METEESER Car Radio User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your METEESER Android Car Stereo. This unit is specifically designed for Toyota Corolla and Levin models manufactured between 2014 and 2017, offering an enhanced in-car entertainment and navigation experience.

Key features include a 10.1-inch touch screen, Wireless CarPlay/Android Auto, GPS navigation, Wi-Fi connectivity, Bluetooth, FM/RDS radio, Mirror Link, Steering Wheel Control (SWC) compatibility, and a backup camera input.

Figure 1: METEESER Car Radio and included accessories.

2. Compatibility

This car stereo is compatible with the following vehicle models:

• Toyota Corolla (2014, 2015, 2016, 2017)
• Toyota Levin (2014, 2015, 2016, 2017)

Note:

• Important: This car stereo is not compatible with vehicles equipped with the original J-B-L audio system.
• Before installation, carefully check your vehicle's dashboard to ensure proper fitment. Dashboards with a small opening or sharp corners may not be compatible.

Figure 2: Dashboard compatibility guide.

3. Package Contents

Verify that all items listed below are included in your package:

• METEESER Android Car Stereo Unit
• HD Backup Camera
• GPS Antenna
• External Microphone
• Power Cord (Wiring Harness for plug-and-play installation)
• RCA Cable
• USB Cables (x2)
• User Manual
• Canbus Box
• Installation Tool
• Original USB Cable & Rear Camera Input Cable
• Accessories (mounting brackets, screws)

Figure 3: Package contents and unit dimensions.

4. Product Overview and Specifications

Key Features:

• Operating System: Latest Android 13 OS
• Processor: Quad-core processor
• Memory: 2GB RAM, 32GB ROM
• Display: 10.1-inch 1080P 2.5D glass touchscreen
• Connectivity: Wireless CarPlay/Android Auto, Wi-Fi, Bluetooth, Dual USB, FM/RDS
• Navigation: Built-in GPS for online/offline maps
• Multimedia: Video/subwoofer outputs, Mirror Link (iOS/Android), APE/FLAC/WAV/MP3/WMA audio, MKV/RMVB/AVI/MP4 video
• Integration: Steering Wheel Control (SWC), compatible with HD backup camera (included), dash cam, OBD, external mic
• Functionality: Split screen, file manager

Technical Specifications:

5. Installation Guide

The METEESER car radio is designed for plug-and-play installation with the provided wiring harness. While designed for ease of use, basic technical skills are recommended for optimal installation.

General Steps:

1. Preparation: Ensure your vehicle's ignition is off and disconnect the negative terminal of the car battery to prevent electrical shorts.
2. Remove Old Unit: Carefully remove the existing car radio and dashboard trim. Refer to your vehicle's service manual for specific instructions on trim removal.
3. Connect Wiring Harness: Connect the provided wiring harness to the car's existing wiring. Ensure all connections are secure.
4. Connect Accessories:
   • GPS Antenna: Connect the GPS antenna and position it in a location with a clear view of the sky (e.g., on the dashboard near the windshield).
   • Backup Camera: Connect the backup camera cable to the designated input on the car radio. Install the camera at the rear of the vehicle.
   • External Microphone: Connect the external microphone for improved call quality.
   • USB Cables: Connect the USB cables for external storage or wired CarPlay/Android Auto.
   • Canbus Box: Ensure the Canbus box is correctly connected. This component is crucial for integrating steering wheel controls, door-open notifications, and automatic backup camera switching.
5. Test Connections: Before fully reassembling the dashboard, temporarily reconnect the car battery and power on the unit to test basic functions (power, audio, touch screen, steering wheel controls, backup camera).
6. Secure Unit: Mount the METEESER car radio securely into the dashboard opening using the provided brackets and screws.
7. Reassemble Dashboard: Carefully reattach all dashboard trim pieces.
8. Final Check: Reconnect the car battery and perform a comprehensive test of all features.

Installation Tips:

• Wiring: Connect all provided wires, even if their purpose isn't immediately obvious. Some wires may act as antennas or enable specific vehicle integrations.
• Antenna Placement: For optimal signal reception, ensure antennas (GPS, Wi-Fi) are positioned correctly and not obstructed.
• Power Supply: The unit is sensitive to voltage. Ensure a stable power supply during testing to avoid auto-protect mode activation.

Figure 4: Rear ports of the car radio for wiring connections.

6. Initial Setup and Configuration

After successful installation, follow these steps for initial setup:

1. Power On: Turn on your vehicle's ignition. The car radio should power on automatically.
2. Language and Time: Follow the on-screen prompts to select your preferred language, time zone, and date settings.
3. Wi-Fi Connection:
   • Navigate to "Settings" > "Network & Internet" > "Wi-Fi".
   • Select your desired Wi-Fi network and enter the password to connect. This enables online features, app downloads, and map updates.
4. Bluetooth Pairing:
   • Go to "Settings" > "Connected devices" > "Bluetooth".
   • Enable Bluetooth on your smartphone and search for available devices.
   • Select the car radio's Bluetooth name (e.g., "METEESER Car Radio") and pair. Confirm the pairing code on both devices.
5. Steering Wheel Control Learning: If your vehicle has steering wheel controls, you may need to configure them.
   • Access the SWC settings in the unit's menu.
   • Follow the on-screen instructions to assign functions to each button.

