Canicom Midland Charger for Beeper One GPS Tracker Collar - User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Canicom Midland Charger. This charger is specifically designed to power and recharge the Midland Beeper One GPS Tracker collar. Please read this manual thoroughly before using the product and retain it for future reference.

2. Safety Information

• Use only the provided charger with the Midland Beeper One GPS Tracker collar. Using unauthorized chargers may damage the device or pose safety risks.
• Do not expose the charger to water, moisture, or extreme temperatures.
• Avoid dropping or subjecting the charger to severe impact.
• Do not attempt to disassemble or modify the charger. This will void the warranty and could lead to electric shock or fire.
• Keep the charger out of reach of children and pets.
• Unplug the charger from the power outlet when not in use or during electrical storms.

3. Package Contents

Verify that all items are present in the package:

• 1 x Canicom Midland Charger Unit
• 1 x USB-C Cable
• 1 x 220V Type C (European) Power Adapter

4. Product Overview

The Canicom Midland Charger consists of a charging dock, a USB-C cable, and a power adapter. It is designed for convenient and reliable charging of your Midland Beeper One GPS Tracker collar.

Figure 4.1: Components of the Canicom Midland Charger, including the charging dock, the 220V Type C power adapter, and the USB-C charging cable.

The charger is specifically designed to interface with the Midland Beeper One GPS Tracker collar, ensuring a secure and efficient charging process.

Figure 4.2: An illustration of a dog wearing the Midland Beeper One GPS Tracker collar, the device for which this charger is intended.

5. Setup

1. Connect the Power Adapter: Insert the USB-C cable into the charging dock.
2. Connect to Power: Plug the 220V Type C power adapter into a standard European wall outlet.
3. Prepare the Collar: Ensure the Midland Beeper One GPS Tracker collar is clean and dry before placing it on the charger.

6. Operating

1. Place Collar on Charger: Carefully place the Midland Beeper One GPS Tracker collar into the charging dock, ensuring the charging contacts align correctly. The collar should fit snugly into the dock.
2. Charging Indication: The collar or charger may have an indicator light to show charging status (e.g., red for charging, green for fully charged). Refer to the Midland Beeper One GPS Tracker collar's manual for specific indicator light behavior.
3. Charging Time: Charging time may vary depending on the battery level of the collar. Typically, a full charge takes several hours.
4. Remove After Charging: Once the collar is fully charged, remove it from the charging dock and unplug the charger from the power outlet.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the charger and its contacts. Do not use liquid cleaners or abrasive materials.
• Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
• Cable Care: Avoid bending or twisting the USB-C cable excessively to prevent damage.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your Midland Beeper One GPS Tracker collar or visit the official Canicom website. Keep your proof of purchase for warranty claims.

For further assistance, please contact Canicom customer service through their official channels.