1. Introduction
This manual provides comprehensive instructions for the safe and efficient use of your SKINACT Bellage Electric Treatment Table. Please read this manual thoroughly before operating the equipment and retain it for future reference. The SKINACT Bellage Electric Treatment Table is designed for professional use in spas, salons, esthetic studios, and wellness centers, offering adjustable positioning for various beauty and wellness services.
2. Safety Information
Important Safety Precautions:
- Do not exceed the weight limit of 350 lbs.
- Exercise caution when adjusting the chair to its maximum tilt and incline angles.
- Ensure the remote control cord is positioned away from walking paths to prevent tripping hazards.
- Always ensure the power adapter is securely connected to a grounded outlet.
- Keep liquids away from electrical components.
- Do not attempt to disassemble or repair the unit yourself. Contact qualified service personnel.
3. Setup
The SKINACT Bellage Electric Treatment Table requires no assembly. Upon delivery, ensure all packaging materials are removed and the unit is placed on a stable, level surface.
- Unpacking: Carefully remove the treatment table from its packaging. Inspect for any shipping damage.
- Placement: Position the table in its intended location, ensuring adequate space around it for operation and client access.
- Power Connection: Connect the power adapter to the designated port on the table and then plug it into a standard electrical outlet.
- Remote Control: Connect the handheld remote control to its port.
- Accessories: Attach removable armrests and the adjustable headrest as needed. The table includes an extra removable headrest cushion and a face cradle.
Image: Front view of the SKINACT Bellage Electric Treatment Table, showcasing its design and components.
4. Operating Instructions
The SKINACT Bellage Electric Treatment Table features four independent electric motors controlled by a handheld remote for precise adjustments.
4.1 Handheld Remote Control
The handheld remote allows for individual adjustment of the table's sections. Familiarize yourself with the buttons on the remote:
- Height Adjustment: Use the UP/DOWN buttons to raise or lower the entire table.
- Backrest Adjustment: Use the corresponding buttons to adjust the angle of the backrest.
- Seat Tilt Adjustment: Adjust the tilt of the seat section.
- Leg Rest Adjustment: Control the angle of the leg rest.
Image: Illustration of the electric height adjustment feature.
Image: Illustration of the electric backrest adjustment feature.
Image: Illustration of the electric leg rest adjustment feature.
Image: Illustration of the electric seat tilt adjustment feature.
4.2 General Operation Tips
- Always ensure the client is safely positioned before making adjustments.
- Make smooth, gradual adjustments to avoid startling the client.
- Utilize the removable armrests and adjustable headrest to maximize client comfort for different procedures.
Video: Demonstration of the Bellage Electric Treatment Table's 4 electric motors in action, showing various adjustments.
Video: Overview of the SKINACT Bellage Electric Treatment Table, highlighting its features and functionality.
5. Maintenance
Proper maintenance ensures the longevity and hygienic operation of your treatment table.
- Cleaning Upholstery: The premium PU upholstery is designed for easy cleaning. Wipe surfaces with a dry cloth after each use. For deeper cleaning, use a mild, non-abrasive cleaner specifically designed for PU materials. Avoid harsh chemicals or solvents that may damage the upholstery.
- Frame Cleaning: Wipe the steel frame and base with a damp cloth to remove dust and debris.
- Motor Inspection: Periodically check the motor areas for any obstructions or unusual noises. Keep the area clear of dust and hair.
- Cord Management: Ensure the power cord and remote control cord are not pinched or tangled.
6. Troubleshooting
If you encounter issues with your SKINACT Bellage Electric Treatment Table, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Table does not power on. | Power cord disconnected; outlet malfunction; power adapter issue. | Check power cord connection to both the table and the wall outlet. Test the outlet with another device. Ensure the power adapter is not damaged. |
| Motors are not responding to remote. | Remote control cable disconnected; remote control malfunction. | Ensure the remote control cable is securely plugged into the table. If the issue persists, contact customer support. |
| Unusual noise during operation. | Obstruction in motor mechanism; loose components. | Inspect for any visible obstructions. If none, cease operation and contact customer support. |
| Table movement is jerky or inconsistent. | Motor strain; electrical issue. | Ensure the weight limit is not exceeded. Check power connections. If the problem continues, contact customer support. |
7. Specifications
Key specifications for the SKINACT Bellage Electric Treatment Table:
- Model Number: SKU164244
- Color: Taupe
- Dimensions (L x W x H): 68 x 28 x 32 inches (approximate, without headrest/footrest extension)
- Adjustable Height: Approximately 24–36 inches
- Weight Capacity: 350 lbs
- Item Weight: 200 pounds
- Motors: 4 Electric Motors (for height, backrest, seat tilt, leg rest)
- Upholstery Material: Premium PU Upholstery
- Frame Material: Alloy Steel
- Included Components: Extra Removable Headrest Cushion, Face Cradle, Handheld Remote Control, Power Adapter, Removable Armrests
- Assembly: No assembly required
Image: Detailed dimensions and features diagram of the treatment table.
8. Warranty and Support
The SKINACT Bellage Electric Treatment Table includes a 1-Year Manufacturer's Warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical assistance, or any questions regarding your product, please contact SKINACT customer support:
- Manufacturer: SKINACT
- Seller: SKINACT (via Amazon)
- Contact Information: Refer to your purchase documentation or visit the official SKINACT website for the most current support contact details.
Please have your model number (SKU164244) and proof of purchase available when contacting support.