Introduction
This manual provides detailed instructions for the safe and effective use of your Aolulf CP69 AI Dog Training Collar. This system is designed to assist in training dogs weighing 10 to 120 lbs, offering beep, vibration, and safe shock modes to reinforce commands and correct undesirable behaviors. Please read this manual thoroughly before use to ensure proper operation and the well-being of your pet.
Safety Information
- Not for Aggressive Dogs: Do not use this product on aggressive dogs. If your dog is aggressive, consult a professional dog trainer.
- Collar Fit: Ensure the collar fits snugly but not too tightly. It should allow two fingers to fit between the strap and your dog's neck.
- Wear Duration: Do not leave the collar on your dog for more than 12 hours per day. Prolonged wear can cause skin irritation.
- Skin Monitoring: Regularly check your dog's neck for signs of irritation, redness, or sores. If irritation occurs, discontinue use and consult a veterinarian.
- Water Safety: While the collar is IPX7 waterproof, ensure the charging port is sealed before exposure to water.
- Supervision: Always supervise your dog during training sessions.
- Age and Weight: Suitable for dogs aged 6 months and older, weighing between 10 and 120 lbs.
Package Contents
Image: The package contents including the remote, two receiver collars, charging cable, silicone caps, contact points, hand strap, and test bulb.
- Handheld Remote Control
- Receiver Collar (x2)
- 2-in-1 Charging Cable
- Silicone Caps (x4)
- Short Contact Points (x2)
- Long Contact Points (x2)
- Hand Strap
- Test Bulb
- User Manual
Product Overview
Image: The Aolulf CP69 remote control and two receiver collars, showcasing their design and components.
Remote Control Features:
- Digital display for mode and level indication.
- Channel selection for training one or two dogs.
- Dedicated buttons for Beep, Vibration, and Shock modes.
- Keypad lock function to prevent accidental activation.
- Integrated flashlight for visibility in low light.
- Rotatable button for adjusting intensity levels.
Receiver Collar Features:
- Compact and lightweight design.
- IPX7 waterproof rating.
- Adjustable nylon strap (7 to 26 inches).
- Removable contact points for comfort.
- Battery indicator.
Setup
1. Charging the Devices
Image: The remote and receiver collar connected to a 2-in-1 charging cable, illustrating the charging process from various USB power sources.
- Connect the 2-in-1 charging cable to the charging ports on both the remote control and the receiver collar(s).
- Plug the USB end of the cable into a power adapter, computer, laptop, or power bank.
- Allow approximately 2 hours for a full charge. The battery indicator on the devices will show charging status.
- A full charge provides up to 35 days standby time for the collar and 45 days for the remote.
2. Turning On and Pairing
Image: A hand pressing the power button on the collar and an illustration of unlocking the remote control.
- Turn on the Receiver Collar: Press and hold the power button on the back of the receiver collar until the indicator light illuminates.
- Unlock the Remote Control: If the remote is locked, slide the security lock switch to the unlock position.
- The collar and remote are factory-paired. After turning on the receiver collar, it will automatically connect with the remote. The remote's screen will display the channel (1 or 2) corresponding to the collar.
3. Fitting the Collar and Contact Points
Image: Various dog breeds wearing the adjustable collar, with an illustration of how to trim and seal the excess collar strap.
Image: A detailed view of the ultra-soft silicone probe caps designed to prevent abrasion and protect the dog's skin.
Image: An illustration demonstrating how the metal probes can be removed from the collar receiver for improved comfort when the shock mode is not in use.
- Select the appropriate length of contact points (short or long) based on your dog's coat thickness. For dogs with thick fur, longer contact points may be necessary to ensure proper contact with the skin.
- Attach the silicone caps over the contact points to enhance comfort and prevent skin irritation.
- Place the receiver collar around your dog's neck. Ensure the contact points touch the skin.
- Adjust the strap so it is snug but not tight. You should be able to fit two fingers comfortably between the collar and your dog's neck.
