TUITA S10WM-01 Li-ion Battery Pack User Manual

1. Introduction and Overview

This manual provides essential information for the safe and effective use of your TUITA S10WM-01 Li-ion Battery Pack. This battery is designed as a replacement or spare for Tineco S10 and S10 ZT cordless vacuum cleaners.

The S10WM-01 battery pack features a 22.2V DC output with a capacity of 2500mAh (55.5Wh), ensuring reliable power for your cleaning tasks.

Image 1.1: Front and rear view of the TUITA S10WM-01 Li-ion Battery Pack in white.

2. Safety Information

Please read all safety instructions before using the battery pack to prevent injury or damage.

• Charger Compatibility: Use only with specified chargers: YLS0241A-T260060 or KL-WA260060-J. Using an incompatible charger may cause damage or fire.
• Certifications: This replacement lithium-ion battery meets FCC and ROHS certifications and standards.
• Built-in Protections: The battery includes built-in protections against over-charge, over-discharge, over-voltage, over-current, and over-heat to ensure safe operation.
• Storage: Store the battery in a cool, dry place away from direct sunlight, heat sources, and flammable materials.
• Disposal: Do not dispose of the battery in fire or water. Follow local regulations for proper recycling of Li-ion batteries.

3. Product Features

The TUITA S10WM-01 Li-ion Battery Pack offers the following features:

• High Capacity: 22.2V DC, 2500mAh (55.5Wh) for extended runtime.
• No Memory Effect: Lithium-ion technology ensures consistent performance without degradation from partial charges.
• LED Indicator: Equipped with an LED indicator to display battery status.
• Compatibility: Specifically designed for Tineco S10 and S10 ZT cordless vacuum cleaners.

Image 3.1: The TUITA S10WM-01 battery pack shown in various colors, indicating compatibility with Tineco S10/S10 ZT vacuum cleaners.

4. Setup and Installation

The TUITA S10WM-01 battery pack is designed for easy installation into compatible Tineco S10 and S10 ZT cordless vacuum cleaners.

1. Power Off: Ensure your Tineco vacuum cleaner is powered off and unplugged from any charging source before attempting battery replacement.
2. Locate Battery Compartment: Refer to your vacuum cleaner's original manual to locate the battery compartment and release mechanism.
3. Remove Old Battery: Press the battery release button (if present) and slide out the old battery pack.
4. Insert New Battery: Align the TUITA S10WM-01 battery pack with the slot in the vacuum cleaner. Slide it in firmly until it clicks into place. Ensure it is securely seated.
5. Initial Charge: It is recommended to fully charge the new battery before its first use.

Image 4.1: Examples of Tineco S10 and S10 ZT cordless vacuum cleaners, which are compatible with this battery pack.

5. Operation (Charging)

Proper charging is crucial for the longevity and performance of your Li-ion battery pack.

1. First Use: Fully charge the battery before its initial use.
2. Charging Time: A full charge typically takes approximately 4 to 4.5 hours.
3. Compatible Chargers: Always use the original Tineco charger or a compatible charger model YLS0241A-T260060 / KL-WA260060-J.
4. Charging Process: Connect the charger to the vacuum cleaner (with the battery installed) and plug it into a power outlet. The LED indicator on the battery or vacuum will show the charging status.
5. Avoid Overcharging: While the battery has over-charge protection, it is good practice to disconnect the charger once the battery is fully charged.

6. Maintenance

Follow these guidelines to maintain your battery pack:

• Regular Cleaning: Keep the battery contacts clean and free from dust or debris. Use a dry cloth to wipe them if necessary.
• Temperature: Avoid exposing the battery to extreme temperatures (hot or cold), as this can affect its performance and lifespan.
• Long-Term Storage: If storing the battery for an extended period, charge it to approximately 50-60% capacity and store it in a cool, dry place. Recharge it every 3-6 months to prevent deep discharge.
• Avoid Physical Damage: Do not drop, puncture, or disassemble the battery pack.

7. Troubleshooting

If you encounter issues with your battery pack, consider the following common solutions:

• Battery Not Charging:
  - Ensure the charger is correctly connected to both the vacuum and the power outlet.
  - Verify that you are using a compatible charger (YLS0241A-T260060 / KL-WA260060-J).
  - Check for any visible damage to the charger cable or battery contacts.
• Short Run Time:
  - Ensure the battery is fully charged before use.
  - Over time, all rechargeable batteries experience some capacity degradation. If the battery is old, it may be nearing the end of its lifespan.
• Vacuum Not Powering On:
  - Confirm the battery is securely installed in the vacuum cleaner.
  - Check if the battery has sufficient charge.

If problems persist, contact the seller or manufacturer for further assistance.

8. Specifications

Image 8.1: Detailed view of the battery label, confirming model, voltage, capacity, and compatible charger information.

9. Warranty and Support

For warranty information, please refer to the terms provided by your original point of purchase or contact the TUITA customer support directly. Keep your purchase receipt as proof of purchase.

For technical support or further inquiries, please reach out to the seller or manufacturer through the contact information provided at the time of purchase.