Introduction
Thank you for choosing the Edifier W800BT SE Wireless Over-Ear Headphones. This manual provides detailed instructions for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before use.
Package Contents
Verify that all items are present in your package:
- Edifier W800BT SE Headphones x 1
- USB Type-C Charging Cable x 1
- User Manual x 1
Product Overview
Headphone Features
- 40mm Dynamic Drivers: Equipped with titanium-coated diaphragm driver units for clear and detailed audio.
- Bluetooth 5.4: Provides stable and efficient wireless connectivity.
- AI Call Noise Reduction: Enhances voice clarity during calls by filtering background noise.
- Multipoint Connection: Allows simultaneous connection to two Bluetooth devices.
- Long Battery Life: Up to 45 hours of playback.
- Fast Charging: 15 minutes of charge provides 8 hours of playback.
- Low Latency Game Mode: Reduces audio delay for gaming.
- Comfortable Design: Lightweight (approx. 242g), adaptive fit, pressure-relief headband, and soft earpads.
- Foldable Design: For easy storage and portability.
Controls and Ports
The Edifier W800BT SE headphones feature intuitive button controls on the earcup and a USB-C port for charging.
Image: Overview of headphone controls and USB-C charging port.
- Volume Up Button: Single press for volume up, press and hold for next track.
- Multi-function Button: Single press for play/pause or answer/end call, double press to reject call, triple press for voice assistant.
- Volume Down Button: Single press for volume down, press and hold for previous track.
- Mode Switch Button: Single press to cycle through Music mode, Game mode, and Theatre mode.
- USB-C Port: For charging the headphones.
Setup
1. Charging the Headphones
Before first use, fully charge the headphones. A full charge takes approximately 1.5 hours. A 15-minute quick charge provides up to 8 hours of playback.
- Connect the supplied USB Type-C cable to the charging port on the headphones.
- Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
- The indicator light will show charging status (e.g., red for charging, off when fully charged).
Image: USB-C charging port.
Image: Battery life and fast charging details.
2. Power On/Off
- Power On: Press and hold the Multi-function button for approximately 3 seconds until the indicator light flashes.
- Power Off: Press and hold the Multi-function button for approximately 5 seconds until the indicator light turns off.
3. Bluetooth Pairing
To connect your headphones to a device:
- Ensure the headphones are powered off.
- Press and hold the Multi-function button for approximately 5 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "EDIFIER W800BT SE" from the list of found devices.
- Once connected, the indicator light will flash blue slowly.
Image: Bluetooth 5.4 technology for stable connection.
4. Multipoint Connection
The W800BT SE headphones support connecting to two Bluetooth devices simultaneously.
- Pair the headphones with the first device (e.g., your smartphone) as described above.
- Disable Bluetooth on the first device. The headphones will re-enter pairing mode.
- Pair the headphones with the second device (e.g., your laptop).
- Re-enable Bluetooth on the first device. The headphones will automatically connect to both devices.
- To switch between devices, pause playback on the currently active device and start playback on the other. For calls, the headphones will automatically switch to the device receiving the call.
Image: Multipoint connection with phone and laptop.
Operating Instructions
Basic Controls
| Action | Button Press |
|---|---|
| Power On/Off | Press and hold Multi-function button (3s for On, 5s for Off) |
| Play/Pause Music | Single press Multi-function button |
| Answer/End Call | Single press Multi-function button |
| Reject Call | Double press Multi-function button |
| Volume Up | Single press Volume Up button |
| Volume Down | Single press Volume Down button |
| Next Track | Press and hold Volume Up button |
| Previous Track | Press and hold Volume Down button |
| Activate Voice Assistant | Triple press Multi-function button |
| Switch Mode (Music/Game/Theatre) | Single press Mode Switch button |
AI Call Noise Reduction
The integrated AI call noise reduction algorithm and high-sensitivity microphones work to filter out ambient noise, ensuring your voice is clear during phone calls.
Image: AI Call Noise Reduction in action.
Game Mode
Activate Game Mode for an ultra-low latency experience (0.06s), providing enhanced sound effects and perfect audio-visual synchronization for gaming.
Image: Low latency gaming experience.
Edifier ConneX App
Enhance your headphone experience by downloading the EDIFIER ConneX app. The app provides additional functions:
- Personalized control settings
- Preset EQ options
- Customizable EQ settings
- Schedule power off
- "Find Your Product" feature
Image: Edifier ConneX App interface.
Maintenance
- Keep the headphones dry. Do not expose them to extreme temperatures.
- Clean the headphones with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the headphones in a cool, dry place when not in use. The foldable design allows for compact storage.
- Avoid dropping or subjecting the headphones to strong impacts.
- Do not attempt to disassemble the headphones. This will void the warranty.
Troubleshooting
| Problem | Solution |
|---|---|
| Cannot power on headphones. | Ensure the headphones are charged. Connect to a power source using the USB-C cable. |
| Cannot pair with Bluetooth device. |
|
| No sound or low volume. |
|
| Sound quality is poor. |
|
| Calls are unclear. | Ensure the microphone is not obstructed. The AI Call Noise Reduction feature is active during calls. |
Specifications
- Model: W800BT SE
- Bluetooth Version: 5.4
- Bluetooth Profiles: A2DP, AVRCP, HFP
- Effective Distance: 10 meters
- Driver Unit: 40mm Dynamic Driver with Titanium-coated Diaphragm
- Frequency Response: Up to 20 kHz (Typical range is 20Hz-20kHz)
- Impedance: 32 Ohms
- Battery Life: Up to 45 hours (playback)
- Charging Port: USB Type-C
- Charging Time: Approximately 1.5 hours (full charge), 15 minutes for 8 hours playback
- Weight: Approximately 242g
- Dimensions: 3.35 x 3.15 x 3.35 inches (Product dimensions)
- Control Type: Button Control, App Control (Edifier ConneX)
- Special Features: AI Call Noise Reduction, Multipoint Connection, Low Latency Game Mode (0.06s), Lightweight, Foldable Design
Warranty and Support
Edifier products are designed for reliability and performance. For warranty information and technical support, please refer to the warranty card included in your package or visit the official Edifier website. Keep your purchase receipt as proof of purchase.
Official Edifier Website: www.edifier.com
Official Product Video
Video: Official product overview of the Edifier W800BT SE Wireless Over-Ear Bluetooth 5.4 Headphones, demonstrating key features and design.
