Enbrighten Vibe Add-an-Outlet Light Adapter (Model 80753) User Manual

Introduction

This manual provides essential instructions for the installation, operation, and maintenance of your Enbrighten Vibe Add-an-Outlet Light Adapter, Model 80753. This device is designed to expand outdoor electrical capabilities by adding two GFCI outlets and a mounting point for a light fixture or other device to an existing junction box, with integrated Wi-Fi control.

Important Safety Information

WARNING: Risk of Electric Shock. Installation requires working with electrical wiring. If you are not comfortable with electrical work, consult a qualified electrician.

• Always turn off power at the circuit breaker before installation, servicing, or removing the device.
• Ensure all wiring connections are secure and comply with local electrical codes.
• This device is certified for wet locations only when the GFCI cover is closed. For temporary GFCI use only when open.
• Do not exceed the maximum electrical load of 600 watts or 50 lbs for mounted fixtures.
• Use only with 120V AC, 60Hz circuits.
• Do not immerse in water.

Package Contents

• Enbrighten Vibe Add-an-Outlet Light Adapter (Model 80753)
• Mounting Hardware (screws, wire nuts)
• Quick-connect wiring components

Image Description: This image displays the Enbrighten Vibe Add-an-Outlet Adapter from various angles, highlighting its dimensions and the included hardware. The main unit features two GFCI outlets with a safety cover. The image also shows screws, wire nuts, and quick-connect wiring components, illustrating everything necessary for installation.

Product Features

• Dual GFCI Outlets: Provides two Ground Fault Circuit Interrupter (GFCI) protected receptacles for outdoor electronics and lighting.
• Junction Box Adapter: Designed to mount directly to an existing outdoor junction box.
• Fixture Mounting Point: Supports mounting an additional light fixture or device up to 600W and 50 lbs.
• Wi-Fi Control: Independent wireless ON/OFF control of the mounted fixture and the GFCI outlets via the Enbrighten app.
• Smart Home Compatibility: Works with Amazon Alexa and Google Assistant for voice control.
• Weather Resistant: ETL-listed for year-round outdoor use when GFCI cover is closed.

Setup and Installation

1. Pre-Installation

• Ensure power to the junction box is OFF at the circuit breaker before beginning.
• Verify that your Wi-Fi network is 2.4GHz for device pairing.
• Gather necessary tools (screwdriver, wire strippers if needed).

2. Mounting and Wiring

1. Remove the existing fixture from your outdoor junction box.
2. Connect the wires from the junction box to the quick-connect wiring terminals on the Enbrighten adapter. Ensure proper polarity (Line, Neutral, Ground).
3. Secure the Enbrighten adapter to the junction box using the provided mounting hardware.
4. If mounting a new light fixture or device, connect its wires to the designated terminals on the adapter and secure the fixture.
5. Ensure all connections are tight and secure.

Image Description: This image shows a "Before" and "After" comparison of an outdoor wall. The "Before" image shows a standard outdoor light fixture. The "After" image shows the Enbrighten Add-an-Outlet adapter installed, with the original light fixture now mounted to it, and an additional power cord plugged into one of the new GFCI outlets. This illustrates how the adapter adds outlets where needed.

Image Description: This image provides an overview of the Enbrighten Vibe Add-an-Outlet Adapter. It shows the adapter installed on an outdoor wall, connected to a light fixture. A smartphone screen displaying the Enbrighten app interface is also visible, demonstrating the Wi-Fi control capabilities for both the light and the outlets. Text overlays indicate compatibility with Alexa and Google Assistant.

Operating Instructions

1. Initial Power-Up

Once installation is complete, restore power at the circuit breaker. The GFCI outlets should be ready for use. Press the "RESET" button on the GFCI outlets if they do not provide power initially.

Image Description: This image shows the Enbrighten Add-an-Outlet adapter installed under an eave, with string lights plugged into one of its GFCI outlets. The text overlay emphasizes its weather-resistant design and clarifies that it is certified for wet locations only when the GFCI cover is closed, and for temporary GFCI use when open. This illustrates the device's use as a stand-alone outlet.

2. Enbrighten App Setup (Wi-Fi Control)

1. Download the free Enbrighten app from Google Play or the Apple App Store.
2. Create an account or log in.
3. Follow the in-app instructions to add your Enbrighten Vibe Add-an-Outlet Adapter. Ensure your phone is connected to a 2.4GHz Wi-Fi network during pairing.
4. Once paired, you can independently control the mounted light fixture and the GFCI outlets (ON/OFF) through the app.

Image Description: This image shows the Enbrighten Vibe Add-an-Outlet Adapter installed on an outdoor wall, with a light fixture attached. To the left, two smartphone screens display the Enbrighten app. One screen shows independent ON/OFF controls for "Outlet" and "Light," while the other shows programming options for scheduling. This highlights the Wi-Fi control capabilities of the device.

3. Voice Control (Alexa/Google Assistant)

Once the device is set up in the Enbrighten app, you can link your Enbrighten account to Amazon Alexa or Google Assistant through their respective apps. Follow the instructions provided by Alexa or Google Assistant to enable voice control for your connected light and outlets.

Maintenance

• Periodically inspect the device for any signs of damage or wear.
• Keep the GFCI outlet covers closed when not in use to maintain weather resistance.
• Clean the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Test the GFCI outlets monthly by pressing the "TEST" button, then the "RESET" button. The power should cut off and then restore.

Troubleshooting

• GFCI Outlets Not Working / Cannot Reset:

  If the GFCI outlets do not provide power or the "RESET" button does not engage, ensure the device is properly powered. If power is confirmed, try the following:

  1. Ensure the device is paired with the Enbrighten app.
  2. Within the Enbrighten app, navigate to the device controls and toggle the outlets OFF, then ON. This action can sometimes reset the internal state of the outlets, allowing the physical GFCI reset button to function.
  3. Verify that the total wattage of connected devices does not exceed 600 watts.
  4. If the issue persists, turn off power at the circuit breaker, wait 30 seconds, then restore power and attempt to reset the GFCI again.
• Device Not Connecting to Wi-Fi:

  Ensure your Wi-Fi network is 2.4GHz. Confirm your phone is connected to the 2.4GHz network during the pairing process. Move the device closer to your Wi-Fi router if possible. Restart your router and try pairing again.

• Voice Control Not Responding:

  Verify that your Enbrighten account is correctly linked to your Alexa or Google Assistant app. Check your internet connection and ensure the device is online in the Enbrighten app.

Specifications

Warranty and Support

For warranty information and technical support, please visit the official Enbrighten website or contact their customer service. Keep your purchase receipt for warranty claims.

Enbrighten Support: www.enbrighten.com/support