1. Introduction
Thank you for choosing the WOLTU BH414gr-2 Bar Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
Image 1: WOLTU BH414gr-2 Bar Stools (Set of 2)
2. Safety Instructions
- Read All Instructions: Before assembly and use, carefully read and understand all instructions.
- Weight Limit: Do not exceed the maximum weight capacity of 150 kg (approximately 330 lbs).
- Stable Surface: Always place the stool on a flat, stable, and level surface.
- Children: Keep children away from the assembly area. Do not allow children to play on or with the stool.
- Gas Lift: The gas lift mechanism contains pressurized gas. Do not attempt to disassemble or puncture it. Ensure the protective cover is removed from the gas lift before assembly.
- Regular Checks: Periodically check all bolts and connections to ensure they are tight and secure.
- Proper Use: Use the stool only for its intended purpose as seating. Avoid standing on the stool or using it as a ladder.
3. Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact WOLTU customer service.
- Seat Cushion (x2)
- Gas Lift (x2)
- Base (x2)
- Footrest (x2)
- Connecting Rod/Column (x2)
- Assembly Hardware (screws, washers, Allen key)
- Instruction Manual (this document)
4. Assembly Instructions
Assembly is straightforward and typically takes only a few minutes per stool. Follow these steps carefully:
- Prepare the Base: Place one base (round metal disc) on a flat, protected surface.
- Insert Gas Lift: Remove the protective cap from the top of the gas lift. Insert the wider end of the gas lift into the central hole of the base. Ensure it is seated firmly.
- Attach Footrest: Slide the footrest ring over the gas lift, ensuring it rests on the designated groove or support on the connecting rod.
- Connect Seat: Align the mounting plate under the seat cushion with the top of the gas lift. Gently press the seat onto the gas lift until it is securely attached.
- Test Functionality: Once assembled, test the height adjustment and swivel functions to ensure proper operation.
Image 2: Key Features and Components
Important: Ensure the black protective cap on the gas lift piston is removed before inserting it into the base. Failure to do so will prevent the height adjustment mechanism from functioning.
5. Operation
5.1 Height Adjustment
To adjust the height of the stool:
- To Raise: While standing, pull the lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
- To Lower: While seated, pull the lever located under the seat upwards. The seat will lower under your weight. Release the lever when the desired height is reached.
The stool's height can be adjusted between approximately 64 cm and 85 cm.
5.2 Swivel Function
The seat of the bar stool is designed to swivel 360 degrees, allowing for easy movement and access without repositioning the entire stool.
Image 3: Swivel and Height Adjustment Features
6. Maintenance
- Cleaning: For general cleaning, wipe the metal parts with a soft, damp cloth. For the fabric seat, use a mild fabric cleaner or a damp cloth. Avoid abrasive cleaners or harsh chemicals.
- Inspection: Periodically inspect all connections and moving parts. Tighten any loose screws or bolts.
- Avoid Overloading: Do not place excessive weight on the stool.
- Protect Floors: The base of the stool has an anti-slip ring. Ensure this ring is clean and intact to protect your flooring.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool does not adjust height. | Protective cap still on gas lift. | Remove the black protective cap from the top of the gas lift. |
| Stool is wobbly. | Loose connections or uneven surface. | Ensure all screws are tightened. Place the stool on a flat, level surface. |
| Squeaking noise during swivel. | Lack of lubrication or loose parts. | Apply a small amount of silicone spray to the swivel mechanism. Check for loose connections. |
8. Specifications
- Model Number: BH414gr-2
- Color: Grey
- Material: Elastic Fabric (seat), Metal (frame)
- Overall Dimensions (L x W x H): 41 x 41 x 85 cm (approximately 16.1 x 16.1 x 33.5 inches)
- Adjustable Height Range: 64 cm - 85 cm (approximately 25.2 inches - 33.5 inches)
- Seat Diameter: 39 cm (approximately 15.4 inches)
- Base Diameter: 41 cm (approximately 16.1 inches)
- Item Weight: 14.1 kg (per stool, approximately 31 lbs)
- Maximum Load Capacity: 150 kg (approximately 330 lbs)
- Features: 360° Swivel, Adjustable Height, Footrest, Breathable Mesh Fabric, High-Density Sponge Cushion, Stable Metal Base with Anti-slip Ring.
Image 4: Product Dimensions
9. Warranty and Support
WOLTU products are manufactured with quality and durability in mind. While specific warranty details are not provided in this manual, please retain your proof of purchase.
For any questions, missing parts, or issues not covered in this manual, please contact WOLTU customer service through the retailer where you purchased the product or visit the official WOLTU website for support information.
WOLTU GmbH
Visit the WOLTU Store on Amazon