SKIOVEMI 3D VR Head Mounted Digital Infrared Night Vision Goggles (Model B0D9G947NF) User Manual

1. Introduction

Thank you for choosing the SKIOVEMI 3D VR Head Mounted Digital Infrared Night Vision Goggles. This device is designed to provide enhanced visual capabilities in various lighting conditions, from bright daylight to complete darkness. It features advanced 3D imaging, high-resolution recording, and versatile display options for a wide range of applications.

Please read this manual thoroughly before using the device to ensure proper operation and to maximize its performance and lifespan.

2. Safety Information

To prevent damage to the device or injury to yourself or others, please observe the following safety precautions:

• Do not look directly at strong light sources (e.g., the sun, lasers) through the device, as this can cause permanent eye damage and damage to the device's sensor.
• Keep the device away from extreme temperatures, humidity, and dust.
• Do not attempt to disassemble or repair the device yourself. Contact qualified service personnel for any repairs.
• Ensure the device is securely mounted when using the head strap or helmet mount to prevent accidental drops.
• Use only the specified charging cable and power adapter to charge the device.
• Dispose of batteries according to local regulations.

3. Package Contents

Verify that all items are present in your package:

• SKIOVEMI 3D VR Night Vision Goggles
• Head Strap Holder
• USB Type-C Charging Cable
• 2 x 32GB TF Cards
• User Manual
• Cleaning Cloth

4. Product Overview

Familiarize yourself with the components and controls of your night vision goggles.

Image 4.1: Labeled diagram of the SKIOVEMI 3D VR Night Vision Goggles, showing various buttons, ports, and lenses.

Components and Controls:

1. Up Button: Navigates menus upwards or increases values.
2. Left/Clear Screen Button: Navigates left or clears the display.
3. OK Button: Confirms selections.
4. Helmet Bracket Fixing Screw: For attaching to helmet mounts.
5. IR Up/Zoom In Button: Increases infrared brightness or zooms in.
6. Power Indicator Light: Shows device power status.
7. IR Down/Zoom Out Button: Decreases infrared brightness or zooms out.
8. Rope Hole: For attaching a lanyard or wrist strap.
9. Eyepiece Diopter Adjusting Wheel: Adjusts focus for individual eye vision.
10. View Area/Display Screen: The internal display for viewing.
11. Right/Shortcut Delete Button: Navigates right or deletes files.
12. Down Button: Navigates menus downwards or decreases values.
13. EN/Effects Button: Toggles between different viewing effects.
14. Menu Button: Accesses the main menu.
15. Shot Button: Captures photos or starts/stops video recording.
16. Power/Mode Button: Turns the device on/off or switches operating modes.
17. Bracket Fixing Screw: Additional screw point for mounting.
18. Speaker: Audio output.
19. USB Port/Micro SD Card Slot Cover: Protects the charging port and memory card slots.
20. Mic Hole: Microphone for audio recording.
21. Screensaver Distance Sensor: Automatically turns off display when not in use.
22. Lens: Objective lenses for image capture.
23. Infrared Light Transmitter: Emits infrared light for night vision.

5. Setup

5.1 Charging the Device

The device comes with a built-in 3000mAh lithium battery. Before first use, fully charge the device.

1. Open the USB Port/Micro SD Card Slot Cover.
2. Connect the supplied USB Type-C cable to the device's USB port and the other end to a compatible USB power adapter (not included) or computer.
3. The Power Indicator Light will show charging status. Once fully charged, disconnect the cable.

5.2 Inserting TF Cards

The device supports dual TF card slots, each up to 64GB. Two 32GB cards are included.

1. Open the USB Port/Micro SD Card Slot Cover.
2. Insert the TF cards into the slots with the gold contacts facing down until they click into place.
3. Close the cover to protect the ports.

5.3 Attaching the Head Strap or Helmet Mount

The device can be used handheld, with the included head strap, or mounted on a professional helmet.

Image 5.1: Various wearing methods for the night vision goggles, including helmet and head strap options.

• Head Strap: Attach the device to the head strap holder using the Helmet Bracket Fixing Screw. Adjust the straps for a comfortable and secure fit.
• Helmet Mount: Secure the device to a compatible helmet mount using the provided fixing screws. Ensure it is stable before use.

6. Operating Instructions

6.1 Power On/Off and Mode Selection

1. Power On: Press and hold the Power/Mode Button until the display turns on.
2. Mode Selection: Briefly press the Power/Mode Button to cycle through available modes (e.g., Photo, Video, Playback).
3. Power Off: Press and hold the Power/Mode Button until the display turns off.