7. Operating Instructions

7.1. Wireless CarPlay & Android Auto

Connect your smartphone wirelessly for seamless integration of navigation, music, calls, and messages.

1. Ensure Bluetooth and Wi-Fi are enabled on your smartphone.
2. On the car radio, open the CarPlay or Android Auto application.
3. Follow the on-screen prompts to connect your device. For first-time connection, you may need to confirm pairing on your phone.
4. Once connected, your phone's compatible apps will appear on the car radio's display.

Wired CarPlay/Android Auto is also supported by connecting your phone via a USB cable.

Figure 5: Wireless CarPlay and Android Auto interface.

7.2. GPS Navigation

The unit supports both online and offline navigation. Connect to Wi-Fi for online maps and real-time traffic updates, or download offline maps for use without an internet connection.

• Open the pre-installed navigation app (e.g., Google Maps, Waze) or download your preferred app from the app store.
• Enter your destination to begin navigation.

Figure 6: GPS Navigation and Wi-Fi connectivity.

7.3. FM/RDS Radio

Access your favorite radio stations with clear reception.

• Open the "FM Radio" application.
• Use the on-screen controls to scan for stations, manually tune, or select from presets.
• RDS (Radio Data System) provides additional information like station name and song title where available.

7.4. Bluetooth Functions

After pairing your phone, you can use Bluetooth for hands-free calling and audio streaming.

• Hands-Free Calling: Make and receive calls directly from the car radio's interface. Your contacts can be synced.
• Audio Streaming (A2DP): Play music from your smartphone through the car's speakers.

Figure 7: FM Radio and Bluetooth interface.

7.5. Split Screen Functionality

Multitask by running two applications simultaneously on the 10.1-inch display.

• To activate split screen, open an app, then long-press the recent apps button or drag an app to one side of the screen.
• Select a second app to occupy the other half of the screen.

Figure 8: Split screen and EQ DSP interface.

7.6. Steering Wheel Control (SWC)

Once configured during setup, use your vehicle's existing steering wheel buttons to control the car radio, enhancing driving safety and convenience.

• Common functions include volume adjustment, track skipping, mode switching, and answering/ending calls.

7.7. Backup Camera

The included HD backup camera provides a clear view of the area behind your vehicle when reversing.

• The display automatically switches to the backup camera view when the vehicle is put into reverse gear (requires proper Canbus connection).
• Features include HD image quality, night vision, and IP69 waterproof rating.

Figure 9: Backup camera view and steering wheel controls.

8. Maintenance

To ensure the longevity and optimal performance of your METEESER car radio, follow these maintenance guidelines:

• Screen Cleaning: Use a soft, lint-free cloth slightly dampened with water or a screen cleaner specifically designed for electronics. Avoid harsh chemicals or abrasive materials.
• Software Updates: Periodically check for software updates via Wi-Fi to ensure you have the latest features and bug fixes.
• Avoid Extreme Temperatures: Do not expose the unit to extreme heat or cold for extended periods.
• Protect from Liquids: Prevent liquids from entering the unit.
• General Care: Handle the unit with care to avoid physical damage.

9. Troubleshooting

If you encounter issues with your car radio, refer to the following common problems and solutions:

• Unit Does Not Power On:
  • Check all power connections and ensure the wiring harness is securely connected.
  • Verify the car battery is properly connected and charged.
  • Ensure the Canbus box is correctly installed, as it manages power signals.
  • Confirm the vehicle's ignition is on.
• No Sound:
  • Check speaker wire connections.
  • Ensure the volume is not muted or set to minimum.
  • Verify audio output settings in the unit's menu.
• Touch Screen Unresponsive:
  • Perform a soft reset by pressing and holding the power button until the unit restarts.
  • Ensure the screen is clean and free of debris.
• GPS Signal Lost/Inaccurate:
  • Ensure the GPS antenna is properly connected and has a clear view of the sky.
  • Check for obstructions that might block the signal.
  • Update map data via Wi-Fi.
• Bluetooth Connection Issues:
  • Ensure Bluetooth is enabled on both the car radio and your smartphone.
  • Delete previous pairings on both devices and attempt to re-pair.
  • Restart both devices.
• CarPlay/Android Auto Not Connecting:
  • Ensure Wi-Fi and Bluetooth are active on your phone.
  • Check USB cable connection for wired mode.
  • Verify that CarPlay/Android Auto is enabled in your phone's settings.
  • Restart the car radio and your phone.
• Steering Wheel Controls Not Working:
  • Ensure the Canbus box is correctly connected.
  • Re-perform the steering wheel control learning process in the unit's settings.

If the issue persists after attempting these solutions, please contact METEESER technical support.

10. Warranty and Technical Support

METEESER is committed to providing high-quality products and customer service.

• Warranty: This product comes with a 2-Year Warranty from the date of purchase.
• Technical Support: We offer Lifetime Technical Support for all our products. If you encounter any issues regarding compatibility, installation, or usage, please do not hesitate to contact us.

Contact Information:

Email: asd85hk@163.com

For prompt assistance, please include your product model number and a detailed description of the issue in your communication.

Figure 10: METEESER Technical Support details.