TOVEN-RV WH11X29539
WH11X29539 Washer Drain Pump and Filter Assembly User Manual
Model: WH11X29539 | Brand: TOVEN-RV
1. Product Overview
The WH11X29539 Washer Drain Pump and Filter Assembly is a crucial component designed to efficiently remove water from your washing machine during the drain cycle. This replacement part addresses common issues such as noisy cycles, improper draining, leaks, and situations where the washer pumps but does not spin. It is compatible with various GE front-load washing machine models.
Image: The WH11X29539 Washer Drain Pump and Filter Assembly, showing its main components.
2. Installation Guide
Installing the WH11X29539 drain pump and filter assembly is a straightforward process. No specialized tools or extra wiring are typically required. Always ensure the washing machine is disconnected from power before beginning any installation or repair work. It is recommended to wear protective gloves.
Installation Steps:
- Disconnect Power: Unplug the washing machine from the electrical outlet to prevent electric shock.
- Access the Pump: Unscrew the panel and remove the washing machine panel to gain access to the drain pump assembly.
- Remove Hoses: Use an appropriate tool to remove the hose clamp and detach the hoses connected to the old drain pump.
- Remove Old Pump: Unscrew the fasteners that secure the bottom of the pump and unplug any electrical connectors. Carefully remove the old water pump.
- Install New Pump: Position the new WH11X29539 drain pump assembly, secure it with screws, reattach the hoses with clamps, and connect the electrical wiring.
- Reassemble: Replace the washing machine panel and secure it.
- Test: Reconnect the washing machine to the power supply and run a test cycle to ensure proper drainage.
Image: Visual guide illustrating the four main steps for replacing the drain pump: unscrewing the panel, removing the hose, unscrewing the pump, and powering off.
Important Note: Always disconnect the washing machine from the power supply before installation. It is suggested to wear gloves to protect your hands during the process.
3. Operation and Function
The WH11X29539 Washer Drain Pump and Filter Assembly operates automatically as part of your washing machine's cycle. Its primary function is to pump out the water from the wash tub during the drain phase, ensuring that clothes are properly rinsed and prepared for the spin cycle. The integrated filter prevents lint and small debris from entering and clogging the pump mechanism.
Image: A visual representation of the drain pump's role in a household laundry setting, emphasizing its function in a washing machine.
4. Maintenance
Regular maintenance of the drain pump's filter is essential to ensure optimal performance and longevity of your washing machine. A clogged filter can lead to draining issues and reduced efficiency.
Cleaning the Drain Pump Filter:
- Power Off: Always disconnect the washing machine from the power supply before attempting to clean the filter.
- Locate Filter: The drain pump filter is typically located at the bottom front of the washing machine, often behind a small access panel.
- Drain Residual Water: Place a shallow pan or towels beneath the filter cap to catch any residual water that may drain out.
- Remove Filter: Unscrew or unclip the filter cap and carefully pull out the filter.
- Clean Filter: Remove any lint, debris, coins, or foreign objects from the filter under running water. Use a small brush if necessary.
- Inspect and Reinstall: Inspect the filter and its housing for any damage. Reinsert the clean filter and securely close the cap.
Image: Detailed view of the drain pump's internal components, including the leakproof gasket and rust-resistant plastic housing, highlighting areas that benefit from maintenance.
5. Troubleshooting Common Issues
If your washing machine is experiencing issues related to draining, the WH11X29539 drain pump assembly may be the cause. Here are common problems and potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cycle is noisy | Debris in pump, worn pump bearings. | Inspect and clean the drain pump filter. If noise persists, the pump may need replacement. |
| Washing machine is not draining | Clogged filter, kinked drain hose, faulty pump. | Clean the drain pump filter. Check the drain hose for kinks or blockages. If these are clear, the pump may be defective and require replacement. |
| Washer Leaking | Loose hose connections, cracked pump housing, damaged gasket. | Ensure all hose connections are tight. Inspect the pump housing and gaskets for cracks or damage. Replace the pump assembly if damage is found. |
| Not cleaning properly | Poor drainage affecting rinse cycle. | Address any draining issues by cleaning the filter or replacing the pump if necessary. |
| Washer pumps but not spin | This issue is typically not directly related to the drain pump itself, but rather the washer's control board or motor. | Consult your washing machine's specific user manual or a qualified technician for diagnosis. |
Image: Visual representation of common washing machine problems that can be resolved by replacing the drain pump, such as water leakage and improper drainage.
6. Product Specifications
| Specification | Detail |
|---|---|
| Model Number | WH11X29539 |
| Brand | TOVEN-RV |
| Part Number | 80009849 |
| Voltage | 120V |
| Frequency | 60 Hz |
| Current | 1.2A |
| Material | Plastic |
| Color | White |
| Item Weight | 1.98 pounds |
| Package Dimensions | 8.35 x 7.44 x 4.29 inches |
| UPC | 708686943740 |
| Compatible Models | GFW510SCN0WW, GFW510SCN1WW, GFW510SCN2WW, GFW510SCN3WW, GFW510SCN4WW, GFW550SPN0DG, GFW550SPN1DG, GFW550SPR0RS, GFW550SPR3RS, GFW550SSN0WW, GFW550SSN1WW, GFW550SSN3WW, GFW650SPN0SN, GFW650SPN1SN, GFW650SPN2SN, GFW650SPN3SN, GFW650SPN4SN, GFW650SSN0WW, GFW650SSN1WW, GFW650SSN2WW, etc. |
| Replaces Part Numbers | AP6986715, 4962370, PS16217203, EAP16217203, B25-3A04 PD00065822 |
Image: A visual display of the electrical specifications (120V, 60Hz, 1.2A) and compatible part numbers for the WH11X29539 drain pump.
7. Warranty and Support
The TOVEN-RV WH11X29539 Washer Drain Pump and Filter Assembly comes with a 1-Year Warranty. This warranty covers defects in materials and workmanship under normal use.
Customer Support:
If you have any questions regarding the product, installation, troubleshooting, or warranty claims, please do not hesitate to contact TOVEN-RV customer service. They are available to assist with refunds or replacements as needed.
- Contact Information: Please refer to the seller's contact details on the platform where the product was purchased, or visit the official TOVEN-RV brand store for support options.
- Online Resources: For additional support and information, you may visit the TOVEN-RV Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.