6.2 Adjusting Focus and Diopter

For clear viewing, adjust the focus and diopter settings:

• Rotate the Eyepiece Diopter Adjusting Wheel for each eyepiece independently until the image appears sharp for your vision. The device has a 400 diopter adjustment range.

Image 6.2: Adjusting the eyepiece diopter for personalized focus, suitable for various vision needs.

6.3 Using Digital Zoom

The device features up to 6x digital zoom.

• Press the IR Up/Zoom In Button to zoom in.
• Press the IR Down/Zoom Out Button to zoom out.

Image 6.3: Visual representation of the 6X digital zoom feature, showing progressive magnification.

6.4 Infrared (IR) Adjustment for Night Vision

The device uses a 3W, 850nm infrared spotlight with 7 brightness levels for enhanced night vision up to 150 meters.

• In low light or darkness, press the IR Up/Zoom In Button to increase IR brightness.
• Press the IR Down/Zoom Out Button to decrease IR brightness.
• Adjust the IR level to achieve optimal clarity without overexposure.

Image 6.4: Comparison of night vision clarity with and without infrared illumination, showing the effect of 7 IR adjustment levels.

6.5 Capturing Photos and Videos

The device supports high-resolution photo (up to 8064x3024) and video (up to 3840x1080) recording.

• Switch to Photo or Video mode using the Power/Mode Button.
• Press the Shot Button once to take a photo.
• In Video mode, press the Shot Button to start recording, and press again to stop.
• Photos and videos are saved to the inserted TF cards.

6.6 3D Photo and Video Stitching

The device captures separate left and right images/videos for 3D viewing. These can be merged using dedicated software.

• Transfer the captured left and right image/video files to a computer.
• Use the provided "Merge Tools" software (or compatible 3D stitching software) to combine the files into a single 3D viewable format.
• The resulting 3D content can be viewed on compatible 3D displays or devices.

Image 6.6: Explanation of how 3D photos and videos are stitched together from left and right captures for a stereoscopic effect.

6.7 Menu Navigation and Settings

Access the menu to adjust various settings:

1. Press the Menu Button to enter the main menu.
2. Use the Up Button and Down Button to navigate through menu options.
3. Press the OK Button to select an option or confirm a setting.
4. Use the Left/Clear Screen Button or Right/Shortcut Delete Button to adjust values or navigate sub-menus.
5. Common settings include:
   • Brightness: Adjust the 7 levels of display brightness.
   • Language: Select your preferred language.
   • Auto Power-Off: Set the time for automatic shutdown to save battery.
   • Date/Time Stamp: Enable or disable date and time stamps on photos and videos.
   • Frame Rate: Choose between Auto/5-30FPS for video recording.

7. Maintenance

7.1 Cleaning

• Use the provided cleaning cloth to gently wipe the lenses and display screen.
• For stubborn smudges, use a lens cleaning solution specifically designed for optics.
• Wipe the exterior of the device with a soft, damp cloth. Do not use abrasive cleaners or solvents.

7.2 Storage

• When not in use, store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Ensure the lens caps are on to protect the lenses from dust and scratches.
• If storing for an extended period, charge the battery periodically to maintain its health.

7.3 Water Resistance

The device has an IP54 waterproof rating, meaning it is protected from dust and splashing water from any direction. It is not designed for submersion.

8. Troubleshooting

If the problem persists after trying these solutions, please contact customer support.

9. Specifications

• Model: B0D9G947NF
• Dimensions: Approximately 126 x 125 x 58 mm (4.96 x 4.92 x 2.28 inches)
• Weight: Approximately 1.16 kg (2.55 pounds)
• Photo Resolution: Up to 8064x3024
• Video Resolution: Up to 3840x1080
• Digital Zoom: 6x
• Infrared Illuminator: 3W, 850nm, 7 levels adjustable
• Night Vision Range: Up to 150 meters (in complete darkness)
• Display: Built-in screen (equivalent to 100-inch TV at 2.5m), 7 brightness levels
• Diopter Adjustment: +/- 400 range
• Storage: Dual TF card slots, supports up to 64GB each (2x 32GB cards included)
• Battery: Built-in 3000mAh Lithium Battery (rechargeable)
• Charging Interface: USB Type-C
• Waterproof Rating: IP54
• Operating Temperature: -20°C to +50°C

10. Warranty and Support

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official SKIOVEMI website. Keep your proof of purchase for warranty claims.

Manufacturer: SKIOVEMI