Introduction
This manual provides essential instructions for the safe and efficient setup, operation, and maintenance of your HOYECHI 3-Piece Lighted Prismatic Reindeer Outdoor Christmas Decorations. Please read thoroughly before assembly and use to ensure proper functionality and longevity of your product.
Safety Information
- Always unplug the decoration from the power source before assembly, disassembly, or maintenance.
- Ensure all electrical connections are secure and protected from moisture, especially for outdoor use.
- Do not overload electrical outlets.
- Keep away from heat sources and open flames.
- This product is designed for decorative purposes only and is not a toy. Keep out of reach of small children.
- Use only the provided adapter and components.
- Inspect the product for damage before each use. Do not use if wires are frayed or lights are broken.
Package Contents
Verify that all components are present before beginning assembly.
- 1 x Buck (Large Reindeer)
- 1 x Doe (Medium Reindeer)
- 1 x Fawn (Small Reindeer)
- 1 x Power Adapter (3-in-1 power cable)
- 12 x Ground Stakes
- 15 x Zip Ties
- User Manual
Important Note: If the 3-in-1 power cable is missing, please contact HOYECHI customer support for a free replacement.
Image Description: A flat lay of all components included in the package, illustrating the main body sections, legs, head, antlers, power adapter, ground stakes, and zip ties.
Setup Instructions
Follow these steps to assemble your HOYECHI Lighted Prismatic Reindeer set.
Step 1: Prepare Components
Carefully unpackage all parts. Remove any protective film from the prismatic material.
Step 2: Assemble Legs to Body
For each reindeer, connect the legs to the main body section using the provided screws or integrated connectors. Ensure a secure fit.
Video Description: This video demonstrates the process of attaching the legs to the main body of a prismatic reindeer using screws and connecting the internal wiring.
Step 3: Attach Neck and Head
Connect the neck section to the body. Insert the metal hook from the neck into the small circle on the body to secure it. Then, connect the head to the neck, ensuring all electrical connectors are twisted closely.
(Refer to the video above for visual guidance on connecting body parts and electrical plugs.)
Step 4: Install Ears and Antlers
Insert the ears' stakes into the small tubes on the head. Similarly, insert the antlers' stakes into their corresponding tubes on the head. Connect any associated electrical plugs by twisting them closely.
(Refer to the video above for visual guidance on attaching ears and antlers.)
Step 5: Secure Tail (if applicable)
For the doe and fawn, insert the tail into the designated tube on the body.
Step 6: Final Placement and Securing
Position the assembled reindeer in your desired outdoor location. Use the provided ground stakes to firmly anchor the reindeer to the ground. Utilize zip ties for additional stability, especially in windy conditions.
Image Description: The fully assembled HOYECHI 3-Piece Lighted Prismatic Reindeer set, consisting of a buck, doe, and fawn, illuminated in a snowy outdoor setting.
Operating Instructions
Power Connection
Connect the 3-in-1 power cable to the designated ports on each reindeer. Ensure all connections are tight to prevent moisture ingress. Plug the power adapter into a suitable outdoor-rated electrical outlet.
Illumination
The LED lights will illuminate once connected to power. There are no additional controls for light modes; the lights provide a steady, iridescent glow.
Video Description: A short video showcasing the HOYECHI 3-Piece Lighted Prismatic Reindeer set illuminated at night, highlighting its vibrant and iridescent light display.
Maintenance
Cleaning
- Disconnect from power before cleaning.
- Wipe the prismatic material gently with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Ensure the product is completely dry before reconnecting to power.
Storage
- Disassemble the reindeer by reversing the assembly steps.
- Store all components in their original packaging or a dry, protected area to prevent damage.
- Avoid stacking heavy items on top of the stored decorations.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights not illuminating | Loose power connection, faulty outlet, damaged cable/adapter | Check all plug connections, test the outlet with another device, inspect cables for damage. Contact support if cable/adapter is faulty. |
| Reindeer unstable | Insufficient anchoring | Ensure all ground stakes are fully inserted. Use additional zip ties to secure to fixed objects if necessary. |
| Prismatic material appears dull | Protective film not removed, dirt/debris | Remove any remaining protective film. Clean the surface gently with a damp cloth. |
Specifications
- Brand: HOYECHI
- Model Number: HYC8023
- Item Weight: 12.6 Pounds
- Frame Material: Metal
- Light Color: Multicolor (Iridescent)
- Number of Light Sources: 465 LED Lights
- Voltage: 110 Volts
- Product Dimensions (Buck): 24" (L) x 10" (W) x 54" (H)
- Product Dimensions (Doe): 24" (L) x 10" (W) x 44" (H)
- Product Dimensions (Fawn): 17" (L) x 8" (W) x 30.5" (H)
- Material: LED, Metal, Prismatic Fabric
- Theme: Christmas
Warranty and Support
For any missing parts, defects, or support inquiries, please contact HOYECHI customer service. Refer to the product packaging or the retailer's website for specific warranty details and contact information.
As noted in the package contents, if your 3-in-1 power cable is missing, please contact us for a free replacement.