Bear JSQ-F60J7 6L Air Humidifier User Manual

1. Introduction

Thank you for choosing the Bear JSQ-F60J7 6L Air Humidifier. This ultrasonic cool mist humidifier is designed to improve air quality and comfort in your home or office. With its large 6-liter capacity, constant humidity function, timer, sleep mode, and aroma diffusion capabilities, it provides a quiet and efficient solution for maintaining optimal humidity levels. Please read this manual thoroughly before use to ensure proper operation, maintenance, and safety.

2. Important Safety Instructions

To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions:

• Read all instructions before using the appliance.
• Always place the humidifier on a firm, flat, waterproof surface at least 12 inches (30 cm) away from walls and appliances.
• Do not place the humidifier directly on carpet, towels, or other absorbent surfaces.
• Keep the humidifier out of reach of children and pets.
• Do not immerse the base unit in water or other liquids.
• Unplug the humidifier from the power outlet before filling, cleaning, or moving it.
• Do not add essential oils directly into the water tank. Use the designated aroma pad/box only.
• Use only clean, cool tap water. Distilled or demineralized water is recommended to prevent white dust.
• Do not block the mist outlet or air intake vents.
• If the humidifier emits an unusual odor or sound, discontinue use immediately and unplug it.

3. Product Components

Familiarize yourself with the parts of your Bear JSQ-F60J7 humidifier:

• Mist Nozzle: 360° rotatable dual nozzle for mist direction.
• Water Tank: 6-liter capacity for extended operation.
• Base Unit: Contains the ultrasonic transducer, fan, and control panel.
• Control Panel/Digital Display: For setting functions and viewing status.
• Aroma Box/Pad: For essential oil diffusion.
• Power Cord: For electrical connection.
• Pre-filter: Included component for air purification.

Image 1: Bear JSQ-F60J7 6L Air Humidifier. This image shows the complete humidifier unit with its water tank and mist nozzle.

4. Setup

1. Unpack: Carefully remove the humidifier from its packaging. Retain packaging for future storage or transport.
2. Placement: Place the humidifier on a flat, stable, and waterproof surface. Ensure it is at least 30 cm (12 inches) away from walls, furniture, and electronic devices.
3. Fill Water Tank:
   • Remove the water tank from the base.
   • Unscrew the tank cap and fill the tank with clean, cool tap water. Do not fill past the MAX line.
   • Screw the tank cap back on tightly.
   • Place the filled water tank back onto the base unit, ensuring it is seated correctly.
4. Connect Power: Plug the power cord into a suitable electrical outlet (220 Volts). The unit will beep, and the digital display will light up.

5. Operating Instructions

The Bear JSQ-F60J7 humidifier features a digital display and touch controls for easy operation.

• Power On/Off: Press the Power button to turn the humidifier on or off. The display will show the current humidity level when on.
• Mist Output Adjustment: Rotate the 360° dual nozzle to direct the mist as desired. The mist output level can typically be adjusted via the control panel (refer to specific icons on your unit).
• Constant Humidity Setting: Press the Humidity button to cycle through desired humidity levels (50-55-60-65-70-75-80% RH). The humidifier will automatically maintain the selected humidity. If the room humidity drops more than 5% below the set level, the unit will resume operation.
• Timer Function: Press the Timer button to set the operating time from 1 to 12 hours. The humidifier will automatically turn off once the set time expires.
• Sleep Mode: Press the Sleep Mode button to activate. In this mode, the digital display will turn off, and the mist output will be regulated to a minimum speed to ensure quiet operation and prevent excessive humidity build-up during the night.
• Aroma Function: Locate the aroma box/pad, usually a small tray or compartment on the side or back of the base unit. Add 2 to 6 drops of essential oil onto the aroma pad. Do not add essential oils directly into the water tank. The fan will diffuse the fragrance into the air along with the mist.

6. Maintenance and Cleaning

Regular cleaning is essential for optimal performance and hygiene. The humidifier features a cleaning reminder function.

Daily Maintenance:

• Unplug the unit.
• Empty any remaining water from the tank and base.
• Rinse the water tank and base with fresh water.
• Wipe all surfaces dry with a clean cloth.

Weekly Cleaning:

• Descaling the Water Tank and Base:
  • Unplug the humidifier.
  • Pour 2-4 tablespoons of white vinegar into the water tank and base.
  • Let it soak for 20-30 minutes.
  • Use a soft brush or cloth to clean mineral deposits.
  • Rinse thoroughly with clean water until the vinegar smell is gone.
• Cleaning the Transducer (Mist Maker): Gently wipe the transducer with a soft cloth or cotton swab dipped in white vinegar to remove mineral buildup. Do not scrape or use abrasive tools.
• Aroma Pad: Replace the aroma pad regularly or clean it with mild soap and water if reusable.

Storage:

When not in use for an extended period, clean the humidifier thoroughly, ensure all parts are dry, and store it in a cool, dry place.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or contact the retailer. Keep your proof of purchase for any warranty claims.