1. Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Brook Auto Catch ND device. Please read this manual thoroughly to ensure proper use and to maximize your device's functionality.
Image 1.1: The Brook Auto Catch ND device and its retail packaging.
2. Setup
2.1. Package Contents
Verify that all items are present in your package:
- Brook Auto Catch ND Device (x1)
- Wrist Strap (x1)
- Thanks Card (x1)
2.2. Battery Installation
The Brook Auto Catch ND requires two (2) AAA batteries (not included) for operation. Follow these steps to install the batteries:
- Locate the battery compartment cover on the back of the device.
- Gently slide or unclip the cover to open the compartment.
- Insert two AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the battery compartment cover, ensuring it is securely closed.
2.3. Device Overview and Initial Configuration
Before connecting, familiarize yourself with the device's switches and buttons:
- Power/Mode Switch: Located on the side, this switch allows you to turn the device OFF, or select between Android and iOS modes. Ensure this is set correctly for your mobile device.
- Control Buttons: The central 'B' button and directional arrows are used for navigation and interaction, particularly with the HyperTap feature.
2.4. Connecting to Your Mobile Device
The Brook Auto Catch ND features Smart Auto-Connect for simplified pairing. Follow these general steps:
- Ensure your mobile device's Bluetooth is enabled.
- Set the Auto Catch ND's Power/Mode switch to either 'Android' or 'iOS' depending on your phone.
- Open the relevant game application on your phone.
- Within the game settings, navigate to the accessory connection menu.
- Select the Brook Auto Catch ND from the list of available devices to initiate pairing.
- Once connected, the device will attempt to maintain a connection automatically.
Image 2.1: Key features of the Brook Auto Catch ND, including QuickConnect, SmartConnect, and HyperTap.
3. Operating Instructions
3.1. Automatic Catching and Spinning
Once successfully connected, the Brook Auto Catch ND will automatically perform the following actions:
- Spin PokéStops: The device will automatically spin nearby PokéStops, collecting items. This action can occur in approximately 1 second.
- Catch Pocket Monsters: The device will attempt to catch nearby Pocket Monsters. This process typically takes under 5 seconds.
This hands-free functionality allows for continuous gameplay without direct screen interaction.
Image 3.1: The SmartConnect feature ensures continuous interaction with the game.
Image 3.2: Illustration of swift catching and speedy spinning capabilities.
3.2. HyperTap Technology
The HyperTap feature is designed to enhance battle efficiency by simulating rapid screen taps. This can be particularly useful in certain game scenarios requiring quick input.
- Activation: Refer to the specific instructions provided with the device or on the manufacturer's website for HyperTap activation and configuration, as it may involve accessibility settings on your mobile device.
- Functionality: Once configured, the device can simulate screen taps at a high rate (up to 8 times per second) at a designated screen location.
- Cursor Control: The directional buttons on the Auto Catch ND can be used to move a cursor on your phone screen to position the HyperTap location. Note that while in HyperTap mode, direct touch input on your phone screen may be disabled, requiring you to use the device's buttons for navigation.
Image 3.3: HyperTap technology for elevating battle efficiency.
3.3. TapSwitch for Charged Attacks
The TapSwitch function allows for quick execution of pre-set charged attacks in battles. By using a specific combination of keys on the Auto Catch ND, the device can instantly shift the tap coordinates to the required position on the screen.
Image 3.4: TapSwitch functionality for quickly using charged attacks.
3.4. Dual Phone Connectivity
The Brook Auto Catch ND supports connection to two mobile devices simultaneously. Refer to the manufacturer's detailed instructions for configuring dual device connections, as this may involve specific pairing sequences or application settings.
3.5. Portability
The device is designed to be ultra-light and compact, smaller than an average palm. It can be easily attached to a keychain or stored in a pocket, enhancing convenience and freedom of movement.
Image 3.5: The Grip-and-Go design with an adjustable wrist strap for easy portability.
4. Maintenance
4.1. Battery Replacement
The Brook Auto Catch ND is designed for extended use, offering up to 185 hours of battery life. When the device's indicator light suggests low battery or performance degrades, replace the two AAA batteries by following the installation steps in Section 2.2.
Image 4.1: The device offers up to 185 hours of battery endurance.
4.2. Cleaning
To clean your device, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the device's surface or internal components.
5. Troubleshooting
If you encounter issues with your Brook Auto Catch ND, refer to the following common problems and solutions:
5.1. Connection Issues
- Device not connecting: Ensure Bluetooth is active on your phone and the device's mode switch is set correctly (Android/iOS). Try restarting both the Auto Catch ND and your phone's Bluetooth.
- Frequent disconnections: Verify that the game application has unrestricted battery usage permissions on your phone. Some phone settings may aggressively close background apps, affecting connection stability.
- Difficulty pairing: If initial pairing is challenging, consult the official Brook support resources or video tutorials for specific pairing sequences for your phone model.
5.2. HyperTap Functionality Problems
- HyperTap not working: Ensure all necessary accessibility settings on your mobile device are correctly configured as per Brook's instructions.
- Screen unclickable during HyperTap: This is expected behavior. When HyperTap is active and controlling a cursor, your phone's touch screen input is typically disabled. Use the Auto Catch ND's directional buttons to move the cursor.
5.3. Auto-Catch/Spin Performance
- Spotty auto-catch/spin: Ensure the device is within effective Bluetooth range of your phone. Check for any in-game settings that might interfere with accessory functionality.
5.4. Compatibility
- Foldable Phones: Some users have reported connection issues or unexpected behavior when using the device with foldable phones, particularly when switching between screens. Compatibility may vary.
6. Specifications
| Model | Auto Catch ND |
| Manufacturer | Brook |
| Dimensions | 5.31 x 3.82 x 1.22 inches (Package) |
| Item Weight | 2.89 ounces |
| Form Factor | Handheld |
| Color | Purple |
| Connectivity | Wireless (Bluetooth) |
| Battery Type | 2 x AAA batteries (not included) |
| Estimated Battery Life | Up to 185 hours |
7. Warranty and Support
7.1. Warranty Information
For detailed warranty information regarding your Brook Auto Catch ND, please refer to the official Brook website or the documentation included with your purchase. Warranty terms and conditions may vary by region and retailer.
7.2. Customer Support
If you require further assistance, technical support, or have questions not covered in this manual, please visit the official Brook support website or contact their customer service department. Contact information can typically be found on the manufacturer's website.
