Garden Winds LCM2079SG-RS
Instruction Manual
Garden Winds Custom Fit Replacement Canopy Top Cover and Sunwall
Model: LCM2079SG-RS | Brand: Garden Winds
Product Overview
This manual provides essential information for the proper installation, use, and maintenance of your Garden Winds RipLock 350 Replacement Canopy Top Cover and Sunwall. This product is designed as a custom-fit replacement for the Ozark Trail 8' x 10' outdoor pop-up canopy, specifically compatible with manufacturer's model numbers WMT-108104 and 30433.
The replacement canopy features RipLock 350 fabric with Ultra Stitch technology, offering enhanced durability and protection. It is important to verify your existing canopy frame's model number to ensure compatibility.
Key Features
- RipLock 350 Fabric: 350 Denier Polyester Fabric with double RipLock Technology, featuring double-walled high tensile strength gridlines designed to prevent rips from spreading.
- Ultra Stitch: Reinforced 4-ply thread stitching for superior seam strength and pull resistance.
- UPF 50+ Protection: Provides excellent protection against harmful UVA and UVB rays, reducing the risk of premature skin aging and sunburn.
- Water Resistant: Designed to repel water, offering protection from light rain.
- CPAI-84 Fire Retardant: Fabric meets fire retardancy standards for safety.
- Custom Fit: Specifically designed for Ozark Trail 8' x 10' frames (WMT-108104, 30433), measuring approximately 119" x 96" for the canopy and 99" x 40" for the sunwall.

Figure 1: Diagram highlighting the advanced features of the RipLock 350 fabric, including double riplock technology, ultra stitch, UPF 50+ protection, and fire resistance.
Important Safety Information
Please read and understand all safety warnings before assembling or using the canopy. Failure to follow these instructions may result in injury or damage to the product.
- Always ensure the canopy is properly assembled and securely anchored to a stable foundation. Use all provided tie-downs and stakes.
- Keep the canopy away from open flames, heaters, and other heat sources. The fabric is fire retardant but not fireproof.
- Do not use the canopy during severe weather conditions, including thunderstorms, heavy rain, strong winds, or snow. High winds can cause the canopy to lift and become a hazard.
- Regularly inspect the canopy and frame for any signs of wear, damage, or loose connections. Do not use if damaged.
- Ensure proper ventilation if using any heating or cooking appliances underneath the canopy.
- This product is a replacement canopy and sunwall only. The metal structure, netting, and privacy curtains are not included.
Setup and Installation
This replacement canopy is designed to fit the original Ozark Trail 8' x 10' pop-up canopy frame. Ensure your frame is clean and free of debris before installation.
- Prepare the Frame: Fully extend your existing Ozark Trail 8' x 10' pop-up canopy frame. Ensure all locking mechanisms are engaged and the frame is stable.
- Remove Old Canopy (if applicable): Carefully remove the old canopy top from the frame.
- Position the New Canopy: Unfold the Garden Winds replacement canopy. Identify the corners and the peak. Drape the canopy over the fully extended frame, aligning the corners of the canopy with the corners of the frame.
- Secure Corners: Attach the canopy to the frame at each corner. Most pop-up canopies have hook-and-loop fasteners or elastic straps at the corners. Ensure these are securely fastened.
- Attach to Frame Beams: Work your way around the canopy, attaching it to the frame beams using any integrated hook-and-loop straps or ties. Ensure the fabric is taut and evenly distributed over the frame.
- Install Sunwall: If using the included sunwall, identify the attachment points on the canopy and frame. Typically, sunwalls attach with hook-and-loop fasteners or clips along one side of the canopy. Secure it firmly.
- Final Adjustments: Once the canopy and sunwall are attached, make any final adjustments to ensure the fabric is tight and wrinkle-free. This helps with water runoff and wind resistance.
- Anchor the Canopy: Always use stakes or weights to anchor the canopy frame to the ground, especially in windy conditions.

Figure 2: The Garden Winds replacement canopy and sunwall installed on a compatible pop-up frame.

Figure 3: Detail of a frame connection point, illustrating typical attachment methods for the canopy fabric.
Operating and Usage Guidelines
To maximize the lifespan and performance of your canopy, adhere to the following guidelines:
- Weather Conditions: While water resistant, this canopy is not designed for heavy rain or strong winds. Always take down the canopy during adverse weather to prevent damage to the fabric and frame.
- Sun Protection: The UPF 50+ rating provides excellent UV protection. However, prolonged exposure to direct sunlight can still cause fading over time.
- Ventilation: Ensure adequate airflow, especially on hot days, to prevent heat buildup under the canopy.
- Supervision: Do not leave the canopy unattended for extended periods, particularly in unpredictable weather.
Maintenance and Care
Proper maintenance will extend the life of your replacement canopy.
- Cleaning: Clean the canopy fabric with mild soap and water. Do not use harsh detergents, bleach, or abrasive cleaners, as these can damage the fabric's protective coatings. Rinse thoroughly and allow to air dry completely before storing.
- Drying: Never store the canopy while it is wet or damp, as this can lead to mildew growth and fabric degradation.
- Storage: When not in use, remove the canopy from the frame and store it in a cool, dry place, away from direct sunlight and extreme temperatures. Folding it neatly will prevent unnecessary creases and wear.
- Inspection: Periodically inspect the fabric for any small tears or fraying. Address minor damage promptly to prevent it from worsening.

Figure 4: The replacement canopy fabric neatly folded for compact storage.
Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Canopy does not fit the frame. | Incorrect frame model or size. | Verify your original canopy frame's model number (WMT-108104 or 30433) and dimensions (8' x 10'). This replacement is custom-fit for these specific models. |
| Water pooling on the canopy. | Canopy not taut enough or frame not fully extended. | Ensure the frame is fully extended and locked. Adjust the canopy fabric to be as taut as possible, ensuring proper tension for water runoff. |
| Fabric appears wrinkled or loose. | Improper installation or insufficient tension. | Re-adjust the canopy on the frame, ensuring all attachment points are secured and the fabric is pulled tight and evenly distributed. |
| Canopy blows away in light wind. | Canopy not properly anchored. | Always use stakes, sandbags, or weights to securely anchor the canopy frame to the ground. Do not use in strong winds. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | Garden Winds |
| Model Number | LCM2079SG-RS |
| Compatible Frame Models | Ozark Trail WMT-108104, 30433 (8' x 10' frames) |
| Material | RipLock 350 Polyester Fabric (350 Denier) |
| Color | Slate Gray |
| Canopy Dimensions (Approx.) | 119" L x 96" W |
| Sunwall Dimensions (Approx.) | 99" L x 40" W |
| UV Protection | UPF 50+ |
| Water Resistance | Water Resistant |
| Fire Retardancy | CPAI-84 Fire Retardant |
| Item Weight | 4 Pounds |
| UPC | 717964081111 |
Warranty and Support
Garden Winds stands behind the quality of its products. For specific warranty information, product support, or to inquire about replacement parts, please visit the official Garden Winds website or contact their customer service directly.
You can find more information and contact details by visiting the Garden Winds Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.







