KROAK Heavy Duty Truck Ramps User Manual

1. Introduction

Thank you for choosing KROAK Heavy Duty Truck Ramps. These 54-inch wide aluminum folding loading ramps are designed for safely loading ATVs, UTVs, tractors, pickup trucks, lawn mowers, and motorcycles. Featuring a robust trip-fold design, safety straps, and a non-slip surface, they offer reliable performance for various loading needs. This manual provides essential information for the safe and effective use, maintenance, and storage of your ramps.

Figure 1: KROAK Heavy Duty Truck Ramps with included accessories.

The KROAK Heavy Duty Truck Ramps are constructed from durable aluminum, designed for robust performance and ease of use. The image displays the full ramp set, including the two folding ramps, safety straps, and protective gloves.

2. What's in the Box

Upon unpacking, please verify that all components listed below are present and undamaged:

• 1 x KROAK Aluminum Loading Ramp (Trip-Fold Design)
• 2 x Adjustable Safety Straps
• 1 x Pair of Cut-Resistant Gloves
• 1 x User Manual

Figure 2: Contents of the product packaging.

This image illustrates all items included in the KROAK Heavy Duty Truck Ramps package, ensuring users can confirm they have received all necessary components for safe and effective operation.

3. Specifications

Figure 3: Folded dimensions for compact storage.

The image highlights the compact folded dimensions of the KROAK ramps, emphasizing their space-saving design for convenient storage in a truck or garage.

4. Safety Information

WARNING: Failure to follow these safety guidelines may result in serious injury or death.

• Load Capacity: Do not exceed the maximum recommended load capacity of 1500 lbs (1800 lbs absolute maximum). Distribute weight evenly across the ramps.
• Secure Placement: Always ensure the ramps are securely attached to the vehicle's tailgate or trailer using the provided safety straps. The rubber-tipped edges should be firmly seated to prevent slipping.
• Stable Surface: Use the ramps on a stable, level, and non-slip surface. Avoid uneven ground or loose gravel.
• Vehicle Operation: Drive vehicles onto the ramps slowly and carefully. Avoid sudden acceleration or braking. Ensure the vehicle is centered on the ramps.
• Personal Safety: Wear appropriate safety gear, including the provided cut-resistant gloves, when handling and operating the ramps. Keep hands and feet clear of moving parts and pinch points.
• Inspection: Before each use, inspect the ramps for any signs of damage, wear, or deformation. Do not use damaged ramps.
• No Passengers: Do not allow passengers on the vehicle while loading or unloading.

Figure 4: Multi-protective design for enhanced safety.

This image showcases the various safety features integrated into the KROAK ramp design, including rubber-wrapped ends, cut-resistant gloves, smooth edges, and adjustable straps, all contributing to a safer user experience.

Figure 5: Robust construction for increased stability.

The image illustrates the superior construction of KROAK ramps, highlighting the 33 crossbars for increased stability and full welding for enhanced durability compared to other designs.

5. Setup

Follow these steps to set up your KROAK Truck Ramps:

1. Unpack: Carefully remove all components from the packaging.
2. Unfold Ramps: Unfold each ramp from its compact, tri-fold position. Ensure the locking mechanisms on the hinges are fully engaged to secure the ramp in its extended position.
3. Position Ramps: Place the rubber-tipped ends of the ramps firmly against the tailgate of your truck or trailer. Ensure the ramps are parallel and spaced appropriately for your vehicle's wheel track.
4. Attach Safety Straps: Securely attach the provided safety straps from the ramps to a sturdy anchor point on your truck or trailer (e.g., hitch receiver, tie-down points). Ensure the straps are taut to prevent the ramps from slipping or kicking out during loading.

Figure 6: Visual guide for ramp setup and usage.

This visual guide provides a clear sequence of steps for setting up and using the KROAK ramps, from initial unboxing to preparing for vehicle loading.

Figure 7: Adjustable strap usage guide.

This image provides a detailed illustration of how to properly secure the adjustable safety straps to the ramp and the vehicle's tailgate, ensuring maximum stability during loading and unloading.

6. Operating Instructions

Once the ramps are securely set up, you can proceed with loading or unloading your vehicle:

1. Prepare Vehicle: Ensure your vehicle is in good working order and that you are familiar with its controls.
2. Approach Ramps: Align the vehicle with the ramps. Approach the ramps slowly and directly.
3. Load Vehicle: Drive the vehicle onto the ramps at a slow, steady speed. Avoid sudden movements or excessive acceleration. Ensure the vehicle is centered on the ramps as it ascends.
4. Secure Vehicle: Once the vehicle is fully loaded onto the truck or trailer, engage the parking brake and turn off the engine. Secure the vehicle with additional tie-downs if necessary.
5. Unload Vehicle: To unload, reverse the loading process. Carefully back the vehicle down the ramps at a slow, controlled speed.

Figure 8: ATV being loaded onto a truck using KROAK ramps.

This image demonstrates the KROAK 1800lbs capacity ramp in action, showing an ATV being safely loaded onto the bed of a pickup truck, highlighting the ramp's stability and wide design.

7. Maintenance

Proper maintenance will extend the life of your KROAK Truck Ramps:

• Cleaning: Clean the ramps after each use to remove dirt, mud, and debris. Use a mild detergent and water, then rinse thoroughly and allow to dry completely.
• Inspection: Regularly inspect the ramps for any signs of damage, including cracks, bends, loose welds, or worn rubber tips. Check the safety straps for fraying or damage. Replace any damaged components immediately.
• Storage: When not in use, fold the ramps and store them in a dry, secure location away from direct sunlight and extreme temperatures. The compact design allows for easy storage in a truck or garage.

8. Troubleshooting

Here are some common issues and their solutions:

• Ramps are slipping:
  • Ensure safety straps are tightly secured to both the ramps and the vehicle/trailer.
  • Verify that the rubber-tipped ends are fully seated on a clean, dry, and stable surface.
  • Check for any debris under the ramps or on the tailgate that might cause instability.
• Ramps appear unstable during loading:
  • Confirm that the load capacity is not exceeded.
  • Ensure the vehicle is centered on the ramps and driven slowly.
  • Check that the ramps are fully unfolded and their locking mechanisms are engaged.
• Difficulty folding/unfolding:
  • Ensure hinges are free of dirt or debris. Clean and lubricate if necessary.
  • Check that the safety clips are properly disengaged/engaged.

9. Warranty and Support

KROAK stands behind the quality and durability of its products. These ramps are backed by a 100% satisfaction guarantee.

For any questions, concerns, or assistance with your KROAK Heavy Duty Truck Ramps, please do not hesitate to contact our responsive customer service team. Your safety and satisfaction are our top priorities.

Contact information can typically be found on the product packaging or the retailer's website where the product was purchased.