Introduction
Thank you for choosing the ENUOTEK Flexible LED Wall Mounted Reading Light. This manual provides essential information for the safe and efficient operation of your new reading lamp. Please read these instructions thoroughly before installation and use, and retain them for future reference.
Product Overview
The ENUOTEK RS-W11 is a versatile LED reading lamp designed for wall mounting. It features a flexible gooseneck, adjustable brightness levels, and multiple color temperature options to suit various lighting needs. Its compact design helps save space, making it ideal for bedrooms, studies, or work areas.
Image: The ENUOTEK Flexible LED Wall Mounted Reading Light, showcasing its flexible gooseneck design.
Package Contents
- 1 x ENUOTEK Flexible LED Wall Mounted Reading Light
- 1 x Wall Mount Base
- 1 x Adhesive Pad for mounting
- 2 x Screws and Wall Anchors for mounting
- 1 x User Manual
Image: Detailed diagram illustrating the dimensions of the lamp and its components, including the USB cable, lamp head, and mounting base.
Setup and Installation
Your ENUOTEK reading light offers two installation methods: adhesive mounting or screw mounting.
Method 1: Adhesive Mounting
- Clean Surface: Ensure the wall surface is clean, dry, and smooth.
- Attach Adhesive: Peel one side of the adhesive pad and firmly attach it to the back of the wall mount base.
- Mount Base: Peel the other side of the adhesive pad and press the base firmly onto the desired wall location for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before attaching the lamp.
- Attach Lamp: Slide the lamp's base into the mounted bracket, ensuring the USB cable is oriented downwards.
Image: Step-by-step illustration of attaching the adhesive pad to the base and then to the wall.
Method 2: Screw Mounting
- Mark Holes: Hold the wall mount base against the desired wall location and mark the positions for the two screw holes with a pencil.
- Drill Holes: Use a drill to create pilot holes at the marked positions. Insert the provided wall anchors into the pilot holes.
- Secure Base: Align the wall mount base with the anchors and secure it firmly using the provided screws.
- Attach Lamp: Slide the lamp's base into the mounted bracket, ensuring the USB cable is oriented downwards.
Image: Step-by-step illustration of marking, drilling, and securing the wall mount base with screws.
Power Connection
Connect the integrated USB male interface of the lamp to a standard USB power adapter (not included), a USB wall socket, or a USB table outlet. The lamp requires a 5V/1A USB power source.
Operating Instructions
The lamp features a sensitive touch switch integrated into the lamp head for easy control.
Brightness Adjustment (Dimmable)
- Power On/Off: Briefly press the touch switch to turn the lamp on or off.
- Adjust Brightness: With the lamp on, briefly press the touch switch repeatedly to cycle through 4 brightness levels: 100% > 70% > 35% > 15%. The lamp has a power-off memory function, retaining the last brightness setting when turned back on.
Image: Visual representation of the four brightness levels: 100%, 70%, 35%, and 15%.
Color Temperature Adjustment
- Adjust Color: With the lamp on, long-press the touch switch to cycle through 3 color temperature levels: Cool White (5000K) > Neutral White (4000K) > Warm White (3000K). The lamp also has a power-off memory function for the color temperature.
Image: Visual representation of the three color temperature settings: 5000K (Cool White), 4000K (Neutral White), and 3000K (Warm White).
Flexible Gooseneck
The lamp features a flexible steel gooseneck that allows for 360-degree rotation and adjustment. Position the lamp head to direct light precisely where needed, with a 120-degree wide lighting angle for even distribution.
Maintenance
- Cleaning: Disconnect the power before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: The LED components are integrated and not user-replaceable.
- Storage: If storing the lamp for an extended period, ensure it is clean, dry, and stored in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power supply or loose connection. | Check USB connection and power adapter. Ensure the power source is active. |
| Brightness or color temperature cannot be adjusted. | Incorrect operation of the touch switch. | Refer to the "Operating Instructions" section for correct short-press (brightness) and long-press (color temperature) actions. |
| Lamp flickers or light is unstable. | Insufficient power supply or faulty USB cable. | Ensure the USB power adapter provides sufficient power (5V/1A). Try a different USB cable or power adapter. |
Specifications
- Brand: ENUOTEK
- Model: RS-W11
- Light Source: LED (SMD2835 components)
- Power Consumption: 4W
- Brightness: Max 370 Lumens
- Dimmable Levels: 100%, 70%, 35%, 15%
- Color Temperatures: 5000K (Cool White), 4000K (Neutral White), 3000K (Warm White)
- Control Method: Touch Switch
- Gooseneck Flexibility: 360-degree adjustable
- Lighting Angle: 120 degrees
- Power Source: USB (5V/1A adapter not included)
- Material: Plastic PC (lamp head), ABS (lamp base), Steel (gooseneck)
- Product Dimensions: 3.46"D x 3.46"W x 18.5"H
- Item Weight: 8.8 ounces
- Indoor/Outdoor Usage: Indoor
Warranty & Support
This ENUOTEK product is covered by a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
For warranty claims, technical support, or any questions regarding your product, please contact ENUOTEK customer service through the retailer where you purchased the item or visit the official ENUOTEK website for contact information.
