Funko Iron Man 3 Tony Stark Suit-Up GITD Pop! Vinyl Figure #1416 Instruction Manual

Introduction

This manual provides instructions for the Funko Pop! Vinyl Figure #1416, featuring Tony Stark in his Mark 42 suit from Iron Man 3. This collectible figure includes a glow-in-the-dark feature for its hand and chest piece. Please read these instructions carefully to ensure proper handling and display of your figure.

Setup

Your Funko Pop! figure comes in window-box packaging. To set up your figure:

1. Remove the figure from its window-box packaging.
2. Place the figure on a flat, stable surface for display.

Operating (Displaying the Figure)

The Tony Stark Suit-Up Pop! Vinyl Figure #1416 features glow-in-the-dark elements on its hand and chest piece. To activate the glow effect, expose these parts of the figure to a light source (such as natural sunlight or a bright lamp) for a period of time, then observe in a darkened environment. The intensity and duration of the glow will depend on the amount and type of light exposure.

Maintenance

To ensure the longevity and appearance of your Funko Pop! figure, follow these maintenance guidelines:

• Cleaning: Gently wipe the figure with a soft, dry cloth to remove dust. Avoid abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the paint or material.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity. Prolonged exposure to these conditions can cause discoloration, fading, or material degradation.
• Handling: Handle the figure by its base to avoid smudging or damaging painted details. Avoid dropping the figure or subjecting it to strong impacts.

Troubleshooting

This section addresses common inquiries regarding the Funko Pop! figure.

• Figure does not glow in the dark: Ensure the figure's glow-in-the-dark elements (hand and chest piece) have been exposed to sufficient light. The intensity and duration of the glow are directly related to the amount and type of light absorbed. Try exposing it to a brighter light source for a longer period.
• Figure does not stand upright: Some Funko Pop! figures may require careful positioning to stand stably. Ensure the figure is placed on a flat, level surface. If a clear plastic stand is included in the packaging, attach it to the figure's feet and the base for added stability. (Note: Not all figures include a stand.)

Specifications

Warranty and Support

For product inquiries or support regarding your Funko Pop! figure, please contact Funko directly through their official channels. Specific warranty information for collectible figures may vary and is typically covered under general consumer protection laws. You can find more information about Funko products and support on their official Amazon store page: Funko Amazon Store.