Sportspower Trampoline Enclosure Curved Upper Pole Model TR-0080-180 Instruction Manual

1. Introduction

Thank you for choosing the Sportspower Trampoline Enclosure Curved Upper Pole, Model TR-0080-180. This instruction manual provides important information for the proper installation, use, and maintenance of this OEM replacement part. This curved upper pole is designed to be part of a trampoline enclosure system. Please read this manual thoroughly before proceeding with installation or use.

Important Note: This product is a single curved upper pole section. A complete net pole typically consists of two sections. Foam padding is not included with this pole. If you are uncertain about which specific part you require, please contact Sportspower customer support for assistance.

2. Safety Information

Always prioritize safety during installation and use. Failure to follow these instructions may result in injury or damage to the product.

• Ensure all components are correctly assembled and securely fastened before use.
• Regularly inspect the trampoline and enclosure system for wear, damage, or loose parts.
• Replace damaged parts immediately with genuine OEM Sportspower components.
• Keep children and pets away from the assembly area during installation.
• Do not use the trampoline if any part of the enclosure system is damaged or missing.

3. Package Contents

Verify that all items listed below are present in your package. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• 1x Curved Upper Pole (Model TR-0080-180)

Note: Foam padding for the pole is not included and must be purchased separately if needed.

4. Setup and Installation

This section outlines the general steps for installing the curved upper pole. Specific installation may vary depending on your trampoline model. Refer to your trampoline's main instruction manual for detailed enclosure assembly instructions.

4.1 Identifying the Pole

The TR-0080-180 is a curved upper pole, designed to form the top section of the enclosure net support. It is characterized by its distinct curve. A typical trampoline enclosure requires six of these poles.

Image 1: The Sportspower Trampoline Enclosure Curved Upper Pole (Model TR-0080-180). This image shows the curved design of the pole, which is a key identifier for this specific replacement part.

4.2 Installation Steps

1. Prepare the Trampoline: Ensure the trampoline is stable and on a level surface. If replacing an existing pole, carefully remove the old pole section.
2. Connect Lower Pole (if applicable): If your enclosure system uses a two-part pole, connect the curved upper pole to the corresponding lower pole section. Ensure the connection is secure and all locking mechanisms (e.g., push-pins, screws) are engaged.
3. Attach to Trampoline Frame: Insert the assembled pole into the designated mounting bracket or sleeve on the trampoline frame. Secure it according to your trampoline's specific instructions, typically using bolts, clamps, or straps.
4. Attach Enclosure Net: Once the pole is securely in place, attach the enclosure net to the curved upper section. The net should slide over the pole or attach via loops/straps, ensuring it is taut and properly positioned.
5. Repeat for all Poles: Install all necessary curved upper poles around the trampoline perimeter.

Important: Do not use excessive force during installation. If parts do not fit, re-check your trampoline model and the pole model number.

5. Proper Use and Integration

This curved upper pole is an integral part of the trampoline enclosure system, designed to support the safety net. Proper integration ensures the safety and longevity of your trampoline.

• Ensure the enclosure net is always properly attached to the pole and taut to prevent gaps.
• Do not hang or swing from the enclosure poles or net.
• Regularly check the connection points between the upper and lower pole sections, and where the pole attaches to the trampoline frame.

6. Maintenance

Regular maintenance will extend the life of your trampoline enclosure pole and ensure continued safety.

• Inspection: Periodically inspect the pole for any signs of bending, cracks, rust, or other damage. Check all connection points for tightness.
• Cleaning: Clean the pole with a damp cloth and mild soap as needed. Avoid harsh chemicals that could damage the material.
• Replacement: If the pole shows significant signs of wear or damage, replace it immediately with a genuine Sportspower OEM part to maintain the structural integrity of the enclosure.
• Foam Padding: If foam padding is used on your enclosure poles, inspect it regularly for tears or deterioration. Replace foam padding as necessary to prevent injury.

7. Troubleshooting

This section addresses common issues you might encounter with the trampoline enclosure pole.

8. Specifications

9. Warranty and Support

For warranty information, product support, or to inquire about replacement parts not listed, please contact Sportspower customer service directly. Keep your purchase receipt as proof of purchase.

Sportspower Customer Service: Refer to the contact information provided with your original trampoline purchase or visit the official Sportspower website.

Return Policy: This item may be subject to the retailer's return policy, typically 30 days for refunds/replacements. Please check with your point of purchase for specific details.