SAVILER Red Light Therapy Lamp A0169 User Manual

1. Introduction

Thank you for choosing the SAVILER Red Light Therapy Lamp A0169. This device is designed to provide targeted red light and near-infrared light therapy for various applications, including skin care, muscle recovery, and general well-being. This manual provides essential information for safe and effective use of your device.

Image 1.1: The SAVILER Red Light Therapy Lamp A0169 in a home setting, demonstrating its use for both humans and pets.

2. Safety Information

Please read all safety instructions before using the device. Failure to follow these instructions may result in injury or device damage.

• Always wear the provided eye protection goggles during therapy sessions to protect your eyes from direct light exposure.
• Do not use the device on broken, irritated, or infected skin. Consult a healthcare professional if you have any concerns.
• Keep the device away from water or damp environments.
• Do not attempt to disassemble or modify the device. Refer all servicing to qualified personnel.
• Statements regarding dietary supplements and light therapy devices have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

3. Product Features

The SAVILER Red Light Therapy Lamp A0169 offers a range of features designed for optimal therapy sessions:

• Customizable Treatment Options: Choose from three distinct modes to target specific areas. The 660nm mode is ideal for promoting collagen production and enhancing skin elasticity. The 850nm mode penetrates deeper to assist with muscle recovery and pain relief. The combined 660nm + 850nm mode improves blood circulation.
• Full-body Multi-area Coverage: Equipped with four flexible lamp heads, this device provides comprehensive red light therapy. It is convenient and non-addictive, offering a safe method to address muscle and joint discomfort. Daily sessions of 15-30 minutes can contribute to firmer skin and reduced wrinkles.
• Adjustable Height and Angle: The lamp features a flexible gooseneck design for precise angle and direction adjustments. The height-adjustable tripod stand can be set from 23.62 to 55.12 inches, allowing for comfortable therapy positions for both facial and body applications.
• Multiple Timer and Brightness Settings: Customize your therapy with five brightness levels (L0, L1, L2, L3, L4) and various timer options (5, 10, 15, 20, 25, 30 minutes). The timer function ensures accurate session durations with an automatic shut-off after 30 minutes for safety. The timer can also be disabled for continuous use.
• Advanced LED Technology: The device is equipped with 200 pieces of 3-in-1 chip LEDs, totaling 600 chips. Each chip contains 2 LEDs of 660nm (visible red light) and 1 LED of 850nm (invisible near-infrared light), providing high brightness for effective treatment.

Image 3.1: Illustration of 660nm (surface) and 850nm (deep) light penetration into the skin.

Image 3.2: The flexible gooseneck design allows for 360-degree adjustment of the lamp panels, and the stand is height-adjustable from 23.62 to 55.12 inches.

4. Setup Instructions

Follow these steps to assemble and prepare your SAVILER Red Light Therapy Lamp for use:

1. Unpack Components: Carefully remove all items from the packaging. Verify that all parts listed in the Package Content section are present.
2. Assemble Tripod Stand: Open the tripod stand legs and adjust them for stability. Extend the stand to your desired height using the adjustable knobs.
3. Attach Lamp Head: Securely install the four-head lamp panel onto the top of the tripod stand. Ensure it is firmly attached.
4. Connect Power: Connect the power cable from the lamp head to the adapter, then plug the adapter into a power strip or wall outlet.
5. Adjust Angle: Once powered, adjust the flexible gooseneck arms to direct the light to your desired treatment area.

Image 4.1: Visual guide for the installation steps of the SAVILER Red Light Therapy Lamp.

Package Content:

• Red Light Therapy Lamp Panel with Controller x 1
• Tripod x 1
• Adapter x 1
• Eye Protection Goggle x 1

Image 4.2: All components included in the SAVILER Red Light Therapy Lamp package.

5. Operating Instructions

The device is controlled via an inline remote with a digital display. Ensure the device is properly set up and plugged in before operation.

1. Power On/Off: Press the power button on the remote to turn the device on or off.
2. Select Mode: Use the mode selection button to cycle through the available light modes: 660nm (Red Light), 850nm (Near-Infrared Light), or 660nm + 850nm (Combined).
3. Adjust Brightness: Use the brightness control buttons (L0-L4) to increase or decrease the light intensity to your comfort level.
4. Set Timer: Press the timer button to select a session duration (5, 10, 15, 20, 25, or 30 minutes). The device will automatically shut off after the selected time. You can also disable the timer for continuous use.
5. Positioning: Adjust the flexible gooseneck arms and stand height to ensure the light is directed at the desired treatment area, maintaining a comfortable distance.

Image 5.1: The remote control displaying intensity, timing, and mode change options.

Recommended Usage:

• For general use, start with 10-15 minute sessions, 3-5 times per week.
• Gradually increase session duration to 20-30 minutes as tolerated.
• Maintain a distance of 6-12 inches from the light panel to the skin.

6. Maintenance

To ensure the longevity and optimal performance of your device, follow these maintenance guidelines:

• Cleaning: Unplug the device before cleaning. Use a soft, dry cloth to wipe the lamp panels and stand. Do not use abrasive cleaners or solvents.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure it is clean and disassembled if necessary.
• Inspection: Periodically inspect the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.

7. Troubleshooting

If you encounter any issues with your device, refer to the following common troubleshooting tips:

• Device Not Turning On:
  • Ensure the power adapter is securely plugged into both the device and a working electrical outlet.
  • Check if the power outlet is functional by plugging in another appliance.
  • Verify that the power button on the inline remote is pressed.
• Lights Not Emitting Red/Near-Infrared:
  • Confirm the correct mode (660nm, 850nm, or combined) is selected on the remote. Note that 850nm near-infrared light is invisible to the naked eye.
  • Adjust the brightness level to ensure it's not set to the lowest intensity.
• Timer Not Working:
  • Ensure a specific time duration is selected. If "ALL" is displayed, the timer function is bypassed.

If the problem persists after troubleshooting, please contact customer support.

8. Specifications

9. Warranty & Support

For warranty information and customer support, please refer to the documentation included with your product or visit the official SAVILER website. You may also contact the seller directly through your purchase platform for assistance.