| Cursor erratic or not tracking | Dirty sensor; Unsuitable mouse pad surface. | Clean the optical sensor on the underside of the mouse; Use a clean, uniform mouse pad. |
| Buttons not responding | Software conflict; Physical damage. | Restart computer; Check software settings; Contact support if physical damage is suspected. |
Specifications
| Feature | Detail |
|---|---|
| Brand | MK |
| Model | Beast X Max (OM Opticals) |
| Microcontroller Unit | Nordic 52840 |
| Receiver | Nordic 52820 |
| Polling Rate | Adjustable from 125 Hz to 8,000 Hz |
| Sensor | PAW3950 HS |
| Encoder Switch | TTC Dust Proof Silver |
| Side Button Switches | OM Blue Dots |
| Frame Material | Magnesium alloy with ABS plastic bottom |
| Battery Capacity | 300 mAh |
| Connectivity | Bluetooth, USB (Wireless with 8K dongle) |
| Color | Black |
| Manufacturer | WLMOUSE |
| Country of Origin | China |
Warranty and Support
For warranty information, technical support, or to purchase replacement parts, please visit the official MK store or contact their customer service. Keep your proof of purchase for warranty claims.
Official MK Store: Visit the MK Store on Amazon