1. Introduction
This manual provides essential information for the safe and efficient operation of your CES Imaging Canon imagePROGRAF PRO-2600 large-format printer. This professional photo and fine art printer features an 11-Color plus Chroma Optimizer Ink System, designed for high-quality prints with excellent scratch resistance and lightfastness. It incorporates intelligent media handling, color calibration, and a sub-ink tank system for optimal performance.
Figure 1: Front view of the Canon imagePROGRAF PRO-2600 printer.
2. Safety Information
Always read and understand all safety instructions before operating the printer. Failure to do so may result in injury or damage to the equipment.
- Ensure the printer is placed on a stable, level surface capable of supporting its weight (approximately 274 pounds).
- Connect the printer to a grounded power outlet. Do not use extension cords or adapters that are not rated for the printer's power requirements.
- Keep hands and loose clothing away from moving parts during operation.
- Do not attempt to open or service internal components unless specifically instructed by this manual or authorized service personnel.
- Keep ink cartridges and other consumables out of reach of children.
3. Setup
3.1 Unboxing and Placement
Carefully remove the printer from its packaging. Due to its weight and dimensions (39"D x 33"W x 46"H), it is recommended to have at least two people for safe handling. Place the printer in a location with adequate space for operation and maintenance, ensuring proper ventilation.
3.2 Power and Network Connection
Connect the power cord to the printer and a suitable power outlet. For network connectivity, use either an Ethernet cable or connect via Wi-Fi. Refer to the printer's display panel for Wi-Fi setup instructions.
3.3 Loading Media
The imagePROGRAF PRO-2600 supports various media types up to 24 inches wide, including glossy photo paper. Follow these steps to load roll paper:
- On the printer's control panel, select the roll paper loading option.
- Open the top cover and the output guide to access the loading area.
- Ensure the roll is placed on the spindle so the material feeds from the top.
- Insert the roll into the roll holder and gently feed the material into the printer until it clicks into place.
- Close the output guide and top cover.
- Select the media type on the control panel and confirm to start feeding.
Video 1: Instructions for loading media into Canon imagePROGRAF PRO Series Printers.
3.4 Installing Ink Cartridges
The printer uses 11 individual pigment-based LUCIA PRO II ink tanks plus a Chroma Optimizer. To install or replace ink tanks:
- Open the ink tank cover.
- Gently push the empty ink tank to release it.
- Insert the new ink tank, ensuring it clicks securely into place.
- Close the ink tank cover.
Video 2: Guide on how to replace ink tanks on the Canon iPF PRO series.
4. Operating
4.1 Printing
Once media and ink tanks are loaded, you can send print jobs from your computer or compatible device. The printer supports maximum color print resolution of 4800 x 1200 dpi and maximum black and white print resolution of 4800 x 1200.
Video 3: Demonstration on how to print using a Canon imagePROGRAF Large Format Printer.
4.2 Media Handling
The printer features intelligent media handling technology to ensure precise feeding and alignment. If the material is skewed, the printer will prompt you to open the lid and lift a lever for manual alignment.
5. Maintenance
5.1 Ink Tank Replacement
Monitor ink levels via the printer's control panel. Replace ink tanks as described in Section 3.4. Always use genuine Canon ink tanks for optimal performance and print quality.
5.2 General Cleaning
Regularly clean the exterior of the printer with a soft, damp cloth. Avoid using abrasive cleaners or solvents. Keep the print head area free of dust and debris.
6. Troubleshooting
If you encounter any issues with your printer, refer to the on-screen messages on the control panel for guidance. Common issues include:
- Paper Jams: Follow on-screen instructions to clear any jammed paper.
- Ink Errors: Ensure all ink tanks are correctly installed and have sufficient ink.
- Connectivity Problems: Verify network connections (Ethernet or Wi-Fi) and ensure the printer is properly configured on your device.
For persistent issues, consult the full digital manual or contact customer support.
7. Specifications
- Model Name: PRO-2600
- Brand: CES Imaging
- Product Dimensions: 39"D x 33"W x 46"H
- Item Weight: 274 pounds
- Printing Technology: Inkjet
- Ink System: 11-Color plus Chroma Optimizer (LUCIA PRO II Pigment-Based Ink)
- Ink Colors: Black, Cyan, Magenta, Yellow, Light Cyan, Light Magenta, Gray, Red, Green, Blue, Chroma Optimizer
- Maximum Media Size: 24 inches
- Print Media: Glossy photo paper (compatible with various fine art media)
- Maximum Color Print Resolution: 4800 x 1200 dpi
- Maximum Black and White Print Resolution: 4800 x 1200
- Connectivity Technology: Ethernet, Wi-Fi
- Included Components: Inkjet Cartridges
- Special Features: Fine Art Printer, Photo Printer, Intelligent media handling, Color Calibration, Sub-ink tank system, Translucent media & ink tank covers, Internal light preview systems.
- Environmental Certifications: EPEAT Gold, ENERGY STAR certified
8. Warranty
This product comes with a 1-year on-site limited warranty. For detailed terms and conditions, please refer to the warranty documentation included with your printer or contact CES Imaging customer support.
9. Support
For technical assistance, troubleshooting, or service inquiries, please contact CES Imaging. As a Canon Platinum Reseller, CES Imaging is equipped to provide expert support for your imagePROGRAF PRO-2600 printer.