Introduction
Thank you for choosing the Yaheetech Tub Chair. This manual provides essential information for the safe and proper assembly, operation, and maintenance of your new armchair. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image: Front view of the Yaheetech Tub Chair, showcasing its design and green velvet fabric.
Important Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- All foam and upholstered surfaces meet flammability standards. Keep away from open flames or high heat sources.
- Supervise children and pets to avoid entrapment risks. This product is not intended for use by children.
- We recommend 1 or more people for assembly.
- The expected assembly time is approximately 1 hour.
- We recommend wearing protective gloves during assembly.
- Please follow the instruction manuals and use a pad to avoid damage during assembly.
Image: Important safety and assembly guidelines.
Package Contents
Before assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tub Chair Frame (main body)
- Seat Cushion
- Back Cushion
- 2 Lumbar Pillows
- 4 Tapered Legs
- Assembly Hardware (screws, washers, Allen key)
Image: Components and features of the Yaheetech Tub Chair.
Setup and Assembly
Follow these steps for proper assembly:
- Prepare the Area: Clear a spacious area for assembly. Place a protective pad or blanket on the floor to prevent scratches to both the floor and the chair components.
- Unpack Components: Carefully remove all parts from the packaging. Do not discard packaging until assembly is complete and you have confirmed all parts are present.
- Attach Legs: Locate the four tapered legs. Align each leg with the pre-drilled holes on the underside of the chair frame. Securely fasten the legs using the provided screws and Allen key. Ensure all legs are tightened evenly to prevent wobbling.
- Insert Cushions: Place the seat cushion onto the chair frame. Position the back cushion against the backrest.
- Add Lumbar Pillows: Place the two lumbar pillows as desired for additional comfort and support.
- Final Check: Once assembled, gently rock the chair to ensure stability. If any part feels loose, re-tighten the corresponding fasteners.
Image: Visual guide for proper unpacking and assembly practices.
Operating Instructions
The Yaheetech Tub Chair is designed for comfortable seating in various settings such as living rooms, bedrooms, or reading nooks.
- Seating: The chair features a high-resiliency foam seat cushion and polyester fiber-filled back cushion for optimal comfort and support.
- Lumbar Support: Utilize the two included lumbar pillows for additional back or head support as needed.
- Storage Pockets: The integrated side storage pockets provide convenient space for small items like remote controls, books, or magazines.
Image: The Yaheetech Tub Chair in a typical room environment, highlighting its functional design.
Maintenance
Proper care will extend the life and appearance of your Yaheetech Tub Chair:
- Cleaning: For general cleaning, use a soft cloth or sponge dampened with a mild cleaner specifically designed for upholstery. Gently wipe the surface of the product. Avoid harsh abrasive cleaners or solvents.
- Cushion Care: The back cushion and lumbar pillow covers feature zippered closures, allowing for easy removal for cleaning. Follow fabric care instructions on the label.
- Regular Checks: Periodically check all screws, nuts, and other fasteners (every 3 months) and re-tighten them as necessary to maintain stability.
- Sunlight Exposure: Avoid direct sunlight exposure to prevent fading of the fabric.
- Structural Integrity: If the product shows structural damage or poses a safety hazard, discontinue use and contact customer support.
Image: Detailed care instructions for upholstered furniture.
Troubleshooting
If you encounter issues with your Yaheetech Tub Chair, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels wobbly after assembly. | Legs not tightened sufficiently or unevenly. | Ensure all four legs are securely and evenly tightened. Check that the chair is on a flat, level surface. |
| Cushions feel too firm or too soft. | Initial use period or personal preference. | The foam may soften slightly with use. Allow some time for the cushions to adapt. |
| Fabric appears discolored or stained. | Exposure to direct sunlight or spills. | Avoid prolonged direct sunlight. For spills, blot immediately with a clean, dry cloth. Refer to maintenance section for cleaning. |
| Missing parts or damaged components upon arrival. | Shipping damage or packaging error. | Do not proceed with assembly. Contact Yaheetech customer support immediately for assistance. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | MM-00139538 |
| Colour | Green |
| Product Dimensions (W x D x H) | 102.5 cm x 75 cm x 85.5 cm |
| Item Weight | 22.9 kg |
| Maximum Weight Capacity | 136 kg (300 lbs) |
| Material Type | Velvet Fabric |
| Back Style | Tufted Back |
| Ground Clearance | 20 cm |
Image: Dimensional specifications of the Yaheetech Tub Chair.
Warranty and Support
For warranty information, please refer to the documentation included with your purchase or contact the seller directly. Yaheetech is committed to providing quality products and customer satisfaction.
If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact Yaheetech customer support through the retailer's platform or the official Yaheetech website. Please have your model number (MM-00139538) and purchase details ready when contacting support.
