Introduction
This manual provides instructions for the installation, maintenance, and specifications of your CAN-MEAGEREN H13 True HEPA Replacement Filter. This filter is designed to maintain optimal air purification performance in compatible air purifier models.
Image: The CAN-MEAGEREN H13 True HEPA Replacement Filter, shown from a top-down perspective, highlighting its cylindrical shape and pleated filter material.
Compatibility
This replacement filter is compatible with the following air purifier models:
- Chuboor PJ-01 Air Purifier
- Chuboor PJ08 Purifier
- Shunrenfu ZHIBO C40 Air Purifier
Ensure your air purifier model matches one of the listed compatible devices before installation.
Features
The CAN-MEAGEREN H13 True HEPA Replacement Filter incorporates advanced filtration technology to improve air quality:
- H13 True HEPA Filtration: Captures 99.97% of airborne particles as small as 0.3 microns, including dust, pollen, pet dander, and smoke particles.
- 3-Stage Filtration System: Combines multiple layers for comprehensive air purification.
- Activated Carbon Layer: Effectively absorbs odors from cooking, pets, smoke, and volatile organic compounds (VOCs).
Image: A diagram illustrating the multi-stage filtration system, highlighting the H13 HEPA filter and the activated carbon filter layer, and their functions in purifying air and removing odors.
Installation (Setup)
Follow these steps to replace the filter in your compatible air purifier:
- Power Off: Unplug your air purifier from the power outlet before beginning the filter replacement process.
- Access Filter Compartment: Refer to your air purifier's original manual for specific instructions on how to open the filter compartment. This usually involves removing a cover or twisting the base.
- Remove Old Filter: Carefully remove the used filter. Dispose of it according to local regulations.
- Unpack New Filter: Remove the new CAN-MEAGEREN replacement filter from its protective packaging.
- Insert New Filter: Place the new filter into the compartment, ensuring it is seated correctly. Pay attention to any directional arrows or guides on the filter or in the air purifier.
- Close Compartment: Securely close the filter compartment cover.
- Restore Power: Plug the air purifier back into the power outlet.
- Reset Filter Indicator (if applicable): If your air purifier has a filter replacement indicator light, follow its specific instructions to reset it. This often involves pressing and holding a button for a few seconds.
Image: A side view of the CAN-MEAGEREN H13 True HEPA Replacement Filter, showing the cylindrical structure and the black activated carbon layer at the top and bottom edges.
Operating
Once the new filter is installed, your air purifier will operate as usual, providing improved air quality. The filter functions passively to capture pollutants as air passes through it. No specific operational steps are required for the filter itself beyond proper installation.
Image: An air purifier operating in a living room setting, with the replacement filter shown separately, illustrating the filter's role in maintaining clean indoor air.
Maintenance
Regular filter replacement is essential for maintaining the efficiency and performance of your air purifier.
- Replacement Frequency: It is recommended to replace the filter every 6 months.
- Environmental Factors: The actual lifespan of the filter may vary depending on the air quality in your environment, usage frequency of the air purifier, and the presence of pets or smokers. In environments with higher pollution levels, more frequent replacement may be necessary.
- Filter Indicator: Pay attention to your air purifier's filter replacement indicator light, if available.
Do not wash or reuse the filter. The filtration media is designed for single-use and its effectiveness will be compromised if cleaned with water or other methods.
Troubleshooting
If you experience issues after replacing your filter, consider the following:
- Poor Air Quality:
- Ensure the filter is installed correctly and seated firmly in its compartment.
- Verify that the filter compartment cover is securely closed.
- Check if the filter replacement indicator light (if present) has been reset.
- Consider if the filter needs more frequent replacement due to environmental conditions.
- Unusual Noise:
- Confirm the filter is properly seated and not obstructing any moving parts within the air purifier.
- Ensure the air purifier's cover is fully closed and latched.
For issues unrelated to the filter, refer to your air purifier's original instruction manual.
Specifications
| Brand | CAN-MEAGEREN |
| Model | Hepa (Compatible with PJ-01, PJ08, ZHIBO C40) |
| Filtration Type | H13 True HEPA, 3-stage with Activated Carbon |
| MERV Rating | 16 |
| Product Dimensions (L x W x Th) | 7" x 5.5" x 5.5" (17.78 cm x 13.97 cm x 13.97 cm) |
| Item Weight | 8 ounces (approx. 227 grams) |
| Number of Items | 2 (2-Pack) |
| Recommended Replacement | Every 6 months (varies by usage and environment) |
Warranty and Support
Warranty: This product comes with a 7-day warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for any warranty claims.
Customer Support: For any questions regarding the installation, compatibility, or performance of your CAN-MEAGEREN replacement filter, please contact your retailer or the manufacturer's customer service. Refer to your purchase documentation for contact details.