Pulluty W11130362 Washer Suspension Rod Kit User Manual

1. Product Overview

The Pulluty W11130362 Washer Suspension Rod Kit is designed to replace worn or broken suspension rods in compatible top-load washing machines. These rods are crucial for maintaining the balance of the washer tub, minimizing vibration, and reducing noise during operation. Replacing faulty suspension rods can extend the lifespan of your washing machine and improve its performance.

Figure 1: Complete Washer Suspension Rod Kit, including four rods, suspension balls, and bushings.

2. Package Contents

Each Pulluty W11130362 Washer Suspension Rod Kit includes the following components:

• 4 x Suspension Rods (approximately 23.2 inches long)
• 5 x Suspension Balls
• 5 x Bushings

The rods are constructed from stainless steel for durability and water resistance, preventing rust and ensuring long-term performance.

Figure 2: Detailed view of the kit components, including rods, balls, and bushings.

3. Compatibility

This suspension rod kit (Part Number W11130362) is compatible with a wide range of Whirlpool, Maytag, Kenmore, and Crosley top-load washing machine models. Please verify your washer's model number against the list below or consult your appliance's documentation to ensure compatibility.

Compatible Models Include:

Figure 3: Partial list of compatible washing machine models.

• Whirlpool: MVWC565FW0, 8TWTW5010PW0, 8TWTW5010PW1, 8TWTW6000JW0, 8TWTW6000JW1, MVW4505MW0, MVWX655DW0, WTW5000DW0, WTW5000DW1, WTW5000DW2, WTW5000DW3, WTW5005KW0, WTW5010LW0, WTW5010LW1, WTW5015LW0, WTW5015LW1
• Maytag: 7MMVWC565FW0, MVWC565FW0, 7MMVWC565FW1, 7MMVWX655EW0, MVW4505MW0, MVW4505MW1, MVW4505MW2, MVW5035MW0, MVW5035MW1, MVW5035MW2, MVW5430MW0, MVWC555DW0, MVWC555DW1, MVWC565FW1
• Kenmore: 11022352511, 11022352510, 11025132410, 11025132411
• Crosley: CAW42114GW1, CAW42114GW0, CAW42114GW2, CAW45125LW0

This kit replaces part numbers W10594080, W10735786, W10748956, W10780040, W10821710, W10901056, W11027174, W11033491, and W11228718.

4. Installation Guide

Replacing washer suspension rods typically involves accessing the washer's internal components. It is recommended to consult your specific washer's service manual for detailed, model-specific instructions. Always ensure the appliance is unplugged from the power source before beginning any repair work.

General Steps:

1. Preparation: Disconnect the washer from the power supply and water lines. Move the washer to an open area for easier access.
2. Accessing Rods: Depending on your model, you may need to remove the top panel or the entire outer casing of the washer to access the suspension rods.
3. Removing Old Rods: Carefully lift the washer tub and unhook the old suspension rods from their mounting points. Note the orientation of the components for reassembly.
4. Installing New Rods: Attach the new suspension rods, ensuring the springs, suspension balls, and bushings are correctly positioned. The green caps should be at the top.
5. Reassembly: Reattach the washer panels and reconnect power and water lines. Test the washer for proper balance and reduced vibration.

Figure 4: Visual representation of the installation process.

Installation Video Reference:

5. Troubleshooting Common Issues

If your washing machine exhibits any of the following symptoms, replacing the suspension rods may resolve the issue:

• Excessive Shaking or Vibration: The washer tub moves violently or shakes excessively during the spin cycle.
• Loud Noises: Banging, thumping, or grinding sounds during operation, especially during agitation or spin.
• Unbalanced Loads: The washer frequently stops or displays an "unbalanced load" error, even with properly distributed laundry.
• Washer "Walking": The appliance moves across the floor during operation.

These symptoms often indicate worn or broken suspension rods, which prevent the tub from being properly supported and balanced.

Figure 5: Visual indicators of potential washing machine issues that new suspension rods can address.

6. Product Specifications

7. Warranty and Support

Pulluty offers a 360-day warranty or money-back service for this product. For any questions regarding compatibility, installation, or product performance, please contact Pulluty customer support for assistance.