Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LamQee 23.6 Inch Modern Outdoor LED Wall Light. Please read this manual thoroughly before installation and retain it for future reference.
Key Features:
- Sleek linear frame with a matte black metal finish for a modern aesthetic.
- Integrated 3000K warm white LED light source for soft, elegant illumination.
- Suitable for both outdoor and indoor use, including porches, garages, patios, hallways, and bedrooms.
- IP65 waterproof rating ensures durability in various weather conditions.
- Dimmable functionality (dimmer not included) for adjustable brightness.
- Long lifespan of approximately 40,000 hours.
What's in the Box
Verify that all components are present before beginning installation:
- LED Wall Light Fixture
- Mounting Hardware Kit
- Instructions Manual

Image: Overview of the LamQee LED Outdoor Wall Light highlighting its IP65 waterproof rating, LED energy saving, 3000K warm white light, 30,000-50,000 hours lifespan, 24W, 900lm, 110V, and dimmer compatibility.
Setup Instructions
Safety Precautions:
- WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation.
- Consult a qualified electrician if you are not familiar with electrical wiring.
- Wear safety glasses and gloves during installation.
Tools Required:
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Electrical Tape
- Drill (if mounting holes are not pre-existing)
- Level
Installation Steps:
- Turn Off Power: Locate the circuit breaker controlling the light fixture's location and turn off the power.
- Prepare Mounting Surface: Ensure the mounting surface is clean, dry, and structurally sound.
- Attach Mounting Bracket: Secure the mounting bracket to the junction box using the provided screws. Ensure the bracket is level.
- Wire Connections: Connect the fixture's wires to your household wiring. Match black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Use wire nuts to secure connections and electrical tape for added insulation.
- Mount Fixture: Carefully align the fixture with the mounting bracket and secure it with the provided screws. Ensure a tight fit to prevent moisture entry.
- Seal (Outdoor Use): For outdoor installations, apply silicone sealant around the edges of the fixture where it meets the wall to prevent water intrusion.
- Restore Power: Turn the power back on at the circuit breaker and test the light fixture.
For a visual guide, please refer to the official installation video below:
Video: Official LamQee installation guide for the modern exterior lighting fixtures, demonstrating the setup process.

Image: Technical drawing showing the dimensions of the 23.6-inch wall light: 23.6 inches in height, 5.5 inches in width, and 3 inches in depth.
Operating Instructions
The LamQee LED Wall Light operates via a standard wall switch. Ensure the power is connected and the switch is in the 'ON' position for illumination.
Dimming Functionality:
This fixture is compatible with most standard LED dimmers (not included). If you wish to adjust the brightness, install a compatible dimmer switch according to its manufacturer's instructions. The light will then respond to the dimmer's controls.

Image: Comparison showing the wall light in three states: turned off, daytime lighting (subtle glow), and night lighting (full warm illumination).
Maintenance
Regular maintenance ensures optimal performance and longevity of your LamQee LED Wall Light.
Cleaning:
- Before cleaning, ensure the power to the fixture is turned off at the circuit breaker.
- Wipe the fixture with a soft, damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- For the frosted glass shade, use a mild glass cleaner if necessary, applied to a cloth, not directly to the fixture.
Inspection:
- Periodically inspect the fixture for any signs of damage, loose wiring, or wear.
- Ensure the silicone sealant (if applied) around outdoor fixtures remains intact to maintain water resistance. Reapply if cracks or gaps appear.
- The integrated LED is designed for long-term use and is not user-replaceable.
Troubleshooting
If you encounter issues with your LamQee LED Wall Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connections. Faulty wall switch. | Check circuit breaker. Verify wire connections are secure (power off). Test or replace wall switch. |
| Light flickers or dims unexpectedly. | Incompatible dimmer switch. Loose wiring. Voltage fluctuations. | Ensure dimmer is LED compatible. Check wire connections (power off). Consult an electrician for voltage issues. |
| Water inside the fixture (outdoor). | Improper sealing during installation. | Turn off power, dry fixture, and reapply silicone sealant around the base. |
If these steps do not resolve the issue, please contact LamQee customer service for further assistance.
Specifications
- Brand: LamQee
- Model Name: 06FTL0277
- Color: Black
- Material: Metal
- Style: Modern
- Light Fixture Form: Wall
- Product Dimensions: 5.5"L x 3"W x 23.6"H
- Indoor/Outdoor Usage: Both (IP65 rated for outdoor durability)
- Power Source: AC
- Installation Type: Wall mount
- Light Source Type: Integrated LED
- Finish Type: Powder Coated
- Shade Material: Frosted Glass
- Number of Light Sources: 1
- Voltage: 110 Volts
- Light Color: Warm white
- Color Temperature: 3000 Kelvin
- Wattage: 24 watts
- Brightness: 2400 Lumens
- Efficiency: 100 lumens per watt
- Water Resistance Level: IP65 Waterproof
- Average Life: 40,000 Hours
- Special Features: Dimmable (dimmer not included), Energy-saving LED
Warranty and Support
LamQee is committed to providing excellent, practical, and artistic lighting fixtures. For any questions or concerns regarding your product, please contact LamQee customer service directly. We aim to provide professional and effective solutions.
Please refer to your purchase documentation for specific warranty details and return policies. Protection plans may be available for extended coverage.