Introduction
The M-D Building Products 91810 Soundproof Weather Stripping Door Seal is designed to improve the energy efficiency and comfort of your home by sealing gaps around doors. This product is made from durable vinyl-coated foam and is engineered for easy installation into door kerf/channels, providing protection against drafts, dust, moisture, and noise.
Setup and Installation
This weather stripping is designed for hassle-free installation, suitable for both DIY enthusiasts and professionals. It requires no special tools beyond a tape measure and scissors.
Image Description: A step-by-step installation guide for the M-D Building Products 91810 door seal. The steps are: 1. Measure top & sides of the door, 2. Cut to size, 3. Insert PVC flange into kerf/channel of the door. A hand is shown inserting the black weather stripping into a door frame. Tools needed are a tape measure and scissors, with an estimated completion time of under 10 minutes.
- Measure: Accurately measure the top and sides of your door frame where the existing weather stripping is or where it will be installed.
- Cut to Size: Using scissors, cut the weather stripping to the measured lengths.
- Insert: Firmly press the rigid vinyl spline (flange) of the weather stripping into the kerf/channel located in the door stop. Ensure a snug and secure fit along the entire length.
Image Description: A diagram illustrating the easy installation process of the M-D Building Products 91810 door seal. The weather stripping is shown being pressed into the kerf/channel of a door stop. An arrow indicates how the seal compresses between the door and frame to effectively seal gaps up to 1/2 inch.
The design allows for compression between the door and frame, effectively sealing gaps up to 1/2 inch.
Image Description: A detailed diagram of the M-D Building Products 91810 door seal, highlighting its dimensions (1-1/8 inches or 2.9 cm in height, and 1/2 inch or 1.3 cm in width). The image also shows a cross-section of the seal, explaining how the rigid vinyl spline inserts into the kerf/channel in the door stop, and how the vinyl-coated foam seals gaps up to 1/2 inch. The product is available in a 40-foot length.
Operating Principles and Benefits
The M-D Building Products 91810 door seal functions by creating a tight barrier between your door and its frame, leveraging its material properties and design.
- Flexible Durability: Crafted from vinyl-coated foam, this material ensures durability, weather resistance, and adaptability to door contours, optimizing sealing performance for long-term use in diverse conditions.
- Efficient Gap Sealing: Effectively seals gaps up to 1/2 inch, offering comprehensive protection against drafts, dust, air leakage, and noise intrusion, ensuring a tranquil and comfortable indoor environment with minimal energy loss.
- Efficient Energy Conservation: Contributes to maintaining optimal indoor temperatures by effectively preventing heat or air conditioning loss, thereby enhancing overall energy efficiency and potentially reducing utility costs.
- Enhanced Comfort: Minimizes drafts, noise intrusion, and external elements, ensuring a consistently comfortable living environment and promoting a peaceful and enjoyable atmosphere indoors.
Image Description: A close-up view of the M-D Building Products 91810 door seal, detailing its construction. It features a smooth vinyl coating, an extended PVC flange for insertion, and an impact-resistant foam sponge core. The smooth vinyl coating is designed to minimize friction during door operation. A note clarifies that any creasing from packaging does not affect product performance.
Image Description: This image illustrates the protective capabilities of high-density closed foam seals. It features icons and text indicating that the seals protect against moisture, drafts, pests, and dust. The background shows a comfortable indoor setting with a family, contrasting with an outdoor scene, emphasizing the benefits of a sealed environment.
Image Description: An image highlighting the energy conservation benefits of weatherstripping. It shows a piggy bank containing rolled-up dollar bills, with text stating that weatherstripping can contribute to significant savings on home energy costs and a reduction in CO2 emissions. A disclaimer notes that actual savings may vary based on individual factors and regional conditions, referencing Energy Star recommendations.
Maintenance
The M-D Building Products 91810 weather stripping requires minimal maintenance to ensure continued performance.
- Cleaning: Periodically wipe the visible surfaces of the weather stripping with a damp cloth to remove dust and debris. Avoid harsh chemicals that could degrade the vinyl coating.
- Inspection: Annually inspect the weather stripping for signs of wear, cracking, or detachment from the door frame. If significant damage is observed, replacement may be necessary to maintain optimal sealing performance.
Troubleshooting
If you encounter issues with your weather stripping, consider the following common solutions:
- Seal Not Effective: Ensure the weather stripping is fully seated in the kerf/channel. If gaps persist, verify that the correct size of weather stripping was installed for your door's gap. The product is designed for gaps up to 1/2 inch.
- Difficulty Installing: If the weather stripping is hard to push into the channel, ensure the channel is clean and free of old adhesive or debris. A small amount of silicone lubricant can sometimes aid insertion, but ensure it does not compromise the seal.
- Product Appears Creased: As noted by the manufacturer, the product may appear creased when removed from its packaging. This typically does not affect its performance once installed and allowed to settle.
- Premature Wear: Ensure the door operates smoothly and does not drag or rub excessively against the weather stripping, which can cause premature wear. Adjust door hinges or strike plates if necessary.
Specifications
| Feature | Detail |
|---|---|
| Brand | M-D Building Products |
| Model Number | 91810 |
| Material | Vinyl-coated Foam |
| Color | Black |
| Product Dimensions | 40 feet (Length) x 1.13 inches (Width) |
| Gap Coverage | Up to 1/2 inch |
| UPC | 043374918106 |
| Included Components | 1 Roll of Door Seal |
Warranty Information
Specific warranty details for the M-D Building Products 91810 Soundproof Weather Stripping Door Seal are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact M-D Building Products directly through their official website or customer service channels.
Customer Support
For further assistance, technical support, or inquiries about the M-D Building Products 91810 Soundproof Weather Stripping Door Seal, please contact the manufacturer:
- Manufacturer: M-D Building Products
- Website: Visit the official M-D Building Products website for contact information and additional resources.
- Online Resources: Check for FAQs or support sections on the manufacturer's website.
