Product Overview
This RONGJI car radio stereo is designed as a replacement dash kit for Nissan Versa Sedan models from 2015 to 2019. It features a 10.1-inch IPS touch screen, Android operating system, and supports both wired and wireless CarPlay and Android Auto.
Key Features
- 10.1-inch IPS Touch Screen (1280x720 resolution)
- Android OS with 4 Core CPU, 2GB RAM, 64GB ROM
- Built-in Wired/Wireless CarPlay & Android Auto
- Integrated Bluetooth for hands-free calling and audio streaming
- FM RDS Radio with automatic and manual search
- Built-in GPS navigation with worldwide map support
- 5G WiFi connectivity for app downloads and online navigation
- Split Screen Functionality
- Steering Wheel Control compatibility
- Support for AHD Rear Camera
Package Contents
Verify that all items listed below are included in your package.
Image description: An illustration showing the components included in the package. This includes the main head unit (machine), power cable, RCA cables, reversing camera cable, USB cables, microphone, and GPS antenna. For 8-core versions, additional audio out, 4G antenna, and extra USB plugs are shown.
- 1x Car Radio Head Unit (Machine)
- 1x Power Cable
- 1x RCA Cable Set
- 1x Reversing Camera Cable
- 1x USB Cable (for 4 Core)
- 1x Microphone
- 1x GPS Antenna
- 1x Car Dash Cam
- 1x 32GB Micro SD Card
Installation Guide
Vehicle Compatibility
This unit is compatible with Nissan Versa Sedan models from 2015 to 2019. Before installation, compare your vehicle's dashboard with the provided images to ensure compatibility.
Image description: A comparison image showing the car dashboard before and after the installation of the RONGJI car radio stereo. The top image shows the original factory radio, and the bottom image shows the new 10.1-inch touch screen unit installed.
Wiring Diagram
Refer to the following diagram for proper wiring connections. Ensure all cables are securely connected.
Image description: A detailed wiring diagram illustrating the connections for the RONGJI car radio stereo. It shows connections for power, audio, video, USB, microphone, GPS antenna, and reversing camera. Specific notes indicate that cables 1 and 2 (WiFi antenna, BT signal amplifier, reversing camera) must be connected to the model.
Basic Installation Steps (General)
- Disconnect the vehicle's battery.
- Carefully remove the original factory radio and dashboard trim.
- Connect the power cable, RCA cables, USB cables, microphone, and GPS antenna to the new head unit according to the wiring diagram.
- If installing an AHD rear camera, connect its cable to the designated input.
- Mount the new head unit into the dashboard opening.
- Reinstall dashboard trim.
- Reconnect the vehicle's battery.
- Test all functions of the new car stereo.
Initial Setup
First Power On
After installation, turn on your vehicle's ignition. The unit should power on automatically. Follow any on-screen prompts for initial setup, such as language selection and time zone.
Wi-Fi Connection
To access online features, connect the unit to a Wi-Fi network.
- Go to Settings > Network & Internet > Wi-Fi.
- Select your desired Wi-Fi network and enter the password.
Image description: An image illustrating the Wi-Fi support feature, showing the car radio screen displaying various online applications and a car graphic with Wi-Fi signals.
Operating Instructions
CarPlay & Android Auto
The unit supports both wired and wireless CarPlay and Android Auto for seamless smartphone integration.
Image description: An image showing the user interface for CarPlay and Android Auto on the car radio screen, displaying various app icons.
Connection Method 1 (Bluetooth)
- Ensure Bluetooth is enabled on your smartphone and the car stereo.
- Pair your smartphone with the car stereo via Bluetooth.
- On the car stereo, click on the "Tlink" application and wait for connection.
Connection Method 2 (USB Cable)
- Connect your smartphone to the car stereo using a USB cable.
- On the car stereo, click on the "Tlink" application and wait for connection.
Image description: A diagram showing two methods to connect CarPlay and Android Auto: one via Bluetooth and the "Tlink" app, and another via USB cable and the "Tlink" app.
