Recci REP-W77 WRRRIOR ANC Wireless Bluetooth 5.3 In-Ear Airpods User Manual

Introduction

Thank you for choosing the Recci REP-W77 WRRRIOR ANC Wireless Bluetooth 5.3 In-Ear Airpods. This manual provides essential information for setting up, operating, and maintaining your new earbuds. Please read it carefully before use to ensure optimal performance and longevity of your device.

Package Contents

Recci REP-W77 WRRRIOR ANC Wireless Bluetooth 5.3 In-Ear Airpods (Left and Right Earbuds)
Charging Case
USB Charging Cable
User Manual (this document)

Product Overview

Familiarize yourself with the components of your Recci REP-W77 earbuds.

Recci REP-W77 earbuds in their charging case, displaying battery percentage.

Figure 1: Recci REP-W77 earbuds housed in their charging case, showing the digital battery display.

Earbud Components

Touch Control Area: For playback, calls, and ANC control.
Microphone: For calls and voice assistant.
Charging Contacts: Connects to the charging case.
LED Indicator: Shows pairing status and battery level.

Charging Case Components

Earbud Slots: Securely holds and charges the earbuds.
Digital Display: Shows the charging case battery percentage and individual earbud charging status (L/R).
USB-C Charging Port: For charging the case.

Setup

1. Charging the Earbuds and Case

Place the earbuds into the charging case. Ensure the charging contacts align.
Connect the USB charging cable to the charging port on the case and to a power source (e.g., USB wall adapter, computer USB port).
The digital display on the charging case will show the battery percentage. The 'L' and 'R' indicators will flash while earbuds are charging and turn solid when fully charged.
Allow approximately 1-2 hours for a full charge of both the earbuds and the charging case.

Recci REP-W77 earbuds and charging case next to a smartphone playing music.

Figure 2: Earbuds and charging case, illustrating their use with a smartphone.

2. Bluetooth Pairing

Power On: Open the charging case. The earbuds will automatically power on and enter pairing mode. The LED indicator on one earbud will flash blue and red, indicating it's ready to pair.
Activate Bluetooth: On your smartphone or other Bluetooth device, go to the Bluetooth settings and enable Bluetooth.
Select Device: Look for "REP-W77" in the list of available devices and select it to connect.
Confirmation: Once successfully paired, the earbud LED indicators will turn off, and you will hear an audible confirmation.
Reconnect: After initial pairing, the earbuds will automatically connect to the last paired device when taken out of the case, provided Bluetooth is enabled on the device.

3. Wearing the Earbuds

For optimal sound quality and comfort, ensure a proper fit.

Identify the 'L' (left) and 'R' (right) markings on the earbuds.
Gently insert each earbud into the corresponding ear canal.
Rotate the earbud slightly until it feels secure and comfortable. A good seal is crucial for effective Active Noise Cancellation (ANC) and bass response.

A person wearing a Recci REP-W77 earbud, demonstrating comfortable fit.

Figure 3: Earbud worn in ear, highlighting the ergonomic design for comfort.

Operating Instructions

The Recci REP-W77 earbuds feature intuitive touch controls. The following actions are performed by tapping the touch control area on either earbud.

Music Playback

Play/Pause: Single tap on either earbud.
Next Track: Double tap on the right earbud.
Previous Track: Double tap on the left earbud.

Call Management

Answer/End Call: Single tap on either earbud.
Reject Call: Press and hold either earbud for 2 seconds.

Active Noise Cancellation (ANC) Control

The REP-W77 features ANC to reduce ambient noise.

Toggle ANC/Transparency Mode: Triple tap on either earbud to cycle between ANC On, Transparency Mode, and ANC Off.

Voice Assistant

Activate Voice Assistant: Press and hold either earbud for 3 seconds.

Maintenance

Cleaning

Use a soft, dry, lint-free cloth to clean the earbuds and charging case.
Do not use harsh chemicals, cleaning solvents, or strong detergents.
Gently clean the ear tips and charging contacts to prevent debris buildup.

Storage

Always store the earbuds in their charging case when not in use to protect them and keep them charged.
Store in a cool, dry place away from extreme temperatures and direct sunlight.

Battery Care

To prolong battery life, avoid fully discharging the earbuds and charging case frequently.
Charge the device regularly, even if not in frequent use.

Troubleshooting

If you encounter issues with your Recci REP-W77 earbuds, refer to the following common solutions.

Problem	Possible Solution
Earbuds not pairing	Ensure earbuds are charged and out of the case. Turn off and on Bluetooth on your device. Forget "REP-W77" from your device's Bluetooth list and re-pair. Reset the earbuds (refer to manufacturer's website for specific reset instructions if needed).
No sound from one earbud	Ensure both earbuds are charged. Place both earbuds back in the case, close it, then open it again. Try re-pairing the earbuds.
Charging case not charging	Check the USB cable and power adapter. Ensure the charging port is clean and free of debris. Try a different charging cable or power source.
ANC not working effectively	Ensure earbuds are properly seated in your ears to create a good seal. Confirm ANC is activated (triple tap to cycle modes).

Specifications

Key technical specifications for the Recci REP-W77 WRRRIOR ANC Wireless Bluetooth 5.3 In-Ear Airpods.

Model Name: REP-W77
Brand: RECCI
Connectivity Technology: Wireless
Wireless Communication Technology: Bluetooth 5.3
Headphones Form Factor: In Ear
Noise Control: Active Noise Cancellation (ANC)
Headphones Jack: No Jack
Color: BLACK
Package Dimensions: 16.7 x 11.6 x 4 cm
Item Weight: 120 g
Included Components: Cable

Warranty and Support

For warranty information or technical support, please refer to the warranty card included in your product packaging or visit the official RECCI website. You may also contact your retailer for assistance.

RECCI REP-W77