SJCAM C110+ Action Camera User Manual

1. Introduction

Welcome to the user manual for your new SJCAM C110+ Action Camera. This manual provides essential information on setting up, operating, and maintaining your camera to ensure optimal performance and longevity. Please read this manual thoroughly before using your device.

2. Package Contents

Verify that all items listed below are included in your package:

• SJCAM C110+ Action Camera
• Waterproof Case
• Bicycle Mount
• Adhesive Tape
• 6 Adhesive Mounts
• 2 Velcro Straps
• USB Cable
• User Manual
• 32GB MicroSD Card
• MicroSD Card Protective Case

Image: All components included with the SJCAM C110+ Action Camera.

3. Product Overview

The SJCAM C110+ is a compact and lightweight action camera designed for capturing high-quality video and photos in various environments. It features 4K video recording, 20MP photo capabilities, and 6-axis Electronic Image Stabilization (EIS).

Image: Front view of the SJCAM C110+ Action Camera, showing the lens and indicator lights.

Image: The SJCAM C110+ Action Camera's compact size, shown held in a hand and in a pocket, highlighting its portability.

4. Setup

4.1 Battery and MicroSD Card Installation

The SJCAM C110+ uses a Lithium-ion battery and supports MicroSD cards. A 32GB MicroSD card is included. Refer to the camera's physical design for the battery and MicroSD card slot locations, typically found under a protective cover. Ensure the MicroSD card is inserted correctly with the contacts facing the camera's interior.

4.2 Charging the Camera

Connect the camera to a power source using the provided USB cable. The camera's indicator light will show the charging status. A full charge is recommended before first use.

4.3 Mounting the Camera

The SJCAM C110+ comes with various mounting accessories, including a bicycle mount, adhesive mounts, and Velcro straps. Choose the appropriate mount for your activity and ensure the camera is securely attached before use.

Image: Examples of the SJCAM C110+ Action Camera mounted in various scenarios, including on a helmet, chest, and bicycle.

5. Operating Instructions

5.1 Power On/Off

To power on the camera, press and hold the Power button. To power off, press and hold the Power button again until the camera shuts down.

5.2 Mode Selection

The C110+ supports various modes, including Video, Photo, Time-Lapse, and Slow Motion. Use the Mode button to cycle through the available modes. The LCD screen will display the current mode.

Image: Visual comparison demonstrating the clarity differences between 4K 30FPS, 2K 30FPS, and 1080P 60FPS video resolutions.

5.3 Recording Video

In Video mode, press the Shutter/Record button to start recording. Press it again to stop recording. The camera supports 4K at 30 frames per second (FPS).

5.4 Taking Photos

In Photo mode, press the Shutter/Record button to take a picture. The camera captures photos at 20 megapixels.

5.5 Time-Lapse Photography

Select Time-Lapse mode to capture a series of photos over time, which are then compiled into a video. This allows for condensing long events into short, dynamic footage.

Image: An example of time-lapse photography, showing light trails from vehicles on a city bridge at night, illustrating how hours can be condensed into seconds.

5.6 Slow Motion Recording

Activate Slow Motion mode to record high-definition footage that plays back at a reduced speed, ideal for capturing fast-paced action with greater detail.

Image: An example of slow motion video, depicting motocross riders mid-air during a jump, highlighting the ability to capture detailed movement.

5.7 Electronic Image Stabilization (EIS)

The C110+ features 6-axis EIS to reduce blur and shake, ensuring smoother and more stable footage, especially during dynamic activities.

Image: A side-by-side comparison showing the effect of 6-axis gyro stabilization, with a blurred image on the left (EIS off) and a clear, stable image on the right (EIS on) of a mountain biker.

5.8 Using the Waterproof Case

The included waterproof case allows the C110+ to be submerged up to 30 meters (approximately 98 feet). Ensure the case is properly sealed before taking the camera underwater. Regularly check the case for any damage or debris that could compromise its waterproof seal.

Image: The SJCAM C110+ Action Camera mounted on a motorcycle helmet, demonstrating its use in outdoor activities. The camera's robust design and waterproof capabilities make it suitable for such environments.

6. Settings

Access the camera's settings menu via the LCD screen to adjust various parameters such as video resolution, photo resolution, EIS activation, exposure, white balance, and more. Navigate through the menu using the camera's buttons.

7. Maintenance

7.1 Cleaning

Use a soft, lint-free cloth to clean the camera lens and body. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals or abrasive materials.

7.2 Storage

Store the camera in a cool, dry place away from direct sunlight and extreme temperatures. Remove the battery if the camera will not be used for an extended period.

8. Troubleshooting

If you encounter issues with your SJCAM C110+, try the following basic troubleshooting steps:

• Camera not turning on: Ensure the battery is charged.
• Recording issues: Check if the MicroSD card is inserted correctly and has sufficient free space.
• Poor image quality: Clean the lens and ensure settings like resolution and EIS are configured appropriately.
• Water leakage: Immediately cease use and inspect the waterproof case for damage or improper sealing.

For more complex issues, please refer to the official SJCAM support resources.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the official SJCAM website or contact your local distributor. Keep your proof of purchase for warranty claims.