1. Introduction
This manual provides essential instructions for the installation, maintenance, and troubleshooting of your OKP HEPA filter replacements. These filters are designed to maintain the optimal performance of your compatible robot vacuum cleaner by effectively capturing dust and allergens.
2. Compatibility
These HEPA filter replacements are compatible with the following robot vacuum cleaner models:
- OKP Life K5
- OKP Life K5P
- Lefant M210
- Lefant M210Pro
Ensure your robot vacuum model matches one of the listed compatible models for proper fit and function.
3. Package Contents
Your package should contain the following items:
- 4 x HEPA Filter Replacements
Image: Four individual OKP HEPA filter replacements, showing their pleated design and pull tabs.
Video: Overview of various robot vacuum parts, including HEPA filters, demonstrating their appearance and design.
4. Installation Guide
Follow these steps to replace the HEPA filter in your robot vacuum cleaner:
- Open the dustbin cover on your robot vacuum.
- Remove the old HEPA filter by pulling on its tab.
- Discard the old filter responsibly.
- Insert the new HEPA filter into the designated slot, ensuring it fits snugly.
- Close the dustbin cover securely.
Image: Step-by-step diagram illustrating how to remove and install a HEPA filter in a robot vacuum cleaner's dustbin.
Video: Demonstrates the process of replacing a HEPA filter in a robot vacuum cleaner, including opening the dustbin, removing the old filter, and inserting a new one.
Video: Shows the installation of a HEPA filter and foam filter into a robot vacuum's dustbin, highlighting the correct placement of each component.
5. Maintenance
Regular cleaning and timely replacement of your HEPA filters are crucial for maintaining your robot vacuum's suction power and air filtration efficiency. It is recommended to clean the filter every 1-2 weeks and replace it every 2-3 months, depending on usage.
Cleaning the HEPA Filter:
- Remove the filter from the dustbin as described in the installation section.
- Gently tap the filter against a trash can to dislodge loose dirt and debris.
- Use a small brush (often included with your vacuum or filter kit) to brush away any remaining dust from the pleated surface.
- Do not wash the HEPA filter with water, as this can damage the filter material and reduce its effectiveness.
- Ensure the filter is completely dry before reinstalling it.
Video: Illustrates how to clean a HEPA filter using a small brush to remove accumulated dust and debris, emphasizing dry cleaning methods.
6. Troubleshooting
If you experience issues after replacing your HEPA filter, consider the following:
- Reduced Suction Power:
- Ensure the filter is installed correctly and seated firmly in the dustbin.
- Check if the filter is clogged. Clean or replace it if necessary.
- Verify that the dustbin is empty and properly closed.
- Unusual Noises:
- Confirm the filter is not loose or improperly installed, which could cause vibrations.
- Dust Escaping:
- Ensure the filter is not damaged or torn. Replace if any damage is visible.
- Check that the dustbin and filter compartment are sealed correctly.
For persistent issues, refer to your robot vacuum's main instruction manual or contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | OKP |
| Material Type | HEPA |
| Compatible Devices | OKP Life K5, K5P; Lefant M210, M210Pro Robotic Vacuums |
| Item Weight | 1.76 ounces (per 4-pack) |
| Product Dimensions | Approximately 1"L x 1"W x 2"H (per filter) |
| Reusability | Reusable (through cleaning, but replacement recommended) |
8. Warranty & Support
For specific warranty information regarding your OKP HEPA filter replacements, please refer to the product packaging or the official OKP website. If you encounter any issues or require further assistance, please contact OKP customer support through their official channels.
You can visit the OKP Store on Amazon for more products and support information.
