Introduction
Thank you for choosing the YOKE FELLOW Mini Nail UV Lamp. This compact and portable device is designed for efficient gel nail curing, featuring a flexible gooseneck, automatic sensor, and rechargeable battery. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance of your nail lamp.
Safety Information
Please read all safety warnings before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not look directly at UV light. Prolonged direct exposure to UV light can cause potential eye damage.
- Keep the device away from water or other liquids.
- Do not use the lamp if the power cord or plug is damaged.
- Keep out of reach of children.
- Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
Product Overview
The YOKE FELLOW Mini Nail UV Lamp is equipped with advanced features for convenient and effective gel nail curing.
The YOKE FELLOW Mini Nail UV Lamp features a flexible gooseneck and a compact base with an LCD display, designed for efficient and precise gel nail curing.
The lamp's flexible gooseneck allows for 360-degree adjustment, enabling precise positioning of the UV light for optimal curing angles.
Its lightweight and portable design makes the lamp easy to carry and store, ideal for both home use and travel.
Equipped with a 1500mAh rechargeable battery, the lamp offers 6-8 hours of working time after a 2-3 hour charge, allowing for cordless operation.
The Type-C charging port allows for versatile power supply options, including laptops, power banks, car chargers, and wall adapters.
The lamp utilizes 9 UV+LED dual light source beads, ensuring efficient and quick drying of various gel polishes without causing discomfort.
An infrared sensor enables automatic activation when a hand is placed within 5cm of the lamp, providing hands-free operation.
The lamp features a simple button operation with an LCD display showing battery level and timer settings (30s/60s).
Setup
Before first use, ensure the lamp is fully charged.
- Unpack: Carefully remove the nail lamp and all accessories from the packaging.
- Charge: Connect the provided Type-C cable to the charging port on the lamp's base and plug the other end into a suitable power source (e.g., wall adapter, laptop, power bank). The LCD display will indicate charging status.
- Full Charge: Allow 2-3 hours for a full charge. The lamp can be used while charging.
The lamp can be powered via various Type-C compatible sources.
Operating Instructions
Follow these steps for effective gel nail curing:
- Prepare Nails: After sanding, apply your desired gel polish or nail art adhesive to the nail piece.
- Power On/Timer Setting: Long press the power button on the lamp's base to turn it on. The default curing time is 30 seconds. Press the button once to switch to the 60-second timer setting. The LCD screen will display the selected time.
- Position Lamp: Adjust the flexible gooseneck to position the UV light directly over your nails. Ensure the lamp head is approximately 5cm away from your nails for optimal curing.
- Automatic Sensing: If the auto-sensing feature is desired, long press the button switch. The lamp will automatically turn on when your hand is placed within 5cm of the light and turn off when removed. This mode defaults to a 30-second curing cycle per activation.
- Curing: Place your fingers or toes under the UV light. The lamp will begin curing according to the selected timer or automatically via the sensor.
- Repeat: Repeat the process for additional coats of gel polish or for other nails as needed.
Easily switch between 30-second and 60-second timer settings with a single button press.
The infrared sensor activates the lamp automatically when your hand is detected within 5cm.
Position your nails under the lamp for efficient and even curing of gel polishes.
Maintenance
Proper care will extend the life of your YOKE FELLOW Mini Nail UV Lamp.
- Cleaning: Disconnect the lamp from the power source before cleaning. Use a soft, dry cloth to wipe the surface of the lamp. Do not use abrasive cleaners or solvents.
- Storage: Store the lamp in a cool, dry place away from direct sunlight and moisture when not in use.
- Battery Care: To maintain battery health, avoid completely draining the battery frequently. Charge the lamp regularly, even if not in constant use.
Troubleshooting
If you encounter issues with your lamp, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Low battery or not charged. | Charge the lamp fully using the Type-C cable. |
| Lamp turns off unexpectedly. | Battery is low. | Recharge the lamp. |
| Gel polish is not curing properly. | Incorrect curing time or distance. | Ensure proper distance (approx. 5cm) and sufficient curing time (30s/60s). Ensure the gel polish is compatible with UV/LED lamps. |
| Automatic sensor not working. | Hand not within sensing range or sensor obstructed. | Ensure your hand is within 5cm of the lamp head. Clean the sensor area if necessary. Long press the button to activate auto-sensing mode. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | YK-L201 |
| Product Dimensions | 3.4 x 3.4 x 4.72 inches |
| Item Weight | 0.23 Kilograms (8.15 ounces) |
| Material | Plastic |
| Color | White |
| Light Source | 9 UV+LED Dual Light Source Beads |
| Timer Settings | 30 seconds, 60 seconds |
| Battery Capacity | 1500mAh |
| Charging Time | 2-3 hours |
| Working Hours | 6-8 hours |
| Input Voltage | 5 volts DC |
| Manufacturer | YOKE FELLOW |
| Date First Available | August 18, 2024 |
Warranty and Customer Support
YOKE FELLOW is committed to providing high-quality products. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the product packaging or contact your retailer.
If you have any questions, concerns, or require technical assistance, please do not hesitate to contact our customer support team. We are dedicated to ensuring your satisfaction.
Contact Information: Please refer to the contact details provided on the product packaging or the official YOKE FELLOW website for the most up-to-date customer support information.