Introduction
Thank you for choosing the Yaheetech 7.5ft Premium Snow Flocked Artificial Christmas Tree. This manual provides detailed instructions for the safe and proper assembly, operation, and maintenance of your new artificial Christmas tree. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: The Yaheetech 7.5ft Premium Snow Flocked Artificial Christmas Tree, featuring a blue gradient and white flocking.
Safety Information
- This product is intended for indoor use only.
- Keep the tree away from open flames, heat sources, and direct sunlight to prevent damage and discoloration.
- Ensure the tree is assembled on a flat, stable surface to prevent tipping.
- Do not overload branches with heavy ornaments, which could cause damage or instability.
- Inspect all parts for damage before assembly. Do not use if any parts are broken or missing.
- Keep small children and pets away from the tree during assembly and ensure all small parts are out of their reach.
Package Contents
Before beginning assembly, please verify that all components listed below are present in your package:
- Tree Section A (Bottom)
- Tree Section B (Middle)
- Tree Section C (Top)
- Metal Stand
- Protective Caps for Stand Legs
Setup Instructions
Follow these steps to assemble your artificial Christmas tree:
- Assemble the Metal Stand: Unfold the metal stand and insert the protective caps onto the ends of the stand legs. Ensure the stand is stable and secure.
- Insert Tree Section A: Remove the protective cover from the bottom pole of Tree Section A. Insert Tree Section A into the assembled metal stand. Tighten the screws on the stand to secure the tree section.
- Insert Tree Section B: Carefully insert Tree Section B into the top of Tree Section A.
- Insert Tree Section C: Insert Tree Section C (the top section) into the top of Tree Section B.
- Fluff the Branches: Starting from the bottom section and working your way up, gently separate and spread out each branch and individual tip. Adjust them to a 45-60 degree angle to create a full and natural appearance. This process is crucial for the tree's final look and may take 1.5 to 2 hours for a 7.5ft tree.
Image: Diagram illustrating the three main sections of the tree (A, B, C) and how they connect to the base for easy assembly.
Image: A visual guide demonstrating the process of assembling the tree sections and manually fluffing the branches for optimal fullness.
Image: A side-by-side comparison showing the tree before and after proper fluffing, highlighting the significant difference in fullness and appearance. Text indicates that fluffing a 7.5ft tree typically takes 1.5 to 2 hours.
Tip: To keep your floor clean from any minor debris or flocking that may shed during installation, consider laying the accompanying brown paper or a protective sheet under the tree during assembly.
Image: The tree stand positioned on a brown paper sheet, demonstrating a method to protect flooring from any flocking or debris during setup.
Operating (Fluffing and Decorating)
Fluffing for Optimal Appearance
The key to achieving a full and realistic look for your artificial tree is thorough fluffing. Each branch is hinged and designed to be spread out. Work from the inside out, separating each small tip to fill any gaps. This process enhances the tree's density and overall aesthetic.
Decorating Tips
Once fully fluffed, your tree is ready for decoration. Distribute ornaments evenly across the branches, placing larger items closer to the trunk for depth and smaller items towards the tips. Consider adding lights before ornaments for easier placement.
Maintenance
Cleaning
To clean your artificial Christmas tree, gently dust the branches with a soft cloth or a feather duster. For more stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture, especially on flocked areas. Do not use harsh chemicals or abrasive cleaners.
Storage
At the end of the season, carefully remove all decorations. Disassemble the tree by reversing the assembly steps. Compress the branches as much as possible without causing damage. Store the tree sections and stand in their original packaging or a dedicated tree storage bag in a cool, dry place away from direct sunlight and extreme temperatures. This helps preserve the flocking and branch integrity for future use.
Troubleshooting
- Tree does not look full: This is typically resolved by thorough fluffing. Ensure each branch and tip is spread out and adjusted. Refer to the fluffing instructions in the Setup section.
- Flocking is shedding: Some shedding of flocking is normal during initial setup and handling. This should decrease significantly once the tree is assembled and settled.
- Tree is unstable: Verify that the metal stand is fully unfolded and that the screws securing the bottom tree section are tightened. Ensure the tree is placed on a level surface.
Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Product Dimensions | 55"D x 55"W x 90"H (7.5ft Height) |
| Color | Blue Gradient & White |
| Item Weight | 31.7 Pounds |
| Special Feature | Bendable Branch, Flocked |
| Tree Type | Fir (Artificial) |
| Base Type | Metal Stand |
| Built-in Light | No |
| Tip Count | 1284 |
| Assembly Required | Yes |
Image: A diagram illustrating the dimensions of the 7.5ft tree, showing a height of 90 inches and a base width of 55 inches, with a person for scale.
Warranty and Support
For any questions, concerns, or support regarding your Yaheetech 7.5ft Premium Snow Flocked Artificial Christmas Tree, please contact Yaheetech customer service. While specific warranty details are not provided in this manual, the manufacturer typically offers support for product defects and issues. Please refer to your purchase documentation or the Yaheetech official website for detailed warranty information and contact methods.
You can visit the official Yaheetech store for more information: Yaheetech Store
