1. Product Overview
The ANCEL DS600 Elite is a 2024 advanced full functional car diagnostic scanner based on Android 10. It offers extensive diagnostic capabilities and maintenance functions. The ANCEL VD500 OBD2 scanner is specifically designed for Volkswagen Group vehicles, providing essential diagnostic functions for VW, Audi, Skoda, and Seat models.
Figure 1: ANCEL DS600 Elite and ANCEL VD500 OBD2 Diagnostic Scanners.
2. Key Features
- Advanced Active Test: Perform active tests to pinpoint faulty components.
- ECU/Online Coding: Match ECU replacements, unlock high-level functions, and customize car settings for 98% of vehicles. Supports offline coding.
- 34+ Maintenance Functions: Includes oil reset, TPMS reset, SRS, SAS, ABS, EPB, IMMO, injector coding, AT learning, suspension matching, and more.
- Full Systems Diagnostics: Comprehensive diagnostics on all available modules.
- AutoAuth for FCA SGW: Provides authorization for FCA Secure Gateway.
- V.A.G Guide: Step-by-step guided functions for Volkswagen Group vehicles.
- Wireless Diagnosis: Bluetooth VCI for convenient wireless connection.
- Intelligent VIN Recognition: Automatically identifies vehicle information.
- Extensive Vehicle Coverage: Supports 200,000+ vehicle models.
- 12-in-1 Data Stream: Displays live data in various formats.
- 6 Extension Modules Supported: Enhances diagnostic capabilities.
Figure 2: ANCEL DS600 Elite ECU Coding Capabilities.
Figure 3: Overview of 34+ Maintenance Functions.
Figure 4: OE All-System Diagnostics and Bi-Directional Control.
Figure 5: Extensive Vehicle Coverage and 25 Supported Languages.
3. Setup
The ANCEL DS600 Elite comes with a VCI (Vehicle Communication Interface) dongle for wireless connection to the vehicle's OBD2 port. The ANCEL VD500 is a wired scanner that connects directly to the OBD2 port.
3.1 Connecting the DS600 Elite
- Locate the vehicle's OBD2 port (usually under the dashboard).
- Plug the VCI dongle into the OBD2 port. Ensure a secure connection.
- Power on the DS600 Elite tablet.
- The tablet will automatically connect to the VCI via Bluetooth.
3.2 Connecting the VD500
- Locate the vehicle's OBD2 port.
- Plug the VD500's cable directly into the OBD2 port.
- The VD500 will power on automatically.
Figure 6: ANCEL VD500 connected to vehicle's OBD2 port.
4. Operating Instructions
4.1 Navigating the DS600 Elite Interface
The DS600 Elite features an 8-inch LCD touchscreen with an Android 10 operating system. Navigation is intuitive, similar to a standard tablet device.
- Touchscreen: Tap icons and menus to navigate.
- Physical Buttons: Use the physical buttons on the side for quick navigation (OK, directional arrows, back).
4.2 Automatic VIN Recognition
The DS600 Elite supports intelligent VIN recognition technology. Upon connection, it can automatically identify the vehicle's make, model, and year, streamlining the diagnostic process.
4.3 System Scan / Health Report
Initiate a full system scan to quickly identify any fault codes across all available modules in the vehicle. The health report provides a comprehensive overview of the vehicle's status.
4.4 Live Data Stream
The device can display live data parameters in text, graph, or combined formats. The 12-in-1 data stream allows for detailed monitoring of various sensors and system statuses.
4.5 Actuation Tests (Bi-Directional Control)
The DS600 Elite supports bi-directional control, allowing users to send commands to vehicle systems and receive data back. This helps in actively testing components and pinpointing faults.
4.6 OBD2 Functions (VD500 & DS600 Elite)
Both devices support standard OBD2 functions, including:
- Read and Clear DTCs (Diagnostic Trouble Codes)
- Read Live Data
- Read Freeze Frame Data
- I/M Readiness Status
- O2 Sensor Test
- On-Board Monitor Test
- Component Test
- Vehicle Information (VIN, CID, CVN)
5. Maintenance Functions
The DS600 Elite offers over 34 maintenance functions. The VD500 provides specific maintenance functions for VAG vehicles.
Figure 7: ANCEL VD500 Special Functions for VAG Vehicles.
5.1 ECU/Online Coding
Allows matching of ECU replacements, unlocking high-level functions, and customizing car settings. This includes power balance, PMI (Programmable Module Installation), adaptive data reset, online calibration, online parameterization, and flashing hidden functions.
5.2 ABS Bleeding
If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to restore ABS brake sensitivity.
5.3 Battery Matching (BMS)
Registers new battery parameters to the ECU after battery replacement to ensure proper charging and system function.
5.4 Oil Reset
Resets the oil service light and maintenance mileage after an oil change.
5.5 TPMS Reset
Checks tire sensor IDs from the vehicle ECU and performs TPMS programming and reset after tire or TPMS sensors are replaced.
5.6 SAS Reset (Steering Angle Sensor)
Calibrates the steering angle sensor after replacement or repair to ensure correct steering system operation.
5.7 DPF Regeneration
Used to clear PM from the DPF filter through continuous combustion oxidation mode to stabilize the filter.
5.8 Injector Coding
After the ECU or injector is replaced, the injector code of each cylinder must be confirmed or re-coded.
5.9 Throttle Adaptation
Initializes the throttle actuator to the default state for regulating throttle (or idle) operations accurately.
Video 1: Demonstration of Full ECU-Level Maintenance Resets.
6. Troubleshooting
If you encounter issues with your ANCEL diagnostic tool, consider the following steps:
- Check Connections: Ensure the OBD2 connector/VCI dongle is securely plugged into the vehicle's port.
- Power Supply: Verify the device is sufficiently charged or receiving power from the vehicle.
- Software Updates: Ensure the device software and vehicle-specific applications are up to date.
- Vehicle Compatibility: Confirm your vehicle's make, model, and year are supported for the specific function you are trying to perform.
- One Click Feedback: The DS600 Elite offers a 'Feedback' function to directly send diagnostic logs and problem descriptions to ANCEL's technical support for assistance.
Video 2: Demonstration of One-Click Features, including Feedback.
7. Specifications
- Brand: ANCEL
- Operating System (DS600 Elite): Android 10
- Processor (DS600 Elite): 2 GHz Quad-Core CPU
- Display (DS600 Elite): 8-inch LCD Screen (1280x800 resolution)
- Memory (DS600 Elite): 2GB RAM + 32GB Storage
- Battery (DS600 Elite): 6000 mAh
- Connectivity (DS600 Elite): 2.4GHz & 5GHz Dual-Frequency Wi-Fi, Bluetooth VCI
- Camera (DS600 Elite): 8 Megapixel Rear-Facing
- Supported Languages: 25 languages
- Vehicle Compatibility (VD500): Volkswagen Group (VW/Audi/Skoda/SEAT) 12-volt 16-pin vehicles, other 12-volt OBD II-compliant vehicles (1996 or later)
8. Warranty and Support
The ANCEL DS600 Elite and VD500 come with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your product or contact ANCEL customer support.
8.1 Software Updates
The DS600 Elite includes 2 years of free software updates. These updates are delivered over-the-air via Wi-Fi, ensuring your device always has the latest vehicle data and functionalities.
Video 3: Demonstration of One-Click Free Update process.
8.2 Remote Technical Assistance
The DS600 Elite offers remote technical service, allowing ANCEL's support team to provide instant assistance by remotely accessing your device via TeamViewer. This feature helps in diagnosing and resolving complex issues efficiently.
