INSTREE CHRISTMAS G1002A

INSTREE CHRISTMAS 7.5FT Pre-lit Pencil Christmas Tree Spruce Instruction Manual

Model: G1002A

Brand: INSTREE CHRISTMAS

Introduction

Thank you for choosing the INSTREE CHRISTMAS 7.5FT Pre-lit Pencil Christmas Tree Spruce. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new Christmas tree. Please read all instructions carefully before assembly and retain this manual for future reference.

Important Safety Instructions

  • Read and follow all instructions carefully.
  • Do not overload electrical outlets.
  • Ensure the tree is placed on a stable, level surface to prevent tipping.
  • Keep away from heat sources, open flames, and flammable materials.
  • Unplug the tree from the power source when leaving the house, going to bed, or when not in use for extended periods.
  • Do not allow children or pets to play with the tree or its electrical components.
  • The remote control requires 2 AAA batteries (not included). Ensure correct polarity when inserting batteries.
  • This product is for indoor use only.

Package Contents

Verify that all components are present before beginning assembly:

  • Tree Sections (A, B, C, D - quantity may vary by height, but typically 3-4 sections for 7.5ft tree)
  • Tree Stand
  • Remote Control (requires 2 AAA batteries, not included)
  • Fluffing Gloves (optional, for comfort during branch shaping)
  • Storage Bag

Setup Instructions

  1. Assemble the Tree Stand: Place the tree stand on a flat, stable surface. Open the legs of the stand to form an 'X' shape and secure them with the provided screws or locking mechanism.
  2. Insert Bottom Tree Section: Carefully insert the bottom section of the tree (usually marked 'D' or the largest section) into the assembled tree stand. Tighten the thumbscrew on the stand to secure the trunk.
  3. Connect Middle Tree Sections: Continue by inserting the next tree section (e.g., 'C', then 'B') into the section below it. Ensure the electrical connections between sections are securely plugged in. The hinged branches will fall into place.
  4. Attach Top Tree Section: Place the top section of the tree (usually marked 'A' or the smallest section) onto the last middle section. Connect any remaining electrical plugs.
  5. Shape the Branches (Fluffing): Starting from the bottom, gently pull apart and spread out each branch tip, working your way up the tree. This process, known as "fluffing," helps to create a full and realistic appearance. Allow 10-25 minutes for thorough fluffing. Use the provided fluffing gloves to protect your hands.
  6. Connect to Power: Plug the tree's power cord into a suitable electrical outlet.
Fully assembled 7.5ft pre-lit pencil Christmas tree with multi-color LED lights and remote control.

Image: A fully assembled 7.5ft pre-lit pencil Christmas tree with multi-color LED lights, showcasing its slim profile and the remote control in the foreground. This image illustrates the tree's appearance after complete setup and fluffing.

Fully assembled 7.5ft pre-lit pencil Christmas tree with warm white LED lights.

Image: A fully assembled 7.5ft pre-lit pencil Christmas tree illuminated with warm white LED lights, demonstrating its elegant glow in a home setting.

Operating Instructions

Your INSTREE CHRISTMAS tree features dual-color LED lights and is controlled by a remote. The remote control requires 2 AAA batteries (not included).

Remote Control Functions:

Diagram of the remote control for the Christmas tree lights, showing buttons for On/Off, Mode, Brightness, Timer, and Speed.

Image: A detailed diagram of the remote control, highlighting buttons for power (On/Off), light mode selection, brightness adjustment, timer settings, and speed control for flashing modes. The remote operates on 2 AAA batteries, which are not included.

  • ON/OFF: Press the green "ON" button to turn the lights on, and the red "OFF" button to turn them off.
  • MODE: Use the "MODE" buttons (up/down arrows or central mode button) to cycle through 16 different lighting modes, including:
    • Warm White (classic steady glow)
    • Traditional Multi-Color (red, yellow, green, blue, purple)
    • Pastel Multi-Color (petal, blond, orange, mint, lavender)
    • Combination modes (steady, twinkle, slow glow, etc.)
  • BRIGHTNESS: Adjust the light intensity using the brightness buttons (sun icon with +/-). There are 5 brightness levels.
  • TIMER: Set the timer function using the "TIMER/OFF" button. There are 23 timer types available.
  • SPEED: For flashing or dynamic light modes, use the "SPEED" buttons (+/-) to adjust the speed of the light effects.
  • Memory Function: The tree's lighting system includes a memory function that recalls the last selected lighting mode when powered on.
Close-up of warm white LED lights on the Christmas tree branches.

Image: A close-up view of the tree branches illuminated with warm white LED lights, demonstrating the clear and bright light output.

Close-up of multi-color LED lights on the Christmas tree branches.

Image: A close-up view of the tree branches illuminated with multi-color LED lights, showcasing the vibrant red, yellow, green, blue, and purple hues.

Maintenance

  • Cleaning: To clean the tree, gently wipe the branches with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Light Bulb Replacement: The tree is designed to stay lit even if one bulb burns out. If multiple bulbs in a section fail, check connections. Individual LED bulbs are generally not user-replaceable.
  • Storage: Before storing, ensure the tree is completely unplugged and dry. Compress the branches and disassemble the tree into its original sections. Store in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Lights do not turn on.Power cord not plugged in; loose section connection; remote batteries dead.Ensure power cord is securely plugged into a working outlet. Check all section-to-section electrical connections. Replace remote control batteries (2 AAA).
Some sections of lights are out.Loose connection between tree sections.Verify that all tree sections are securely connected, including their electrical plugs.
Remote control is not working.Dead batteries; remote out of range; obstruction.Replace batteries (2 AAA). Ensure you are within close range of the tree and there are no obstructions between the remote and the tree's receiver.
Tree appears sparse or not full.Branches not properly fluffed.Spend additional time fluffing and shaping each individual branch tip to achieve a fuller appearance.

Specifications

  • Model: G1002A
  • Height: 7.5 feet (90 inches)
  • Base Diameter: 28 inches
  • Material: Polyvinyl Chloride (PVC)
  • Lights: 350 UL listed Dual Color LED Lights (Warm White & Multi-Color)
  • Light Modes: 16 (including steady, twinkle, slow glow, combination)
  • Brightness Levels: 5
  • Timer Types: 23
  • Control: Remote Control (requires 2 AAA batteries, not included) & Foot Pedal
  • Weight: Approximately 20 lbs
  • Manufacturer: GAZE ART LIGHTING CO LTD

Warranty Information

Specific warranty details are not provided in the product description. Please refer to the product packaging or contact INSTREE CHRISTMAS customer support for detailed warranty information.

Customer Support

For any questions, assistance, or troubleshooting not covered in this manual, please contact INSTREE CHRISTMAS customer support. Visit the official INSTREE CHRISTMAS store on Amazon for more information: INSTREE CHRISTMAS Store.

© 2025 INSTREE CHRISTMAS. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.