1. Introduction
This user manual provides essential information for the safe and efficient operation, installation, and maintenance of your EVVO CE10 60cm Telescopic Extractor Hood. Please read this manual thoroughly before using the appliance and keep it for future reference.
2. Safety Information
Always adhere to the following safety precautions to prevent personal injury or damage to the appliance.
- Ensure the electrical installation complies with local regulations.
- Do not operate the hood without filters properly installed.
- Regularly clean grease filters to prevent fire hazards.
- Do not flambé under the range hood.
- Disconnect the appliance from the power supply before any cleaning or maintenance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Setup and Installation
The EVVO CE10 extractor hood is designed for under-cabinet mounting. Proper installation is crucial for optimal performance and safety.
3.1 Dimensions and Placement
The hood measures 32 cm (depth) x 60 cm (width) x 19.4 cm (height). Ensure sufficient space above your cooking area for installation. The hood is designed for ductless/recirculating ventilation.
Text Description: This image displays a technical diagram of the EVVO CE10 extractor hood, providing precise measurements for installation. The top view shows a width of 60cm and a depth of 53cm, with a circular duct outlet of 15cm diameter. The side view illustrates the height of 19.4cm, with additional details on the telescopic pull-out section, indicating a total depth range from 32cm to 42cm when extended.
3.2 Mounting
The hood is designed for under-cabinet mounting. Securely fasten the hood to the underside of your kitchen cabinet using appropriate screws and anchors (not included). Ensure the mounting surface is strong enough to support the hood's weight of 12 kg.
Text Description: This image shows the EVVO CE10 extractor hood seamlessly integrated into a contemporary kitchen setting, positioned directly above a stovetop. The hood is actively extracting fumes, demonstrating its function in maintaining a smoke-free environment. The text overlay emphasizes its ability to keep the kitchen free of smoke.
4. Operating Instructions
The EVVO CE10 features simple push-button controls for fan speed and lighting.
4.1 Power and Fan Speed
The hood is equipped with a 70W motor providing a powerful suction capacity of 350 m³/h. There are two adjustable speeds to suit your cooking needs:
- Speed 1: For light cooking and simmering.
- Speed 2: For heavy cooking, frying, and strong odors.
Press the corresponding push-button to select the desired speed. Press again to turn off the fan.
Text Description: This image highlights the aesthetic appeal of the EVVO CE10 extractor hood, focusing on its stainless steel construction. The hood is shown installed in a kitchen, emphasizing its modern and elegant design that complements various kitchen decors. The text overlay states "Designed in stainless steel," reinforcing this key feature.
4.2 LED Lighting
The hood includes a 1.5W LED light to illuminate your cooking surface. Press the light button to turn the light on or off.
Text Description: This image features the EVVO CE10 extractor hood in a kitchen setting, with a prominent 'A' energy efficiency rating symbol displayed. The accompanying text overlay, "Eficiencia energética A" (Energy efficiency A), highlights the product's low energy consumption and environmental benefits, indicating it helps reduce electricity bills and environmental impact.
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your EVVO CE10 extractor hood.
5.1 Cleaning the Exterior
Clean the stainless steel exterior with a soft cloth and a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive pads, as they can damage the finish.
5.2 Filter Maintenance
The hood is equipped with a 3-layer aluminum grease filter and an active carbon filter.
- Aluminum Grease Filter: This filter traps grease particles. It should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to maintain efficiency and prevent fire hazards. The aluminum filter is washable and can be cleaned by hand with hot soapy water or in a dishwasher.
- Active Carbon Filter: This filter neutralizes odors. It is not washable and needs to be replaced periodically (approximately every 3-6 months, depending on usage). Refer to the manufacturer's guidelines for replacement part numbers.
5.3 Light Bulb Replacement
The hood uses LED lighting. If replacement is necessary, ensure the appliance is disconnected from power. For information on recycling and cleaning broken light bulbs, please refer to relevant local guidelines.
6. Troubleshooting
If you encounter issues with your EVVO CE10 extractor hood, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not turn on | No power supply | Check power cord connection and circuit breaker. |
| Low suction power | Clogged grease filters or carbon filters | Clean aluminum filters or replace carbon filters. |
| Excessive noise | Loose parts or improper installation | Check for loose screws or ensure proper mounting. |
| Lights not working | Faulty LED light or electrical connection | Check connections. If LED is faulty, contact support for replacement. |
If the problem persists after attempting these solutions, please contact EVVO customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | V0317 |
| Dimensions (L x W x H) | 32 x 60 x 19.4 cm |
| Weight | 12 Kilograms |
| Material | Stainless Steel |
| Airflow Capacity | 350 m³/h |
| Motor Wattage | 70W (65W listed in some specs) |
| Lighting Type | LED (1.5W) |
| Control Method | Push Button |
| Number of Speeds | 2 |
| Filter Type | 3-layer Aluminum and Active Carbon |
| Ventilation Type | Ductless/Recirculating |
| Noise Level | 68 dB |
| Energy Efficiency Class | A |
| Voltage | 120V |
| Mounting Type | Under-cabinet mounting |
| Components Included | Extractor Hood, Aluminum Filters, Active Carbon Filters |
8. Warranty and Support
8.1 Spare Parts Availability
Spare parts for this appliance are available in the EU for a duration of 10 years from the date of purchase.
8.2 Customer Support
For any questions, technical assistance, or warranty claims, please contact your retailer or the EVVO customer support service. Keep your purchase receipt as proof of purchase.