1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your HulkGoo RGB 6 Gang Switch Panel. This product is designed to provide centralized control for various electrical devices in 12V/24V vehicles such as cars, trucks, Jeeps, SUVs, boats, and marine applications. It features an ACC wired connection for stable performance and multiple circuit protections for enhanced safety.
2. What's in the Box
Verify that all components listed below are included in your package:
- Switch Panel
- Circuit Control Box
- ACC Wire
- Screw Kit
- Cable Ties
- Screwdriver
- Fuse Extender
- SP Mounting Brackets (for Switch Panel)
- CCB Mounting Brackets (for Circuit Control Box)
- 140PCS Sticker/Labels
- Instruction Manual
- APP Manual (Note: Primarily for APP-controlled variants, may not be applicable to this ACC Wired model)
- Circuit Breaker (60A)
- Wire Harness
Figure 2.1: Diagram showing all included components: Switch Panel, Circuit Control Box, ACC Wire, Screw Kit, Cable Ties, Screwdriver, Fuse Extender, SP Mounting Brackets, CCB Mounting Brackets, 140PCS Sticker/Labels, Instruction Manual, APP Manual, Circuit Breaker, and Wire Harness.
3. Specifications
| Feature | Detail |
|---|---|
| Operation Mode | Toggle switch |
| Current Rating | 80 Amps (Max) |
| Operating Voltage | 12V/24V DC |
| Contact Type | Normally Open |
| Connector Type | Plug In |
| Terminal | Screw |
| Circuit Type | 6-way |
| Actuator Type | Lever |
| Contact Material | Aluminum |
| Maximum Power (12V) | 720W |
| Maximum Power (24V) | 1440W |
| Operating Temperature | -40°C to 85°C |
| Dimensions | 12.2 x 8.7 x 3.3 inches (Package) |
| Weight | 3.7 Pounds (Package) |
Figure 3.1: Internal view of the circuit control box, detailing individual circuit ratings (30A, 20A, 20A, 15A, 15A, 10A) and connection points for battery and ACC wire.
4. Installation Guide
Follow these steps for proper installation of the switch panel and control box:
4.1 Wiring Connections
- Connect the circuit breaker to the positive terminal of the vehicle battery.
- Connect the other end of the circuit breaker to the positive input of the control box.
- Connect the negative terminal of the vehicle battery to the negative input of the control box.
- Connect the control box to the switch panel using the provided cable.
- Connect your auxiliary lights or devices to the output terminals of the control box. The positive wires of the lights connect to the respective circuit outputs, and the negative wires can be connected to a common ground point or the negative terminal of the control box.
- Ensure all connections are secure and properly insulated.
Figure 4.1: Wiring diagram illustrating the connection of the switch panel system to a 12V/24V battery, including the circuit breaker and ACC wire.
4.2 Mounting the Switch Panel and Control Box
The package includes mounting brackets for both the switch panel and the circuit control box, offering flexible installation options.
Figure 4.2: Illustration of two common mounting methods for both the switch panel and the control box, utilizing the provided brackets and screws.
5. Operating Instructions
The RGB 6 Gang Switch Panel provides intuitive control over your connected accessories.
5.1 Basic Operation
- Power On/Off: Press the power button on the switch panel to turn the unit on or off. The panel features a memory function, retaining the last settings.
- Switching Devices: Each of the 6 buttons controls a separate circuit. Press a button to activate or deactivate the connected device.
Figure 5.1: The switch panel interface, highlighting the power button, brightness control, RGB mode button, and six individual switch buttons for connected accessories.
5.2 Brightness and RGB Modes
- Brightness Adjustment: Use the dedicated brightness button to cycle through 5 levels of brightness (100%, 75%, 50%, 25%, 10%) for the panel backlighting.
- RGB Color Modes: Press the RGB button to cycle through 11 different RGB color modes, including R/G/B, Gradient, Jump, and Breathing effects.
- Lighting Modes: The panel supports 3 lighting modes: Constant Light, Momentary Mode, and Strobe Mode. Refer to the APP Manual (if applicable) or specific instructions for advanced configuration.
5.3 Customizing Labels
The product includes 140 reusable labels to customize the function of each switch button. Select the appropriate label for your connected device and apply it to the corresponding switch.
Figure 5.2: A selection of 140 customizable labels provided to personalize the switch panel functions.
6. Safety Information
The HulkGoo 6 Gang Switch Panel is designed with multiple safety features to protect your vehicle and connected devices:
- Overload Protection: Prevents damage from excessive current draw.
- Overcurrent Protection: Safeguards circuits against currents exceeding their rated capacity.
- Overvoltage Protection: Protects components from voltage spikes.
- Reverse Polarity Protection: Prevents damage if power connections are accidentally reversed.
- Current Breaker Protection: An external circuit breaker (60A) provides primary protection for the entire system.
- Drip-Seal Waterproofing: The control box is designed to resist water ingress, ensuring reliable operation in various environmental conditions.
- Operating Temperature: Designed to function reliably in extreme temperatures from -40°C to 85°C.
Always ensure proper wiring and adhere to the maximum current ratings for each circuit to maintain optimal safety and performance.
7. Maintenance
To ensure the longevity and optimal performance of your switch panel, consider the following maintenance tips:
- Regular Cleaning: Periodically wipe the switch panel surface with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners.
- Connection Checks: Annually inspect all wiring connections to ensure they remain tight and free from corrosion.
- Fuse Inspection: If a circuit fails, check the corresponding blade fuse in the control box. Replace blown fuses with ones of the same amperage rating.
- Environmental Protection: While the unit is waterproof, avoid prolonged submersion or direct high-pressure water jets.
8. Troubleshooting
If you encounter issues with your switch panel, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Panel does not power on. | No power from battery; main circuit breaker tripped; loose power connection. | Check battery voltage. Inspect the main circuit breaker and reset if tripped. Verify all power connections to the control box and battery. |
| A specific accessory does not turn on. | Blown fuse for that circuit; loose connection to accessory; faulty accessory. | Check the corresponding blade fuse in the control box and replace if blown. Ensure the accessory's wiring is securely connected to the control box. Test the accessory directly if possible. |
| Panel backlighting is dim or off. | Brightness setting is low; power issue. | Press the brightness adjustment button to cycle through brightness levels. Check main power connections. |
| RGB modes are not changing. | RGB button not pressed correctly; internal fault. | Ensure the RGB button is pressed firmly. If the issue persists, contact customer support. |
9. Warranty and Support
HulkGoo stands behind the quality of this product with a 3-year guarantee. This warranty covers manufacturing defects and ensures reliable operation under normal use.
For technical support, warranty claims, or any questions regarding your RGB 6 Gang Switch Panel, please contact HulkGoo customer service through the retailer where the product was purchased or visit the official HulkGoo website for contact information.
Please retain your proof of purchase for warranty validation.