GPS Navigation
The unit features a built-in GPS module for accurate positioning and real-time traffic conditions.
Image description: An image showing the GPS navigation interface on the car radio screen, displaying a map with route information and a satellite in the background.
To use navigation, ensure the GPS antenna is properly installed. You can download offline maps via the navigation app after connecting to Wi-Fi.
FM RDS Radio
Access the FM radio function to listen to your favorite stations. The unit supports automatic and manual station search.
Image description: An image showing the FM radio interface on the car radio screen, displaying frequency, station presets, and audio equalizer bars.
Bluetooth Function
The built-in Bluetooth allows for hands-free calling and audio streaming.
Image description: An image showing the Bluetooth phone interface on the car radio screen, with a dial pad and an incoming call screen on a smartphone.
- Pair your phone with the car stereo via Bluetooth settings.
- Use the dial pad on the screen or access your phonebook for calls.
- Stream music directly from your phone to the car stereo.
Steering Wheel Control
The head unit supports digital steering wheel controls, allowing you to manage music and calls without taking your hands off the wheel.
Image description: An image showing a hand operating steering wheel controls, with the car radio screen displaying a music player interface.
Configuration may be required in the unit's settings to map your vehicle's steering wheel buttons to the stereo functions.
Split Screen Function
The split screen feature allows you to display two applications simultaneously, such as navigation and music.
Image description: An image showing the split-screen functionality on the car radio, with a music player on one side and a navigation map on the other.
To activate, drag an app to one side of the screen, then select another app for the other side.
AHD Rear Camera Support
The unit supports an AHD rear camera for improved visibility when reversing.
Image description: An image showing a car backing up with a rear camera view displayed on the car radio screen, complete with parking guidelines.
Ensure the AHD camera is properly installed and connected to the designated input. The display will automatically switch to the camera view when the vehicle is in reverse.
Specifications
| Feature | Detail |
|---|---|
| Brand | RONGJI |
| Model Name | 2+64GB Car Radio |
| Screen Size | 10.1 Inches |
| Resolution | 720 x 1280 |
| Operating System | Android |
| Memory Storage Capacity | 64 GB |
| RAM | 2 GB |
| CPU | 4 Core |
| Special Features | Bluetooth, Touchscreen, CarPlay, Android Auto, GPS |
| Connectivity Technology | Bluetooth, Wi-Fi |
| Map Type | Worldwide |
| Supported Satellite Navigation System | GPS |
| Human-Interface Input | Microphone, Touchscreen |
| Mounting Type | Dashboard Mount |
| Included Components | 1* Car Dash Cam, 1* 32GB Micro SD Card |
Troubleshooting
No Power
- Check all power connections, especially the main power cable and ground wire.
- Verify the vehicle's fuse box for any blown fuses related to the car stereo.
- Ensure the vehicle's battery is properly connected and charged.
No Sound
- Check speaker wire connections.
- Ensure the volume is not muted or set to minimum.
- Verify audio output settings in the unit's menu.
GPS Signal Issues
- Ensure the GPS antenna is securely connected and placed in an unobstructed location (e.g., on the dashboard, away from metal).
- Check GPS settings within the navigation application.
Bluetooth Connectivity Problems
- Ensure Bluetooth is enabled on both the car stereo and your smartphone.
- Delete previous pairings and attempt to re-pair the devices.
- Restart both the car stereo and your smartphone.
CarPlay/Android Auto Not Connecting
- Ensure your smartphone is compatible with CarPlay/Android Auto.
- Try both wired and wireless connection methods.
- Verify the USB cable is functional if using a wired connection.
- Check the "Tlink" app on the head unit.
- Ensure your phone's operating system is up to date.
Screen Unresponsive
- Perform a soft reset of the unit (refer to the device's specific reset procedure, often a small reset button or holding the power button).
- Ensure the screen is clean and free of debris.
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact RONGJI customer service.
Manufacturer: Shenzhen Rongji Electronics Co., Ltd.