1. Introduction
Thank you for choosing the LeLuv Magna Pro+ Smart LCD Electric Penis Pump Kit. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before first use and retain it for future reference.
Figure 1: The LeLuv Magna Pro+ Smart LCD Electric Penis Pump Kit, showing the main pump unit and cylinder.
2. Important Safety Information
Please read and understand all safety warnings and instructions before using this product. Improper use can lead to injury.
- Consult a healthcare professional before use if you have any medical conditions or concerns.
- Do not use the device if you experience pain, discomfort, or irritation. Discontinue use immediately.
- Do not over-pressurize the cylinder. Follow recommended usage guidelines.
- Keep out of reach of children.
- This device is intended for personal use only.
Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
3. Package Contents
Verify that all items are present in your package:
- LeLuv Magna Pro+ Electric Pump Unit
- Medical-Grade Clear Acrylic Cylinder (12" x 3.25" ID)
- Medical-Grade Silicone Hose
- USB-C Charging Cable
- User Manual
4. Product Overview
The LeLuv Magna Pro+ features an advanced digital interface with both manual and intelligent smart modes, displayed on a clear LCD. It is designed for precise control and comfortable use.
Figure 2: Diagram illustrating the various controls on the LeLuv Magna Pro+ pump unit, including battery charge indicator, current vacuum display, mode buttons, power, release, smart button, and vacuum unit button.
Key Features:
- Smart LCD Display: For clear visibility of settings and vacuum levels.
- Manual & Smart Modes: Offers flexible control options.
- Rechargeable Lithium Battery: USB-C swift-charging for convenience.
- Hospital-Grade Vacuum Motor: Provides precise suction (60–64 KPA / 18–19 InHg).
- Ergonomic Design: Round flange base for even pressure distribution.
- Red Light Glow Display: Promotes comfort and reduces eye strain.
5. Charging the Device
Before first use, fully charge your LeLuv Magna Pro+ pump unit.
- Locate the USB-C charging port on the pump unit.
- Connect the provided USB-C cable to the pump unit and a compatible USB power source (e.g., wall adapter, computer USB port).
- The LCD display will indicate charging status. A full charge takes approximately 1 hour.
- A full charge provides up to 50 sessions or about 120 minutes of continuous operation.
Figure 3: The LeLuv Magna Pro+ pump unit connected to a USB-C charging cable, illustrating its universal charging capability.
6. Assembly and Setup
Follow these steps to assemble your LeLuv Magna Pro+ kit:
- Connect the Hose to the Cylinder: Ensure the cylinder is clean and dry. Push the male fitting of the hose straight down into the cylinder's port until it clicks.
- Lock the Connection: Keep pressing until the tab pops back out with a click.
- Check Connection: Give a gentle tug; the connection should be secure and air-tight.
- Connect the Hose to the Pump Unit: Attach the other end of the hose to the port on the pump unit.
Figure 4: Step-by-step visual guide on how to securely connect the cylinder to the pump unit, showing the unlock, insert, lock, and check actions.
Disconnecting the Cylinder:
- Unlock: Push the metal tab inward on the cylinder connection.
- Remove: Pull the hose straight up to release.
- Done: Release the tab. The fitting is now disconnected safely.
- Hold: The cylinder stays sealed – vacuum maintained after disconnection.
Figure 5: Visual instructions for safely disconnecting the cylinder from the hose, ensuring vacuum is maintained.
7. Operating Instructions
Familiarize yourself with the pump's controls before beginning a session.
Video 1: Official product video demonstrating the features and operation of the LeLuv Magna Pro+ pump.
7.1 Powering On/Off
- Press the Power Button (On/Off) to turn the device on or off. The LCD screen will illuminate.
7.2 Manual Mode
- When the device is on, it typically starts in Manual Mode.
- Use the Up/Down arrows (if present, or repeated presses of the power button/smart button to cycle) to adjust the vacuum level manually.
- The current vacuum level will be displayed on the LCD screen.
7.3 Smart Mode Operation
Smart Mode allows you to record, store, and automatically maintain your personalized vacuum pump level.
- Set Desired Vacuum Level: First, set your preferred vacuum level in Manual Mode.
- Record Vacuum Level: Hold the Smart Button for three seconds to record this vacuum level. A