- If the strap is too long, you can trim the excess and use a lighter to seal the frayed edge to prevent unraveling.
- For maximum comfort when the shock function is not needed, the metal probes can be removed.
Operating Instructions
1. Selecting a Training Mode and Adjusting Level
Image: The remote control display showing how to use the rotatable button to select between Beep, Vibration, and Shock modes, and then adjust their respective intensity levels.
- Click the rotatable button on the side of the remote to cycle through the training modes: Beep, Vibration, and Shock. The selected mode will be displayed on the screen.
- While the screen is flashing for the selected mode, rotate the button to adjust the intensity level:
- Vibration: Levels 1-9
- Safe Shock: Levels 1-18
- The Beep mode has a fixed intensity.
2. Initiating a Training Command
Image: A hand pressing the training mode button on the remote, indicating activation of the collar's function.
Once the desired mode and level are set, press the corresponding training mode button (Beep, Vibration, or Shock) on the remote to activate the collar and deliver the chosen stimulation to your dog.
3. Training Two Dogs
Image: A man training two dogs on a beach, demonstrating the remote's ability to control two collars simultaneously by selecting channel 1 or 2.
The remote control supports training two dogs simultaneously. Use the channel selection switch on the remote to toggle between Collar 1 and Collar 2. The active channel will be displayed on the remote's screen.
4. Flashlight Function
Image: A person walking a dog at night, with the remote control's flashlight providing illumination, comparing its brightness to a phone's flashlight.
The remote features a built-in flashlight. Press the flashlight button to activate it. This can be useful for nighttime walks or in low-light conditions.
Maintenance
- Cleaning: Hand wash the collar strap with mild soap and air dry. Wipe the remote and receiver with a damp cloth. Do not use harsh chemicals.
- Storage: Store the device in a cool, dry place when not in use.
- Battery Care: To prolong battery life, avoid fully discharging the devices frequently. Charge them regularly, especially if storing for extended periods.
- Contact Points: Periodically check the contact points for wear or damage. Replace if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not responding to remote | Low battery on collar or remote; devices not paired; remote locked; out of range. | Charge both devices. Ensure remote is unlocked. Check if the collar is turned on. Verify pairing (though factory-paired, re-pairing might be needed if issues persist). Move closer to the dog. |
| No stimulation (beep, vibration, or shock) | Incorrect mode/level selected; poor contact with dog's skin; contact points too short. | Adjust mode and level on the remote. Ensure collar is snug and contact points touch the skin. Use longer contact points if your dog has thick fur. Use the test bulb for shock function. |
| Collar not holding charge | Battery degradation; faulty charging cable or adapter. | Ensure charging cable and adapter are working correctly. If the issue persists, contact customer support. |
| Skin irritation on dog's neck | Collar worn too long; collar too tight; poor hygiene; allergic reaction. | Remove collar immediately. Clean the area. Ensure proper fit and do not leave on for more than 12 hours. Consult a veterinarian if irritation is severe or persists. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | CP69 |
| Training Modes | Beep, Vibration (1-9 levels), Safe Shock (1-18 levels) |
| Remote Range | Up to 3300 feet (1000 meters) |
| Waterproof Rating | IPX7 (Collar Receiver) |
| Dog Weight Range | 10 - 120 lbs |
| Collar Neck Size | 7 - 26 inches |
| Battery Type | Lithium Polymer (included) |
| Charging Time | Approx. 2 hours |
| Collar Standby Time | Up to 35 days |
| Remote Standby Time | Up to 45 days |
| Material | Nylon (Strap) |
| Item Weight | 13.7 ounces (total package) |
| Manufacturer | Shenzhen Cuter Pet Supply Co., LTD. |
Warranty and Support
This Aolulf CP69 Dog Training Collar comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For warranty claims, technical support, or any questions regarding the product, please contact Aolulf customer service. Refer to the contact information provided with your product packaging or visit the official Aolulf website for support details.