Homhedy CL70L
Homhedy Cat Litter Box Enclosure Instruction Manual
Model: CL70L
Introduction
Thank you for purchasing the Homhedy Cat Litter Box Enclosure. This furniture piece is designed to provide a private and comfortable space for your cat's litter box while seamlessly blending into your home decor. It can also serve as a stylish end table or pet house.
Safety Information
- Ensure all components are securely fastened before use.
- Do not expose the product to direct sunlight or place it in a damp environment to prevent damage.
- Keep small parts and packaging materials away from children and pets during assembly.
- Do not exceed the maximum static load capacity of the top (132 lb / 60 kg) or bottom (66 lb / 30 kg).
Package Contents
Please verify that all parts listed below are included in your package:
- 1 x Litter Box Enclosure
- 1 x Accessory Kit (includes necessary tools and hardware)
- 1 x Instructions Manual (this document)
Setup and Assembly
Assembly is straightforward and can typically be completed by one person in approximately 20-30 minutes. Follow the included instructions and use the provided accessory kit.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all parts from the package contents list are present.
- Assemble Frame: Attach the metal frame components using the provided screws and tools. Ensure all connections are tight and stable.
- Attach Side Panels: Secure the side panels to the frame. Note that the cat entrance can be positioned on either the left or right side during assembly to suit your preference.
- Install Bottom and Top Panels: Place the bottom panel securely within the frame, followed by the top panel.
- Attach Doors and Handles: Mount the cabinet doors and attach the gold-colored handles. Ensure the doors open and close smoothly.
- Final Check: Double-check all screws and connections to ensure the enclosure is stable and safe for your pet.

Figure 1: Product dimensions and recommended litter box sizes. The enclosure measures 28.3"L x 17.7"W x 21.7"H, providing ample space for most standard litter boxes.

Figure 2: The cat entrance can be configured on either the right or left side during assembly to best fit your space.
Operating Instructions
- Litter Box Placement: Open the cabinet doors and place your cat's litter box inside. The enclosure is designed to fit most standard litter boxes, up to 25.1"L x 16.1"W.
- Cat Access: Your cat can enter and exit the enclosure through the arched opening on the side.
- Multi-functional Use: The sturdy top surface can be used as an end table, coffee table, or a display area for plants and decorative items.

Figure 3: The spacious interior accommodates a standard litter box, providing a private space for your cat.

Figure 4: The arched side entrance allows easy access for your cat.
Maintenance
- Cleaning: The smooth surfaces of the enclosure are easy to wipe clean with a damp cloth. For deeper cleaning, use a mild, pet-safe cleaner.
- Litter Management: Regularly scoop the litter box inside the enclosure. The cabinet design helps contain litter scatter, making cleanup easier.
- Ventilation: While the enclosure provides privacy, ensure adequate ventilation in the room to minimize odors.

Figure 5: The enclosure helps prevent litter from scattering around your home, contributing to a cleaner environment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Enclosure feels wobbly/unstable. | Screws are loose or not fully tightened. | Check and tighten all screws and connections. Ensure the enclosure is on a flat, level surface. |
| Doors do not close properly. | Hinges are misaligned or loose. | Adjust hinge alignment and tighten hinge screws. |
| Strong odor from litter box. | Infrequent cleaning or poor ventilation. | Increase frequency of litter box cleaning. Ensure the room is well-ventilated. Consider using odor-absorbing products. |
Specifications
- Model Name: CL70L
- Product Dimensions: 28.3"L x 17.7"W x 21.7"H (72 x 45 x 55 cm)
- Item Weight: 26.4 lb (12 kg)
- Material: Particleboard, MDF, Metal
- Color: Green and Gold
- Max. Static Load Capacity (Top): 132 lb (60 kg)
- Max. Static Load Capacity (Bottom): 66 lb (30 kg)
- Style: Modern
- Specific Uses: Indoor
Warranty Information
This Homhedy product comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage caused by improper assembly, misuse, neglect, accidents, alterations, or normal wear and tear.
Customer Support
If you have any questions, concerns, or require assistance with your Homhedy Cat Litter Box Enclosure, please contact our customer support team:
- Email: support@homhedy.com
- Phone: 1-800-XXX-XXXX (Available Monday-Friday, 9 AM - 5 PM EST)
- Online: Visit the Homhedy Store on Amazon for FAQs and additional product information.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.