HOOBRO Floating TV Stand (Model BK34UDDS01) Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your HOOBRO Floating TV Stand, Model BK34UDDS01. This wall-mounted entertainment center is designed to accommodate TVs up to 65 inches and features integrated LED lighting and a power outlet for enhanced functionality. Please read this manual thoroughly before beginning assembly or use to ensure proper installation and safe operation.

Important Safety Information

• This floating shelf is suitable for solid walls only, including concrete, wood, and brick walls. It is not designed for installation on hollow walls or drywall without proper reinforcement.
• Avoid prolonged placement of bulky and heavy items on the shelf to prevent structural damage.
• Keep children from climbing on the shelf to prevent injury and damage to the unit.
• Ensure all electrical connections are secure and comply with local electrical codes. Do not overload the power outlets.
• Always use the provided hardware and follow assembly instructions carefully.

Figure 1: Wall compatibility diagram. This floating shelf is designed for solid walls such as brick, concrete, or wood. It is not suitable for cavity walls or gypsum board walls.

Package Contents

Before beginning assembly, verify that all components are present and undamaged. Refer to the included hardware and parts list in your packaging. If any parts are missing or damaged, contact customer support.

• Floating TV Stand components (Engineered Wood panels)
• Assembly hardware (screws, anchors, brackets)
• Integrated power outlet unit (3 AC outlets, 2 USB ports)
• LED light strip with remote control
• Instruction manual

Assembly Instructions

The HOOBRO Floating TV Stand is designed for straightforward assembly. It comes with all necessary hardware and clear instructions. Two people are recommended for assembly and installation.

Tools Required (Not Included):

• Phillips head screwdriver
• Drill (for wall mounting)
• Level
• Measuring tape
• Pencil

General Assembly Steps:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts list.
2. Assemble the Main Structure: Follow the step-by-step diagrams in the included manual to connect the engineered wood panels using the provided screws and fasteners. Ensure all connections are tight and secure.
3. Install the Power Outlet: Integrate the 3 AC outlets and 2 USB ports into the designated slot on the TV stand. Ensure the power cord is routed correctly.
4. Attach the LED Light Strip: Adhere the LED light strip to the interior of the shelf as indicated in the manual. Connect it to the power source.
5. Prepare for Wall Mounting:
   • Choose a suitable solid wall location (brick, concrete, or wood studs). Do not mount on hollow walls or drywall without professional reinforcement.
   • Measure and mark the desired height and mounting points on the wall using a level and pencil.
   • Drill pilot holes at the marked locations. Insert wall anchors if required for your wall type.
6. Mount the TV Stand: Carefully lift the assembled TV stand and align the mounting brackets with the drilled holes. Secure the stand to the wall using the provided screws. Ensure it is level and firmly attached before placing any items on it.

Figure 2: The HOOBRO Floating TV Stand with its front panel open, showcasing the integrated power outlet and LED lighting.

Figure 3: Detailed view of the TV stand's features, including cable management holes, rounded edges for safety, and a secure door closure mechanism.

Operating Instructions

LED Lighting System

The integrated LED light strip provides ambient lighting with customizable colors. Use the included remote control to:

• Turn the lights On/Off.
• Change colors (e.g., red, green, blue, purple, orange).
• Adjust brightness levels.
• Select various lighting modes (e.g., static, fade, flash).

Figure 4: The TV stand with purple LED lighting, complementing a modern entertainment setup.

Figure 5: The TV stand with orange LED lighting, creating a warm ambiance in a living room setting.

Integrated Power Outlet

The TV stand includes a built-in power strip with 3 AC outlets (125V/12A) and 2 USB ports (5V/2A). This allows for convenient charging and powering of your electronic devices directly from the stand.

• Connect your TV, gaming console, Wi-Fi router, DVD player, or other devices to the AC outlets.
• Use the USB ports to charge smartphones, tablets, or other USB-powered accessories.
• Ensure the total power draw of connected devices does not exceed the specified limits (125V/12A).

Figure 6: The integrated power outlet featuring 3 AC outlets and 2 USB ports for convenient device connectivity.

Cable Management

The TV stand features specially designed cable holes to help organize and conceal wires, maintaining a tidy appearance for your entertainment area.

• Route all power and signal cables through the designated cable holes at the back of the unit.
• Utilize cable ties (not included) to bundle and secure excess wiring within the stand's compartments.

Maintenance and Care

• Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the engineered wood finish.
• Dusting: Regularly dust the unit to prevent buildup, especially around the LED lights and power outlets.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
• Environmental Conditions: Avoid exposing the TV stand to direct sunlight, extreme temperatures, or high humidity, as these can affect the material's integrity and appearance.

Troubleshooting

This section addresses common issues you might encounter with your HOOBRO Floating TV Stand.

• LED Lights Not Working:
  • Check if the power cord for the LED lights is securely plugged into a working outlet.
  • Ensure the remote control batteries are functional and correctly inserted.
  • Verify that the LED strip connection to the power unit is secure.
• Power Outlets Not Functioning:
  • Confirm the main power cord of the TV stand is plugged into a live wall outlet.
  • Check if the connected devices are properly plugged into the outlets.
  • Avoid overloading the outlets; unplug some devices if the total wattage exceeds the limit.
• Stand Feels Unstable After Mounting:
  • Re-check all wall mounting screws and ensure they are tightly secured.
  • Verify that the wall type is suitable for mounting (solid wall recommended). If mounted on drywall, ensure proper anchors or stud mounting was used.
  • Ensure the weight on the shelf does not exceed its capacity.

If you encounter issues not covered here, please contact HOOBRO customer support for assistance.

Product Specifications

Figure 7: Dimensional overview of the HOOBRO Floating TV Stand, including length, depth, height, and TV size compatibility.

Warranty and Support

Specific warranty details for the HOOBRO Floating TV Stand are typically provided with your purchase documentation or on the product's official sales page. For warranty claims, technical support, or replacement parts, please contact HOOBRO customer service directly through their official website or the retailer where the product was purchased.

Please retain your proof of purchase for any warranty-related inquiries.