Blissbud Spider RC Stunt Car T3-Blue&Red Instruction Manual

Introduction

This manual provides essential information for the safe and effective operation of your Blissbud Spider RC Stunt Car T3-Blue&Red. This remote control car features 360° rotation, 4-wheel drive, and a durable ABS construction, designed for various terrains and exciting stunts. Please read these instructions thoroughly before use.

Safety Information

Warning: Not for children under 3 years due to small parts.

• Always supervise children during operation.
• Avoid operating near water or in wet conditions to prevent electrical damage.
• Do not attempt to modify the product or its components.
• Ensure batteries are inserted with correct polarity.
• Remove batteries from the car and remote when not in use for extended periods.

What's in the Box

Verify that all items are present upon unboxing:

• 1x Blissbud Spider RC Stunt Car
• 1x Remote Control
• 1x USB Charging Cable
• 1x Screwdriver
• 2x Rechargeable Car Batteries
• 2x AA Batteries (for Remote Control)
• 1x Product Manual (this document)

Image: Contents of the Blissbud Spider RC Stunt Car package, including the car, remote, batteries, and tools.

Setup Guide

1. Charging the Car Batteries

1. Locate the two rechargeable batteries and the USB charging cable.
2. Connect one rechargeable battery to the USB charging cable.
3. Plug the USB charging cable into a compatible USB power source (e.g., computer, wall adapter).
4. The indicator light on the charging cable will show charging status (typically red for charging, off or green for fully charged).
5. Charging takes approximately 1 hour.
6. Once fully charged, disconnect the battery. You can charge the second battery while using the first for continuous play.

2. Installing Batteries in the Car

1. Using the provided screwdriver, open the battery compartment on the underside of the RC car.
2. Connect a fully charged rechargeable battery to the car's battery connector.
3. Carefully place the battery inside the compartment and close the cover, securing it with the screw.

3. Installing Batteries in the Remote Control

1. Using the provided screwdriver, open the battery compartment on the back of the remote control.
2. Insert the two AA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment and secure it with the screw.

4. Pairing the Car and Remote

1. Turn on the power switch on the RC car (usually located on the underside).
2. Turn on the power switch on the remote control.
3. The car and remote will automatically pair using 2.4GHz frequency. An indicator light on the remote may flash during pairing and become solid once connected.

Operating Instructions

Your Blissbud Spider RC Stunt Car is designed for dynamic play with multiple functions:

Basic Controls

• Forward/Backward: Use the left joystick to move the car forward or backward.
• Turn Left/Right: Use the right joystick to steer the car left or right.
• 360° Rotation: Manipulate both joysticks simultaneously to perform continuous 360-degree spins.
• 180° Flip & Double-Sided Driving: The car is designed to flip over and continue driving on its opposite side, allowing for seamless play even after impacts.

Image: Two children operating their RC stunt cars with remote controls, highlighting the 2.4GHz anti-interference feature for multiple players.

Terrain Versatility

The car's durable ABS material, powerful dual motors, and non-slip rubber tires allow it to operate on various surfaces:

• Indoor surfaces like carpet and hard floors.
• Outdoor terrains including grass, sand, and paved roads.
• The car can climb slopes up to 45 degrees and navigate small obstacles.

Image: The RC stunt car demonstrating its capability to drive on diverse surfaces such as sand, rocks, grass, and asphalt.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe down the car after use. Avoid water or harsh chemicals.
• Battery Care:
  • Always fully charge rechargeable batteries before first use.
  • Do not overcharge batteries.
  • Store batteries in a cool, dry place away from direct sunlight.
  • Remove all batteries from the car and remote if storing for an extended period to prevent leakage.
• Storage: Store the RC car and remote in a dry, cool environment away from extreme temperatures.

Troubleshooting

• Car not responding:
  • Ensure both the car and remote are powered on.
  • Check if batteries in both the car and remote are fully charged and correctly installed.
  • Re-pair the car and remote by turning both off and then on again.
• Reduced performance:
  • Recharge the car's battery.
  • Ensure the car is operating on a suitable surface.
• Interference:
  • Move away from other electronic devices that may cause signal interference.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official Blissbud website.