1. Introduction
Thank you for choosing the Meilocar Wood Lift Top Coffee Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new coffee table. Please read these instructions carefully before beginning assembly and retain them for future reference.
This coffee table features a convenient lift-top mechanism, revealing a hidden storage compartment, and is designed for use in living rooms or reception areas.
2. Safety Information
WARNING:
- Keep fingers away from the lift-top mechanism to prevent injury.
- Do not exceed the maximum weight recommendation of 85 pounds on the tabletop when not lifted.
- Assemble according to these instructions to ensure stability and prevent tipping.
- Always use the table on a flat, stable surface.
- Keep small parts and packaging materials away from children and pets.
3. Package Contents
Before assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
- All necessary furniture panels (e.g., tabletop, side panels, base, legs)
- Hardware kit (screws, bolts, cam locks, dowels, hydraulic lifters)
- Installation Tool (e.g., Allen wrench)
- Assembly Instructions (this manual)
4. Setup and Assembly
Assembly typically requires two people. Follow the steps below carefully. It is recommended to assemble the table on a soft, clean surface to prevent scratches.
4.1 Preparation
- Clear a spacious area for assembly.
- Lay out all components and hardware, matching them against the parts list (if provided separately).
- Ensure you have the included installation tool and any additional tools required (e.g., screwdriver, hammer).
4.2 Assembly Steps
The following images illustrate the general assembly process. Refer to the detailed diagrams included with your product for specific part identification and orientation.
Image: Overview of the assembly process, showing four main stages from base construction to attaching the lift-top mechanism and tabletop.
- Assemble the Base Frame: Connect the side panels and internal dividers to form the main storage compartment structure. Ensure all cam locks and dowels are securely fastened.
- Attach the Legs: Securely fasten the four wooden legs to the bottom of the assembled base frame. Ensure they are oriented correctly for stability.
- Install the Lift Mechanism: Attach the hydraulic lift mechanisms to the internal frame and the underside of the tabletop. Pay close attention to the orientation of these components as incorrect installation can affect smooth operation. Note: Some users have found this step challenging; ensure the metal pieces face the correct way.
- Attach the Tabletop: Carefully align and attach the tabletop to the lift mechanisms. This step often requires two people to ensure proper alignment and prevent damage.
After assembly, gently test the lift mechanism to ensure it operates smoothly and quietly.
5. Operating Instructions
Your Meilocar coffee table features a hydraulic lift-top mechanism for convenient access to hidden storage and an elevated surface.
5.1 Lifting the Tabletop
- To lift the tabletop, grasp the edge of the tabletop and gently pull upwards. The hydraulic lifters will assist in a smooth and quiet ascent.
- The tabletop can be lifted to a maximum height of approximately 18.3 inches from its closed position.
- Ensure no objects are obstructing the lift mechanism or the hidden compartment when lifting.
5.2 Lowering the Tabletop
- To lower the tabletop, gently push downwards on the tabletop. The hydraulic lifters will control the descent, ensuring it closes smoothly and quietly.
- Keep fingers clear of pinch points during lowering. Foam bumpers are installed to help prevent noise and pinching.
5.3 Using the Hidden Storage Compartment
- Once the tabletop is lifted, the spacious 6.3-inch deep hidden storage compartment becomes accessible.
- This area is suitable for storing books, remote controls, laptops, and other living room essentials.
- Avoid placing excessively heavy or sharp objects in the compartment that could damage the table's interior.
Image: The Meilocar coffee table with its top lifted, revealing a spacious hidden compartment filled with books and a basket. A laptop is on the elevated tabletop.
6. Maintenance
Proper care will extend the life and appearance of your coffee table.
- Cleaning: Wipe the table surfaces with a dry or damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Clean spills immediately with a soft, dry cloth to prevent staining.
- Hardware: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary to maintain stability.
- Environment: Avoid placing the table in direct sunlight or near heat sources, as this can cause warping or fading. Maintain a stable room temperature and humidity.
7. Troubleshooting
If you encounter any issues with your coffee table, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Tabletop does not lift smoothly or is noisy. | Lift mechanism incorrectly installed or damaged. | Review assembly instructions for the lift mechanism. Ensure all parts are correctly oriented and secured. If damaged, contact customer support. |
| Table feels wobbly or unstable. | Loose fasteners or incorrect assembly of legs/frame. | Check all screws, bolts, and cam locks. Tighten any loose connections. Ensure legs are fully seated and correctly attached. |
| Visible damage or defects. | Manufacturing defect or shipping damage. | If damage was present upon unboxing, contact customer support immediately with photos of the damage. |
| Difficulty with assembly. | Complex steps or unclear instructions. | Ensure you have a second person for assistance, especially for attaching the tabletop. Carefully re-read the specific step causing difficulty. Contact customer support if you remain stuck. |
8. Specifications
Key technical details for the Meilocar SHX10055-WAL Wood Lift Top Coffee Table:
- Model Name: Coffee Table
- Model Number: SHX10055-WAL
- Brand: Meilocar
- Color: Walnut
- Material: Engineered Wood
- Product Dimensions (Closed): 21.65"D x 39.4"W x 15.9"H
- Maximum Lifting Height: 18.3 Inches (from closed height)
- Hidden Storage Depth: 6.3 Inches
- Maximum Weight Recommendation (Tabletop, not lifted): 85 Pounds
- Item Weight: 48.4 Pounds
- Recommended Number of People for Assembly: 2
- Frame Joint Type: Cam Lock or Dowel/Plug
- Environmental Compliance: Meets CARB Phase 2 and TSCA Title VI
Image: Detailed product dimensions including length (39.4"), depth (21.65"), closed height (15.9"), and internal storage depth (6.3").
Image: Graphic indicating the product meets CARB Phase 2 and TSCA Title VI emission standards.
9. Warranty and Customer Support
Meilocar is committed to customer satisfaction. While specific warranty details may vary by retailer or region, please refer to your purchase documentation for warranty information.
For any installation problems, missing parts, damaged components, or other after-sales issues, please contact our customer support team:
- Online Support: Log in to your Amazon account, navigate to "Your Orders," find the relevant order ID, and click "Contact Seller."
- Our team aims to respond to inquiries within 24 hours.