TAKOCI Replacement Li-ion Battery User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your TAKOCI Replacement Li-ion Battery. This battery is designed to be compatible with Intermec CK70 and CK71 devices, offering a reliable power source with a capacity of 6800mAh and a voltage of 3.7V.

Image 1.1: Front view of the TAKOCI Replacement Li-ion Battery, showing model number 318-046-001 and capacity 6800mAh.

2. Safety Information and Precautions

CAUTION!

• Do not disassemble, short-circuit terminals, or dispose of in fire.
• Risk of fire and burns. Charging temperature is 0°C-45°C (32°F-113°F).
• Keep the battery away from water and excessive heat.
• This battery features effective protection against over-charge, over-discharge, over-heat, over-current, and short-circuit conditions.
• Use only specified chargers for this battery.

3. Setup and Installation

3.1. How to Replace the Battery

1. Save your files and close all open applications on your device.
2. Press the Power button, and then select Hibernate from the menu to suspend the device.
3. Detach any hand strap from the device.
4. Ensure the device is in hibernate mode and the screen is off.
5. Remove the existing battery from the device.
6. Insert the top end of a fully charged battery into the device, and press down firmly on the bottom until the battery clicks into place. Make sure that the battery latch is fully engaged.
7. Attach the hand strap if applicable.
8. Press the Power button to resume operation.

Image 3.1: Visual guide illustrating the steps for battery replacement in a compatible Intermec device.

3.2. Charging the Battery

It is recommended to fully charge the battery before its first use. The battery can be charged either before or after installation in the device. A fully discharged battery typically requires approximately 6 hours to reach a full charge.

Image 3.2: The battery shown with a reminder to fully charge before initial use, indicating a 6-hour charging time for a depleted battery.

4. Operating Instructions

Once installed and charged, the battery will power your Intermec CK70 or CK71 device. Monitor the device's battery indicator to determine the remaining charge. For optimal performance, avoid completely draining the battery frequently.

5. Maintenance

• Store the battery in a cool, dry place when not in use.
• Avoid exposing the battery to extreme temperatures (hot or cold) for prolonged periods, as this can degrade performance and lifespan.
• If storing for an extended period, charge the battery to approximately 50% capacity.
• Clean the battery contacts periodically with a dry, soft cloth to ensure good connection.

6. Troubleshooting

• Battery not charging: Ensure the battery is correctly seated in the device and the charger is properly connected and functioning. Verify that the charging temperature is within the specified range (0°C-45°C).
• Short battery life: This could be due to heavy device usage, background applications, or an aging battery. Ensure the battery is fully charged before use.
• Device not powering on: Check if the battery is fully charged and correctly installed. If issues persist, contact support.

7. Specifications

Image 7.1: Visual representation of battery specifications including capacity, energy rate, voltage, type, and physical dimensions.

Image 7.2: The TAKOCI battery shown with images of compatible Intermec CK70 and CK71 devices.

8. Warranty and Support

Your TAKOCI Replacement Li-ion Battery comes with a 12-month warranty and a 14-day money-back guarantee. We are committed to providing reliable after-sales service.

8.1. Customer Support

For any questions or assistance, please feel free to contact us. We offer 24/7 email support and provide 1-year free replacements and lifetime free-updates service for eligible issues.

Please ensure that the PART NUMBER (P/N) of your original battery matches one of the supported part numbers (1001AB01, 1001AB02, 318-046-001, 318-046-011, AB18) before purchase to ensure compatibility.