RONEGN Portable Charger User Manual

1. Introduction

Thank you for choosing the RONEGN Portable Charger. This device is designed to provide convenient and fast charging for your electronic devices on the go. Featuring a 10000mAh battery capacity, built-in cables, and multiple output/input options, it is an essential companion for travel and daily use. Please read this manual carefully before using the product to ensure safe and optimal performance.

2. Safety Information

To prevent injury or damage to your device, please observe the following safety precautions:

• Do not expose the power bank to extreme temperatures (above 60°C/140°F or below 0°C/32°F), direct sunlight, or fire.
• Do not immerse the power bank in water or other liquids.
• Do not disassemble, open, or attempt to repair the power bank yourself. This will void the warranty and may cause harm.
• Keep out of reach of children.
• Use only original or certified cables for charging the power bank and your devices.
• Avoid dropping or subjecting the power bank to strong impacts.
• If the power bank swells, emits an odor, or becomes excessively hot, discontinue use immediately and contact customer support.
• Dispose of the power bank according to local regulations. Do not dispose of it with household waste.

3. Package Contents

• RONEGN Portable Charger (Model: PA100)
• User Manual

(Note: Charging cable for the power bank itself is typically integrated or not included, as it has multiple input options.)

4. Product Overview

Familiarize yourself with the components of your RONEGN Portable Charger.

Figure 4.1: RONEGN Portable Charger (White) with built-in cables and digital LED display showing 100% charge.

Figure 4.2: Illustration of the four built-in charging cables: Lightning, USB Type-C, Micro USB, and USB-A. These cables are integrated into the power bank for convenience.

Figure 4.3: Overview of the power bank's 5 output options (Built-in iOS, Built-in Type-C, Built-in Micro USB, USB-A Port, USB-C Port) and 3 input options (USB-C Port, Built-in USB-C Cable, Built-in USB-A Cable) for versatile charging and recharging.

Key Features:

• Built-in Cables: Includes integrated iOS (Lightning), Type-C, USB, and Micro USB cables for direct device charging.
• Multiple Outputs: Supports charging up to 5 devices simultaneously.
• Multiple Inputs: Can be recharged via USB-C port, built-in USB-C cable, or built-in USB-A cable.
• Fast Charging: USB-C (22.5W) and iOS (20W) output cables support QC4.0 & QC4.0 fast charge technologies.
• LED Digital Display: Shows remaining battery percentage.
• Compact Design: Slim and lightweight, suitable for travel.
• Safety Protection: Built-in intelligent power management IC protects against overcharge, overvoltage, overcurrent, short circuit, and overtemperature.

5. Setup

Initial Charge:

Before first use, it is recommended to fully charge your RONEGN Portable Charger. The LED display will show the charging progress.

1. Connect the power bank to a power source using one of its built-in input cables (USB-C or USB-A) or via the dedicated USB-C input port.
2. The LED display will illuminate and show the battery percentage increasing.
3. Once the display shows "100%", the power bank is fully charged and ready for use.

Figure 5.1: The power bank can be recharged using its dedicated USB-C input port, or by utilizing its built-in USB-C or USB-A cables connected to a power adapter.

6. Operating Instructions

Charging Your Devices:

The RONEGN Portable Charger offers multiple ways to charge your electronic devices.

1. Using Built-in Cables:
   • Identify the correct built-in cable for your device (iOS/Lightning, Type-C, or Micro USB).
   • Pull out the desired cable from its storage slot on the power bank.
   • Connect the cable to your device's charging port.
   • Charging will begin automatically. The power bank's LED display will show the remaining battery.
2. Using External USB Cables (via USB-A or USB-C Output Ports):
   • Connect your device's charging cable (USB-A or USB-C end) to the corresponding output port on the power bank.
   • Connect the other end of your cable to your device.
   • Charging will commence.

You can charge up to 5 devices simultaneously using a combination of the built-in cables and external USB ports.

Figure 6.1: The RONEGN Portable Charger can charge up to five devices concurrently, including smartphones, tablets, and wireless earbuds, using its various built-in cables and output ports.

Checking Battery Level:

The digital LED display on the power bank shows the precise remaining battery percentage. Simply turn on the power bank (if it's off) or connect a device to see the current charge level.

7. Maintenance

• Cleaning: Wipe the power bank with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge it to about 50-70% every 3 months to prolong battery life.
• Cable Care: Ensure the built-in cables are properly retracted into their slots when not in use to prevent damage. Avoid excessive bending or pulling.

8. Troubleshooting

9. Specifications

10. Warranty and Support

RONEGN provides a comprehensive care plan for its products to ensure customer satisfaction.

• 30-Day Exchange: If you encounter any issues within 30 days of purchase, you are eligible for an exchange.
• 24-Month Care Plan: The product is covered by a 24-month care plan for manufacturing defects.
• Customer Support: For any questions, concerns, or technical assistance, please contact RONEGN customer support. We aim to reply within 24 hours, 7 days a week.

For support, please refer to the contact information provided on the product packaging or the official RONEGN website.