YOWMOFT Automatic Cat Feeder and Water Dispenser (Model YM01) Instruction Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your YOWMOFT Automatic Cat Feeder and Water Dispenser. This combo set is designed to provide a healthy and structured feeding and hydration routine for your pets, ensuring they are cared for even when you are away.

The automatic feeder features programmable timed feeding with adjustable portions, while the water dispenser provides fresh, filtered water. Both units are constructed from durable, easy-to-clean materials and offer flexible power options.

Package Contents

Please verify that all components are present in your package:

• Automatic Cat Feeder (Main Unit, Pet Food Bucket, Bucket Lid, Protective Cover, Three-blade Rotor, Portioning Rotor, Food Bowl, Stainless Steel Bowl)
• Cat Water Fountain (Water Storage Tank, Intelligent Water Pump, Water Duct, Upper Cover, Filter Cartridge, Filter)
• Chew-resistant Power Cord (for feeder)
• USB Power Cable (for fountain)
• Desiccant Bag (for feeder)
• Filter Set (for fountain, typically 3 filters included)

Figure 1: Exploded view showing all removable parts of the pet feeder and water fountain for easy setup and cleaning.

Setup Instructions

Automatic Cat Feeder Setup:

1. Assemble the Feeder: Place the portioning rotor onto the motor shaft in the main unit. Insert the three-blade rotor into the pet food bucket. Secure the pet food bucket onto the main unit.
2. Install Food Bowl: Attach the food bowl to the front of the main unit. If using the stainless steel bowl, place it inside the food bowl.
3. Add Desiccant: Open the protective cover on the bucket lid and insert the desiccant bag to maintain food freshness. Close the cover securely.
4. Fill with Dry Food: Open the bucket lid and fill the pet food bucket with dry kibble (recommended size 5-12mm). Close the lid securely.
5. Power Connection: Connect the chew-resistant power cord to the feeder and a power outlet. For backup power, insert 3 D-size alkaline batteries (not included) into the battery compartment at the bottom of the unit.

Cat Water Fountain Setup:

1. Assemble the Fountain: Place the intelligent water pump into the water storage tank. Attach the water duct and upper cover.
2. Install Filter: Insert the filter cartridge into its designated slot on the upper cover.
3. Fill with Water: Fill the water storage tank with clean water up to the maximum fill line.
4. Power Connection: Connect the USB power cable to the fountain and a power adapter (not included) plugged into an outlet.

Figure 2: The automatic feeder and water dispenser, highlighting the dual power supply option for the feeder (wired and battery).

Operating Instructions

Automatic Feeder Programming:

The feeder allows you to set up to 4 meals per day, with 0-10 portions per meal (1 portion is approximately 9-10g). Refer to the portion calculation reference for guidance.

Figure 3: Display illustrating the customized feeding options for pets, including meal frequency and portion sizes.

1. Set Current Time: Press and hold the "Set" button until the clock icon flashes. Use the "Up" and "Down" buttons to adjust the hour, then press "Set" to confirm and move to minutes. Repeat for minutes.
2. Program Meal Times: Press "Set" again to enter meal programming mode. The meal number (e.g., "Meal 1") will flash. Use "Up" and "Down" to set the desired feeding time for each meal. Press "Set" to confirm.
3. Set Portions: After setting the meal time, the portion number will flash. Use "Up" and "Down" to select the number of portions (0-10) for that meal. Press "Set" to confirm.
4. Repeat for Additional Meals: Repeat steps 2 and 3 for up to 4 meals. If you do not wish to set all 4 meals, simply set the portion to 0 for the unused meal slots.
5. Manual Feeding: Press the "Manual Feed" button once to dispense one portion immediately.

Figure 4: An example of a private customized feeding schedule, showing meal times and corresponding portion sizes.

Water Fountain Operation:

The water fountain operates continuously when powered. Ensure the water level is maintained above the minimum line to prevent pump damage.

Figure 5: The water fountain displaying visual indicators for low water level and sufficient water level.

The fountain features a circulation filtration system to provide clean and fresh water. The blue light indicates normal operation, while a red light typically signals a low water level, prompting a refill.

Maintenance

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your YOWMOFT Automatic Cat Feeder and Water Dispenser. All removable parts are designed for easy cleaning.

Feeder Maintenance:

• Cleaning: Disassemble the pet food bucket, rotors, and food bowl. Wash these parts with mild soap and water. Rinse thoroughly and dry completely before reassembly. The main unit should be wiped clean with a damp cloth; do not immerse it in water.
• Desiccant Bag: Replace the desiccant bag every 1-2 months, or as needed, to ensure optimal food freshness.
• Food Residue: Periodically check the food dispensing mechanism for any kibble residue that might cause jams.

Water Fountain Maintenance:

• Cleaning: Disassemble the water storage tank, pump, water duct, and upper cover. Wash all parts (except the pump's electrical components) with mild soap and water. Clean the pump thoroughly, including the impeller, to prevent mineral buildup. Rinse and dry completely.
• Filter Replacement: The filter cartridge should be replaced every 30 days to ensure continuous clean water.
• Water Level: Always ensure the water level is sufficient to cover the pump.

Figure 6: Detailed view of the water fountain's filter components (filter sponge, activated carbon, ionic resin) and the desiccant bag for the feeder, emphasizing fresh food and water.

Troubleshooting

If you encounter issues with your YOWMOFT Automatic Cat Feeder and Water Dispenser, please refer to the following common problems and solutions:

Specifications

• Model Number: YM01
• Product Dimensions: 24.8 x 21.26 x 7.87 inches
• Item Weight: 4.06 pounds
• Material: Plastic, Stainless Steel
• Target Species: Cat (suitable for small & medium pets)
• Feeder Capacity: 3 Liters (approx. 12.7 cups)
• Water Fountain Capacity: 2.5 Liters / 84 oz
• Power Source: Feeder: Wired (chew-resistant cord) or 3 D-size batteries (not included); Fountain: Wired (USB cable)
• Operation Mode: Automatic
• Special Features: Adjustable, Feeding Schedule, Programmable, Removable parts, Timer, Desiccant bag, Filtration system
• Product Care Instructions: Hand Wash Only (for removable parts)

Figure 7: Detailed diagram of the feeder and fountain components, illustrating their structure and assembly.

Figure 8: Illustration of the multi-layer filter system for the water fountain and the desiccant bag for the feeder, ensuring fresh provisions.

Warranty and Support

This YOWMOFT product comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your product, please contact YOWMOFT customer service. Please have your model number (YM01) and proof of purchase ready when contacting support.

Contact information can typically be found on the YOWMOFT official website or through your retailer's customer service portal.

Product Videos