Introduction
The Wahl Self-Cut Pro Lithium-Ion Cordless Hair Cutting Kit is designed for convenient self-haircutting at home. It features a unique 15-degree blade angle and an ergonomic design for optimal DIY haircut performance. The versatile soft-touch grip allows for various hand-holding positions, ensuring comfort and control regardless of the cutting angle. This clipper offers both corded and cordless operation, powered by lithium-ion technology for extended runtime.
Image: Wahl Self-Haircut Pro Cordless Clipper with Included Guards.
What's Included
Your Wahl Self-Haircut Pro kit includes the following components:
- Wahl Self-Haircut Pro Lithium-Ion Cordless Hair Clipper
- 12 Snap-N-Lock™ Attachment Guards (ranging from 1/16” to 1”)
- Charging Cable (USB-A)
- Cleaning Brush
- Blade Oil
- Styling Comb
- Scissors
- Hard Storage Case
Image: All contents included in the Wahl Clipper Self-Haircut Pro kit.
Setup
Charging the Clipper
The clipper is powered by a lithium-ion battery, offering up to 2.5 hours of runtime on a full charge. It supports both corded and cordless operation.
- Connect the USB-A charging cable to the clipper and a compatible power source.
- The Smart LED indicator will flash red when the power level is low.
- During charging, the LED will turn a solid red.
- Once fully charged, the light will turn blue.
Image: Convenient USB-A charging for the Wahl Self-Haircut Pro.
Image: Smart Charge LED indicators showing battery status (flashing red for low, solid red for charging, blue for full).
Initial Blade Preparation
Before first use, it is recommended to oil the blades to ensure optimal performance and longevity.
- Apply a few drops of the included blade oil across the top of the blades.
- Turn on the clipper for a few seconds to allow the oil to distribute evenly.
- Wipe off any excess oil with a soft cloth.
Video: Official Wahl demonstration of the self clipper, showing its features and ease of use. (Duration: 0:30)
Operating Instructions
Ergonomic Design and Blade Angle
The Wahl Self-Haircut Pro features an optimized blade angle of 15 degrees, specifically designed for self-haircutting. This unique angle, combined with the versatile soft-touch grip, allows for comfortable and confident cutting from various hand positions, including the back of the head.
Image: A man demonstrating the use of the Wahl Self-Haircut Pro for a DIY haircut, highlighting its ergonomic design.
Image: Illustration of the DualGrip360 feature, showing no-slip soft grips on top and bottom for comfort and control.
Image: Comparison of the SmartCut™ 15-degree blade angle designed for self-cuts versus a standard clipper's angle.
Using Snap-N-Lock™ Attachment Guards
The kit includes 12 haircutting guide combs that easily attach to the blade for consistent and "goof-proof" haircuts. These guards range in size from 1/16” to 1”.
- Select the desired guard size based on your preferred hair length.
- Align the guard with the clipper blade and snap it securely into place.
- Begin cutting, moving the clipper against the direction of hair growth for an even trim.
Image: Close-up of the Snap-N-Lock™ attachment guards, highlighting their secure fit and easy length selection.
Video: Official Wahl "Self Clip 360" demonstration, showcasing the ergonomic grip and blade angle for easy self-haircutting. (Duration: 0:31)
Maintenance
Easy Clean Blades
The removable stainless steel self-sharpening blades make cleaning simple and efficient.
- To clean, carefully remove the blade assembly from the clipper.
- Rinse the blades under running water to remove any hair clippings.
- Ensure blades are completely dry before reattaching to the clipper.
- Regularly apply blade oil to maintain sharpness and smooth operation.
Image: Demonstration of rinsing the removable blades of the Wahl Self-Haircut Pro under running water for easy cleaning.
Troubleshooting
Clipper Not Charging or Low Power
- Symptom: Smart LED indicator is flashing red.
- Solution: This indicates a low battery. Plug the clipper into a power source using the provided USB-A cable. The light will turn solid red during charging and blue when fully charged.
- Symptom: Clipper does not turn on or hold a charge.
- Solution: Ensure the charging cable is securely connected to both the clipper and a working power outlet. Allow sufficient time for charging (up to 2.5 hours for a full charge). If issues persist, refer to the warranty information.
Specifications
| Feature | Detail |
|---|---|
| Brand | Wahl |
| Model Name | Self-Cut Pro |
| Item Model Number | 3026122 |
| UPC | 043917019079 |
| Power Source | Battery Powered (Corded/Cordless) |
| Blade Material | Stainless Steel |
| Unit Count | 1 Count |
| Package Dimensions | 11.06 x 7.44 x 3.39 inches |
| Item Weight | 1.68 Pounds |
| Country of Origin | China |
Safety Information
[General] Safety warnings apply, including cautions when handling blades, keeping the device away from water, and following recommended cleaning procedures.
WARNING: Always unplug the clipper before cleaning or performing maintenance. Keep out of reach of children.
Warranty and Support
For warranty information, product tutorials, or support, please refer to the official Wahl website or the contact information provided on your product packaging.
Wahl is a USA-based company committed to providing quality products and service. If you encounter any issues with your product, please reach out to them directly.
Note: We test our clippers for cutting performance prior to packaging with a hygienic fiber. We do our best to clean the product to remove any testing particles, but it is possible a few may remain. They are not hair and can be simply wiped off.