YITAHOME MAYIHxH9Xe
YITAHOME Two-Tier Ice Table Instruction Manual
Brand: YITAHOME | Model: MAYIHxH9Xe
Introduction
This instruction manual provides detailed guidance for the setup, operation, and maintenance of your YITAHOME Two-Tier Ice Table. Designed for versatility and durability, this 4-foot folding ice cooler table is suitable for a wide range of indoor and outdoor gatherings, including parties, picnics, camping trips, weddings, and barbecues. Its robust construction and thoughtful features ensure a convenient and enjoyable experience.
Components List
Before beginning assembly, please verify that all the following components are included in your package:
- Folding Table Frame with Integrated Ice Basin
- Upper Shelf
- Bottom Mesh Storage Rack
- Drain Plug and Gasket
- Adjustable Drain Hose
- Detachable Skirt

Figure 1: Overview of YITAHOME Two-Tier Ice Table components.
Setup and Assembly
Follow these steps to correctly set up your ice table:
- Unfold the Table Frame: Carefully unfold the main table frame and extend the legs until they lock securely into place. Ensure all locking mechanisms are engaged for stability.

Figure 2: Unfolding the table frame.
- Install the Drain Assembly: Insert the drain plug and gasket into the drain hole located at the bottom of the ice basin. Secure it by tightening the nut from underneath the table. Attach the adjustable drain hose to the drain outlet.

Figure 3: Drain assembly components.
- Attach the Bottom Storage Rack: Hook the bottom mesh storage rack onto the designated supports on the table legs. This rack provides additional storage for party essentials.

Figure 4: Installing the bottom storage rack.
- Position the Upper Shelf: Place the upper shelf onto the designated supports above the ice basin. This shelf can be used for dry items, food, or additional beverages.

Figure 5: Upper shelf in use.
- Attach the Detachable Skirt (Optional): If desired, attach the detachable skirt around the perimeter of the ice basin. This adds an elegant touch and can conceal items stored on the bottom rack.

Figure 6: Table with detachable skirt.
Video 1: Official YITAHOME video demonstrating the assembly process of the ice cooler table, including unfolding the legs and attaching components.
Operating Instructions
Using the Ice Basin
The 3-inch deep basin is designed to hold ample ice, keeping your beverages and food items cool and fresh for extended periods. Simply fill the basin with ice and arrange your desired items.
Utilizing the Upper Shelf
The upper shelf provides a convenient elevated surface for serving dry snacks, displaying glassware, or holding additional items that do not require chilling.
Drain Functionality
The adjustable bottom drainpipe allows for quick and efficient water drainage after use. Position the hose to direct melted ice water away from your event area.
Portability and Storage
The table's folding design allows for compact storage and easy transport. Simply fold down the legs and detach any accessories for convenient portability using the side handles.

Figure 7: YITAHOME Ice Table in use at an outdoor gathering.
Maintenance
Proper care will ensure the longevity of your YITAHOME Two-Tier Ice Table:
- Cleaning: The high-density polyethylene tabletop and frame can be easily cleaned by wiping with a damp or dry cloth as necessary. For stubborn stains, a mild soap solution can be used.
- Storage: When not in use, fold the table and store it in a dry, protected area to prevent prolonged exposure to extreme weather conditions.
- Weather Resistance: The table is designed to withstand cold, heat, and corrosion. However, prolonged exposure to harsh elements may affect its appearance over time.
- Indoor Use: When using indoors, ensure the protective foot pads are securely attached to the table legs to prevent scratches on flooring surfaces.
Troubleshooting
This section addresses common issues you might encounter:
| Issue | Possible Cause | Solution |
|---|---|---|
| Table feels unstable or wobbly. | Legs not fully extended or locked; uneven surface. | Ensure all legs are fully extended and their locking mechanisms are engaged. Move the table to a flat, even surface. |
| Water leakage from drain. | Drain plug or gasket not properly seated or damaged. | Check that the drain plug and gasket are securely installed and tightened. Inspect the gasket for any damage and replace if necessary. |
| Missing or damaged components upon arrival. | Shipping damage or packaging error. | Immediately contact YITAHOME customer support with your order details for assistance and replacement parts. |
| Scratches on indoor flooring. | Foot pads not used or dislodged. | Always ensure the protective foot pads are securely attached to the table legs when using the table on sensitive indoor surfaces. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | YITAHOME |
| Model Number | MAYIHxH9Xe |
| UPC | 197839461178 |
| Material | High-Density Polyethylene (Tabletop), Resin (Overall) |
| Color | White |
| Product Dimensions (Expanded) | 40.55''L x 22''W x 39.37''H (103cm L x 56cm W x 100cm H) |
| Item Weight | 32.1 lbs (14.56 kg) |
| Tabletop Weight Capacity | Up to 441 lbs (200 kg) |
| Storage Rack Weight Capacity | Up to 50 lbs (22.68 kg) |
| Special Feature | Weather-resistance, Folding Design, Detachable Skirt, Drain System |
Warranty and Support
For detailed warranty information, technical support, or any inquiries regarding your YITAHOME Two-Tier Ice Table, please contact YITAHOME customer support directly through their official website or the retailer from whom you purchased the product. Please have your model number (MAYIHxH9Xe) and purchase date available when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.