Mytee Products Round Outrigger Pad Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of your Mytee Products Round Outrigger Pad. Designed for stability and support, these pads are crucial for various heavy-duty applications, including RV leveling, crane stabilization, and trailer support. Please read this manual thoroughly before use to ensure proper handling and longevity of the product.

Image 1.1: Mytee Products Round Outrigger Pad (Top View). This image displays the circular black outrigger pad with two green rope handles on opposite sides, designed for easy portability.

2. Safety Guidelines

Adhering to these safety guidelines is critical to prevent injury and damage to equipment.

• Always ensure the ground surface is stable and capable of supporting the combined weight of the equipment and its load.
• Position the outrigger pads centrally under the equipment's outrigger or jack foot to distribute weight evenly.
• Inspect pads for any damage or wear before each use. Do not use damaged pads.
• Avoid placing pads on extremely uneven or sloped surfaces that could compromise stability.
• Do not exceed the specified Working Load Limits (WLL) for the pads.
• Keep hands and feet clear of the outrigger pad area during equipment deployment and retraction.

3. Setup Instructions

Proper setup ensures maximum stability and safety for your equipment.

1. Site Assessment: Before deploying, assess the ground conditions. The surface should be as level and firm as possible. Remove any sharp objects, debris, or loose material that could interfere with the pad's stability or cause damage.
2. Pad Placement: Position the outrigger pad directly beneath the intended contact point of your equipment's outrigger or jack foot. Ensure the pad is centered to allow for optimal weight distribution.
3. Multiple Pads (for increased height): For applications requiring additional height, multiple outrigger pads can be stacked. Ensure they are aligned perfectly to maintain stability.

Image 3.1: Stackable Design for Increased Height. This image illustrates how multiple outrigger pads can be stacked to achieve greater height, emphasizing the ergonomic handles for easy movement.
4. Deployment: Slowly lower the equipment's outrigger or jack foot onto the center of the outrigger pad. Monitor the pad and surrounding ground for any signs of instability or sinking.

4. Operation

The outrigger pads are designed to provide a stable base for heavy equipment. Once properly positioned and the equipment is deployed, the pads will distribute the load over a larger surface area, reducing ground pressure and preventing sinking.

Image 4.1: Wide Usage Example. This image shows a large crane with its outriggers extended and resting on the Mytee Products outrigger pads, demonstrating their application in heavy machinery stabilization.

During operation, regularly check the stability of the equipment and the pads, especially in dynamic environments or over extended periods. The pads are made from Ultra-High Molecular Weight Polyethylene (UHMWPE), which offers high strength and durability.

Image 4.2: High Quality Material. This image focuses on the texture and composition of the outrigger pad, emphasizing its construction from Ultra-High Molecular Weight Polyethylene (UHMWPE) material.

5. Maintenance

Mytee Products Outrigger Pads require minimal maintenance due to their durable construction.

• Cleaning: After each use, clean the pads with water and a mild detergent to remove dirt, mud, or debris. Rinse thoroughly.
• Inspection: Periodically inspect the pads for any signs of wear, cracks, deep scratches, or deformation. Pay close attention to the edges and the surface. While designed to be unbreakable, extreme conditions or misuse can cause damage.
• Storage: Store pads in a dry, cool place away from direct sunlight when not in use. Their lightweight and stackable design facilitates easy storage.

Image 5.1: Durability Features. This image highlights the key attributes of the outrigger pad: its sturdy and long-lasting nature, weather and waterproof properties, and scratch resistance, ensuring minimal maintenance.

Image 5.2: Durable Construction Details. This diagram illustrates the design elements contributing to the pad's durability, including its non-conductive nature, recessed radius, safety-textured surface, and absence of sharp edges.

6. Troubleshooting

This section addresses common issues that may arise during the use of your outrigger pads.

7. Specifications

Detailed technical specifications for the Mytee Products Round Outrigger Pad (Model: ORP-Round-36x30).

• Model: ORP-Round-36x30
• Diameter: 36 inches
• Thickness: 3 inches
• Surface Area: 1296 square inches (9 square feet)
• Color: Black
• Crushing Rating: 300 PSI
• Material: Ultra-High Molecular Weight Polyethylene (UHMWPE)
• Handle Material: 2 Nylon Rope and PVC Hose
• 45 Degree Working Load Limit (WLL): 150,000 lbs
• Vertical Working Load Limit (WLL): 305,208 lbs
• Working Temperature Range: -176° F to 176° F (-115.5° C to 80° C)
• Weight: Approximately 110.2 pounds
• Features: Portable, Non-conductive, Non-Water Absorption, Recessed Radius, Safety-Textured Surface, No Sharp Edges
• UPC: 840223690479

Image 7.1: Dimensions of the Outrigger Pad. This image visually confirms the 36-inch diameter and 3-inch thickness of the ORP-Round-36x30 model, along with material and crush rating details.

Image 7.2: Outrigger Pad Specification Table. This table provides a comprehensive overview of various Mytee Products round outrigger pad models, detailing their SKU, Working Load Limits (Vertical and 45-Degree), Crush Rating (PSI), Dimensions (Diameter and Thickness), Weight (lbs), and Surface Area (Sq. Inches).

8. Warranty and Support

8.1. Warranty Information

Specific warranty details for Mytee Products Round Outrigger Pads are subject to the manufacturer's terms and conditions at the time of purchase. Please refer to your purchase documentation or contact Mytee Products directly for the most current warranty information.

8.2. Customer Support

For any concerns, questions, or technical assistance regarding your Mytee Products Round Outrigger Pad, please contact Mytee Products customer support:

• Toll-Free Number: 1 (888) 705 - 8277
• Operating Hours: Monday - Friday, 7 AM to 5 PM (Eastern Time)
• Website: Visit Mytee Products Store on Amazon